ATM_ID: 37EF37E0-7590-1014-8825-B20C57619FB6

MFF:

PLANNEDTIMESTAFF:

ID: DPQA_Regression_Connectivity/Testcases/FS_55.003_Direct_connectivity/84441

TESTCASE_HEADLINE: To verify the usage of / in the document root

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: 1.  Direct printing through driver should be enabled on the device (WebUI-Properties-Connectivity-setup-USB connection mode-Check "Direct Printing via driver". 
<P>2. Connect the USB type B port to any of the USB card slot in the Mac PC  and with the working MFD. Using the mac client debug console, identify the port number to which the USB type B port is connected to the MFD.
--------------------------  
Steps to find the port number from debug log monitor:
Request/Response on multiple interfaces: 
 <P>1.sudo defaults write configd com.apple.ippusb.loglevel 2;
<P>2. sudo defaults write configd com.apple.ippusbd.loglevel 2;
<P>3. sudo sudo sed -i .ORIG 's/\\[<= Level notice\\]/[<= Level debug]/' /etc/asl.conf
<P>4. sudo killall -HUP syslog
 <P>5. sudo syslog -F std.4 -w -k Sender configd -o -k Sender ippusbd
----------------------------
<P>3.  IPP should be enabled on the device.
<P>4. Airprint should be enabled on the device.
<P>5. Perform an IPP print job with the help of the below command:
<P> ipptool -tv -f print-job.test ipp://localhost:port #/ipp/print print-job.test\
Note: Port Number may differ based on the Mac port that is connected with the device."

PROCEDURE: 1. Verify the usage of "/"in the request and in the response of the document path with the help of the debug log monitor ( As mentioned in the Pre-condition step -2, get the debug logs). 
<P>2. Verify the success rate of the performed IPP print job with the usage of the received port number in the debug log monitor.
<P>3. Check the above steps with invalid port number.

OUTPUT: 1. Send request and received response should possess the usage of "/" as like HTTP/X.X (Version) .

<P>2. Performed IPP job should be successful.

<P>3. Invalid port number should not be recognized by the IPPTOOL and the performed operation should get rejected.

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: FS 55.003 Direct Connectivity

SPEC_VERSION: 1.0027999999999999

SPEC_TAG: [55.003.031.002] (FT-17796) [D3.6 - *]The HTTP service shall use “/” as its document root.

ATM_OWNER:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1478590916

MDATE: 1478590916, 1478590982, 1483518521, 1501222460

MUSER: q3sjpj97, q3sjpj97, q3sjpj97, w3K3WRKH

AUTHOR: q3sjpj97

ATM_MCOMMENTS: Imported from spreadsheet, Requirement Mapping, Renamed from "DPQA_NewFeature/D3.6/FT-16947_R1214-05-Airprint_IPP_USB_Test_cases/84441"., Renamed from "DPQA_Regression_Connectivity/Testcases/FS_55.003_Direct_connectivity/_FT-16947_R1214-05-Airprint_IPP_USB_Test_cases/84441".

HISTORY:

ATM_LOCKED:

ATM_REQLINK: 59EF744E-7B26-1014-A353-E43156C5BF1E

ATM_REQCOUNT: 1

QA_TEAM:

TC_WEIGHTAGE:

FILENAME:

FILEDESC:

FILES: