1.MFD is in wired mode.
2.MFD should be flashed with D3.6 or above builds.
3. WebUI must be accessible.
4. User should Logged in as SA.
5. Ensure zero configuration (auto IP) disabled from MFD.
PROCEDURE:
1. From Server manager, deactivate the scope for DHCPv4.
2. Reboot the MFD.
3.MFD will not obtain any IP address once it's came to ready state.
4. In Device backchannel, enter the below command attach_cc
5. Select option 2 (App main menu)
6. Then type "z" and enter
7. Select option 12 (status manager menu)
8.Select option 1 (Display status list)
9.Check for status code 17-524-02 under display status list.
10.Now re-activate the DHCPv4 scope from server manager and wait for some time.
11. Device will acquire an ip address through DHCP.
OUTPUT:
1. A Status message should display on the Device LUI, SR2 region stating "No IPv4 Connectivity. The device failed to dynamically obtain an IPv4 address from a server. Notify your local System Administrator."
2.Status Code 17-524-02 should be generated and listed under Display status list.
3.Status message should be cleared from the device SR region once DHCPv4 scope re-activated from server manager and device gets an ip address through DHCP.