1. Make sure that the device is ready state with any D3.5 build.
2. Make sure that the USB Drive has a valid DLM file in an "Altboot" Folder.
3. Make sure that the front and rear ports are enabled.
4. Make sure that Network Configuration settings Settings involved in enhanced Cloning and device dependent settings are configured in device.
5. Make sure that the Web Certificates excluding local certificates and Certificate/policy config and Local Template Pool are configured in device.
PROCEDURE:1. Allow the device with the configured settings till midnight until clone to self is created.
2. Once the Clone to self is created upgrade the device via Non-Forced Altboot and verify that the all the configured settings are retained.
3. With clone to Self created with the settings configured upgrade the device using Forced Altboot.
4. Verify that the system parameters are restored to factory default and performing "Revert to previous Settings" applies the previously configured settings.
5. Modify some configuration settings in CWIS and perform WEB UI upgrade.
6. Verify that the Configured settings are retained.
7. Repeat Steps 5-6 for USB Manual Upgrade using Install File option.
OUTPUT:The implementation of this feature should not cause regression in existing upgrade functionality.
PROCESS: PRIORITY: TEST_TYPE: LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: TEST_CASE_TYPE: TESTCASE_SOURCE: SPEC: FS 22.080 Software Upgrade SPEC_VERSION: 1.0114000000000001 SPEC_TAG: [22.080.081] (FT-14212) CCSFEAT15607 Critical data and user settings shall be preserved by the USB Pendrive ALTBOOT (as summarised below): [22.080.081.1] (FT-14212) CCSFEAT15607.1 Network Configuration settings including: • IPv4/IPv6 Settings • [*-D3.5] Novell Protocol Settings • [*-D3.5] Appletalk Protocol Settings • Microsoft Network Settings • SLP Protocol Settings • [*-D3.5] SSDP Protocol Settings • USB Configuration Settings • [D2.3 - *] All Clonable Settings including Enhanced Cloning (device dependent) Settings [22.080.081.1.1] (FT-14212) CCSFEAT15607.1.1 [D2.6 - *] A forced ALTBOOT shall restore all system parameters to the factory default. No configuration values shall be automatically restored after a forced ALTBOOT. (Configuration values preserved during the last ALTBOOT can be manually restored via the Revert to Previous Settings tool. Please refer to section 5.5 of FS 22.060 Configuration Cloning and FS 1.007 Tools Overview.) [22.080.081.1.2] (FT-14212) CCSFEAT15607.1.2 [D2.2 - *] An unforced ALTBOOT shall restore all clonable settings and select device dependent settings per section 5.5 of FS 22.060 Configuration Cloning. These parameters shall automatically be restored as part of the unforced ALTBOOT process. [22.080.081.2] (FT-14212) CCSFEAT15607.2 User NVM settings (as described in FS 23.026 NVM Save & Restore). [22.080.081.3] (FT-14212) CCSFEAT15607.3 Web Certificates, excluding local certificates and Certificate/policy config (as described in FS 41.004 Digital Certificates). [22.080.081.4] (FT-14212) CCSFEAT15607.4 Local Template Pool Web User Interface created Scan to File templates (as described in FS 46.031 Scan Template Management). ATM_OWNER: APPROVE_QE: APPROVED_QE: APPROVE_SE: APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_APPROVALS: CDATE: 1493900022 MDATE: 1493900022 MUSER: q4BVX0J1 AUTHOR: q4BVX0J1 ATM_MCOMMENTS: Imported from spreadsheet HISTORY: ATM_LOCKED: ATM_REQLINK: 59604E75-8432-1014-BEEE-CEAC1273AA6F, 59627DC5-8432-1014-A3BF-FAE217FA55D5, 596701B9-8432-1014-8414-F82D926891FD, 596A15FB-8432-1014-996B-AE40770E27F7, 596CE70F-8432-1014-8E56-812EF907C17C, 596F4729-8432-1014-88F3-B7DC063F5E54, 5972228E-8432-1014-A46E-B493FFA140E2 ATM_REQCOUNT: 7 QA_TEAM: TC_WEIGHTAGE: FILENAME: FILEDESC: FILES: