ATM_ID: 6F1764B6-83A8-1014-8C74-16B557619FB6 MFF: PLANNEDTIMESTAFF: ID: DPQA_Regression_Connectivity/Testcases/FS_55.020_Connectivity/90971 TESTCASE_HEADLINE: Verify Status Code 17-532-02 shall be genarate when the device failed to dynamically obtain an IPv6 address from a server for the Ethernet interface and no DHCPv6 assigned IPv6 address available. GROUP: FEATURE: SUB_FEATURE: INPUT:
1.MFD is in wired mode.
2.MFD should be flashed with D3.6 or above builds.
3. WebUI must be accessible.
4. User should Logged in as SA.
5. Make sure that IPv6 option is enabled and DHCPv6 option is disabled in MFD.
PROCEDURE:1.Remove the Ethernet cable from MFD and in DHCP server restrict the DHCPv6 scope for two clients.
2.Connect two devices to DHCP enabled network.
3.Now connect the MFD to the DHCP server as a third client.
4. Check the IPv6 address provided by the DHCP server.
5. In Device backchannel, enter the below command attach_cc
6. Select option 2 (App main menu)
7. Then type "z" and enter
8. Select option 12 (status manager menu)
9.Select option 1 (Display status list)
10.Check for status code 17-532-02 under display status list.
1.MFD shoud not fetch any IP address from DHCP server.
2.A Status message should display on the Device LUI, SR2 region stating"IPv6 Connectivity may be Limited. The device failed to dynamically obtain an IPv6 address from a server. No DHCPv6 assigned IPv6 address available. Notify your local System Administrator."
3.Status Code 17-532-02 should be generated and listed under Display status list.