ATM_ID: FB1F71D8-7AA5-11E7-992E-926ED30A4651 MFF:

PLANNEDTIMESTAFF: ID: DPQA_Regression_Connectivity/Testcases/FS_55.050_Wireless_Connectivity/101143 TESTCASE_HEADLINE: To Verify the "Default All" functionality /behavior available in Wireless settings page from CWIS. GROUP: FEATURE: SUB_FEATURE: INPUT:

  1. Upgrade the MFP with latest software version.

  2. Wired 802.1x settings should be pre-configured but Wired 802.1x should be disabled

PROCEDURE:

Process

#

Test Procedure

Expected Results


  1.   1. Login as SA from CWIS.

      2. Navigate through Properties -> Connectivity ->Xerox Wireless Network Interface ->Wireless Settings page.

      3. Select a network/SSID from the listed wireless networks.

      4. Configure the network with proper/valid credentials and save the settings.

      5. Navigate back to Properties -> Connectivity page and activate the Wireless Network Interface.

      6. Once the wireless connection is activated

     â€śDefault All”/"Reset to Defaults" settings should not alter the below settings state/value,

    • Enablement state of the wireless interface (should remain "Enabled")
    • Wired 802.1X Enablement state (should remain "Disabled")
    • Wired 802.1X settings (should hold the last configured value)


  2. MFD will fetch a new IP which will be shown in device LUI.

      * Open the CWIS of MFD with the fetched IP address.

      * Navigate through Properties -> Connectivity ->Xerox Wireless Network Interface ->Wireless Settings page.

      * Click "Default All" button and wait for the WebUI response.

      * From LUI Navigate to Device -> Tools -> Network Settings -> Network Connectivity page and check the enablement state of Wireless profile and the status of last configured wireless network (As the Wireless settings got reset


  3. MFD will not get IP address hence check should be done from LUI).

      * Navigate through Device -> Tools -> Network Settings -> Advanced settings page and check whether the,
        â€˘ 802.1x is active or not
        â€˘ 802.1x settings are altered or unaltered
OUTPUT:

 â€śDefault All”/"Reset to Defaults" settings should not alter the below settings state/value,

• Enablement state of the wireless interface (should remain "Enabled")
• Wired 802.1X Enablement state (should remain "Disabled")
• Wired 802.1X settings (should hold the last configured value)

PROCESS: PRIORITY: TEST_TYPE: LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: TEST_CASE_TYPE: TESTCASE_SOURCE: SPEC: FS 55.050 Wireless Connectivity SPEC_VERSION: 1.0029 SPEC_TAG: [55.050.039.01] (FT-21739) [D4.0 - *] Resetting the wireless interface settings to default shall not alter the enablement state of the wireless interface. (i.e. If the wireless interface is the active interface, it will remain the active interface. If the wireless interface is not active, it will remain inactive.) ATM_OWNER: APPROVE_QE: APPROVED_QE: APPROVE_SE: Yet to be Reviewed by SE APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_APPROVALS: CDATE: Aug 06 6:21PM IST MDATE: 1502023895, 1533042136 MUSER: w493981W, q4BVX0J1 AUTHOR: S, MAHENDRA (External) ATM_MCOMMENTS: Imported from spreadsheet, Renamed from "DPQA_Regression_Connectivity/Testcases/FS_55.050_Wireless_Connectivity/Tag_to_TC_Conversion/101143". HISTORY: ATM_LOCKED: ATM_REQLINK: B292746A-54C1-11E7-8B33-5E56D40A4651 ATM_REQCOUNT: 1 QA_TEAM: TC_WEIGHTAGE: FILENAME: FILEDESC: FILES: