ATM_ID: 9ABD1EEB-7077-1014-8B35-E745207B5465 MFF: PLANNEDTIMESTAFF: 1 ID: DPQA_Workflow_v2/Scan_To_Home/50311 TESTCASE_HEADLINE: [Use Case-Case 140] GROUP: scan FEATURE: copy_auditron SUB_FEATURE: INPUT: The device under test should be loaded with latest software. All the possile parameters should be configured using the assigned interface (CWIS,LUI or SNMP) PROCEDURE: [Common Settings-Wired-Xerox Secure Access-LDAP-XSA-IPV4] [Template Configuration-NA] [Filing Protocol-Scan to Home-SMB - Always file with Kerberos Ticket-No LDAP Query-Disabled (Append UserName)-Disabled (Auto create Username)] [Filing Policy-Add Date to Name] [Filing Address-Hostname] [XSM Enablement-Enabled] [Job Log(.XST)-Enabled] [Confirmation Sheet-Enabled] [Login Credentials-Always File with Kerberos Ticket] [File Format-PDF/A 1 File Per Page Image only] [OutputColor-Black & White] [2 Sided Scanning-2 Sided] [Lighten/Darken--3] [Sharpness--3] [Contrast-Manual Contrast 2] [Background Suppression-Auto Suppression] [Resolution-400] [File SizeQuality--1] [Remove Blank Pages-OFF] [Scan to Original Type-Photo & Text] [How Original was produced-Inkjet Original] [Original Orientation-Landscape Originals] [Edge Erase-Top] [Build Job-OFF] [Original Size input-Mixed Sized Originals - 11x8.5" and 11x17"] [Rotation Method-Not Applicable] [Mode of Input-DADH] , [46.050.003] (FT-14212) CCSFEAT17315 The supported Auto Background Suppression values are the following:, [46.050.005] (FT-14212) CCSFEAT17317 The supported Quality/File Size values are a 3-step range with an integer range of 0-255 and the following incremented steps:255%2c 128%2c 0 , [46.050.007] (FT-14212) CCSFEAT17319 The user shall be allowed to set the Darkness value between three steps below nominal (0) and three steps above nominal (0) in increments of one step where steps below nominal represent a lighter image and steps above nominal represent a darker image. , [46.050.030] (FT-14212) CCSFEAT17336 If an input document is 2 Sided%2c Edge Erase values set for Side 1 of the document shall be ‘mirrored’ over the x-axis for Side 2, [46.050.058] (FT-14212) CCSFEAT17363 The supported Original Type attribute values are the following:, [46.050.060] (FT-14212) CCSFEAT17365 The supported Original , [46.050.065] (FT-14212) CCSFEAT17385 The supported Output Color values are the following on devices enabled for color scanning:, [46.050.067] (FT-14212) CCSFEAT17387 The supported Pixel Depth values are the following:, [46.050.068] (FT-14212) CCSFEAT17388 The supported Resolution values are the following:, [46.050.070] (FT-14212) CCSFEAT17390 The user shall be allowed to set the Sharpness value between two steps below nominal (0) and two steps above nominal (0) in increments of one step where steps below nominal represent a softer image and steps above nominal represent a sharper image. , CCSFEAT6181 The SA shall be provided with a method for setting up XSA accounts and assigning limits., CCSFEAT6183 User ID%2c General Account and Group Account setup and modification method shall be provided via the Web UI, CCSFEAT6235 [* - D2.2] All User IDs and the system User ID on the XSA activity report shall be left blank, CCSFEAT14932 At the request of the SA the audit log shall be downloaded to the SA client PC via the webUI, CCSFEAT14932 At the request of the SA the audit log shall be downloaded to the SA client PC via the webUI, Event Id:-105%2c23%2c144%2c145%2c24%2c29%2c30%2c42 CCSFEAT21254 The audit log entry data shall report events contained in table 1 below: , [46.034.010] (FT-14212) CCSFEAT12741 The possible settings for Kerberos authentication for an SMB share are: , [46.034.011] (FT-14212) CCSFEAT12969 Table 1 Scan to Home Template DisplayI instances , [46.034.018] (FT-14212) CCSFEAT6780 Text strings shall exist for the following Scan to Home settings:, [46.034.016] (FT-14212) CCSFEAT19731 [CQ423770] [D2.2-*] [+L2] The XSM Subdirectory for Single Page - File Formats for Scan to Home is accessible via xcmSvcMonDetailsTable value 20.152.143.6. , [46.034.018.1] (FT-14212) CCSFEAT6780.1 [D2.2-*] XSM Subdirectory for Single Page - File Formats , [46.034.018.2] (FT-14212) CCSFEAT6780.2 [D2.2-*] Job Log (XST) , [46.034.020] (FT-14212) CCSFEAT14350 Confirmation Report shall provide details about Scan To Home job failures caused by invalid login credentials%2c invalid permissions or not existing home directories by reporting a login failure and suggesting to check passwords and/or setups., [46.034.012] (FT-14212) CCSFEAT12590 The system administrator may configure the system to use one of the four methods of obtaining repository login credentials, [11.238.004] (FT-14212) CCSFEAT5793 The expected output for scan services shall be as shown in Table 4., [25.000.002.2] (FT-14212) Duplex scanning; , [11.235.001] (FT-14212) The control shall have 7 levels: -3%2c -2%2c -1%2c 0%2c 1%2c 2%2c 3 where -3 will be the darkest and 3 will be the lightest setting. , [11.241.001] (FT-14212) For all services supported the control will have 5 levels: -2 to 2%2c where -2 will be the lowest sharpness (least sharp) and 2 will be the highest sharpness (sharpest)., [11.237.002] (FT-14212) The Original Type/Subtype selections that will be available for all scan services (Scan to email%2c Network Scan%2c I-FAX) are listed in Table 2., [19.260.004] (FT-14212) CCSFEAT334 Four mutually exclusive Input Image Portrait/Landscape Orientation (IIPLO) options shall be available from which the user may make a single selection: Portrait%2c Landscape%2c Auto: Head to Top and Auto: Head to Feed-edge. , [19.260.006] (FT-14212) CCSFEAT336 If the user specifies the IIPLO as “Landscape” all input images in that job-segment shall be considered to be intrinsically landscape in nature%2c and the “up” direction of each input image in that job-segment shall be determined using each original’s Input Paper Feed Orientation (SEF or LEF) and presuming that the original is placed in one of the approved physical orientations%2c such that the “up” direction is towards the longer edge that is in the feed direction or away from the user. , [19.044.001] (FT-14212) CCSFEAT1055 It shall be possible to set the amount to be erased from each edge (top%2c bottom%2c left & right) independently. , [28.010.001] (FT-14212) CCSFEAT10478 The Build Job enable/disable shall be available to the user for supported services on the Local UI., [28.085.006] (FT-14212) [+NW] The following pairs of sizes in table 1 (except for rows 1 and 2) are valid and displayed:, [44.001.242] (FT-14212) [D1.7-*] The SA shall be able to create a customer defined permission role, [44.001.243] (FT-14212) [D1.7-*] The SA shall be able to view all customer defined permission roles created on the device, [44.001.025] (FT-14212) [D1.7-*] The SA shall be able to modify a customer defined role’s, [44.001.025.1] (FT-14212) [D1.7-*] Role Profile (name and description), [44.001.025.2] (FT-14212) [D1.7-*] Role Permissions, [44.001.025.3] (FT-14212) [D1.7-*] User/Group Mappings, [44.001.229] (FT-14212) [D2.2-*] The SA shall be able to create a role for only the individually selected Local User or Groups. , [44.001.029] (FT-14212) [D1.7-*] The SA shall be able to associate an existing local user to an existing role. , [44.001.048] (FT-14212) [D2.2-*] If LDAP is selected as the Authorization method%2c then the SA shall be required to configure the connection to an LDAP server before creating or editing a role., [46.050.073] (FT-14212) CCSFEAT17393 [+D2.2] The supported Blank Page Management settings are the following:, [46.050.075] (FT-14212) CCSFEAT17411 [+D2.2] The supported TIFF Rotation Method settings are the following: OUTPUT: All the input settings should be configurable and the scan to home job should complete successfully. Validate that all the configured parameters are reflecting in the output, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , PROCESS: PRIORITY: 1 TEST_TYPE: manual LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: advanced TEST_CASE_TYPE: regression TESTCASE_SOURCE: SPEC: SPEC_VERSION: ATM_OWNER: blank APPROVE_QE: blank APPROVED_QE: APPROVE_SE: blank APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_APPROVALS: CDATE: 1457664466 MDATE: 1457664466, 1462182239, 1472890926 MUSER: w4939RDM, geethapriyaks, Srinivasan.M AUTHOR: w4939RDM ATM_MCOMMENTS: Imported from spreadsheet, ., Removed the Requirements tested. HISTORY: ATM_LOCKED: ATM_REQLINK: B7CCE780-70C1-1014-86AD-A1A4FE9D5A9B, B7EFDA24-70C1-1014-BACD-C94FB02944F7, B98CAF08-70C1-1014-A54E-C87B2228BA39, A99B9656-6E71-1014-93C8-97E245C02EC1, A99EDC98-6E71-1014-974B-D03B96C9C003, A9C97516-6E71-1014-8FF3-E5AD8A928663, 9B7B76C1-7E85-1014-8CF7-8B68DD2F1CE0, B1C4BF5B-850E-1014-82EC-FA69492ADD4A, EA01BE6E-6E18-1014-AB24-851D5D90F66B, EA0466A9-6E18-1014-903A-EF852E30F816, EA06E60A-6E18-1014-83E9-D9E14A1CEB41, EA10B739-6E18-1014-AEFB-B8251C518206, 4143F78B-6EB0-1014-9478-BE9FE645644F, 4146A2F1-6EB0-1014-B208-8BB5A2E93480, 41932766-6EB0-1014-8BFC-B5D0591256B9, 296AC6D3-6E6C-1014-8F6E-E7E1106E3F83, A031B4B9-6FC8-1014-BD6C-DE6C3C3BE627, A036FFCC-6FC8-1014-A322-DF5AE32B1B05, F61428B1-6E5F-1014-8BD9-CE4771117B74, 8D02C2CD-7675-1014-9785-8BE85C1C4074, 3AC9DB1F-875E-1014-AA94-F80C3A033B1C, 4DF716A6-8B97-1014-ACDD-B3A1B4EBD6E8, 4DFA6EF4-8B97-1014-9012-E2D27E8BFAAC, 4DFCBC40-8B97-1014-A216-8707DA04524C, 4E24D143-8B97-1014-A538-9DE3659119CC, 4E2A316C-8B97-1014-9258-B62BBE7C0E14, 4E2D0035-8B97-1014-BC20-82BDEEC657F9, 4E2F8F1A-8B97-1014-81C2-9A1080746B80, 4E351C6F-8B97-1014-90AB-81DD326A4D65, 61E7F74C-6FAF-1014-B083-D8863455867D, 61F04CFC-6FAF-1014-9E8A-F036BDFA1E63, 61F6610B-6FAF-1014-A3E3-AE1773E66902, 624CCA0E-6FAF-1014-8222-9C26B5F3D8BA, 629B1B19-6FAF-1014-B886-E88490BBA6C9, 62A0CFBB-6FAF-1014-AE2D-F183DDA21456, 62AD0A80-6FAF-1014-95B6-F04B89349BFB, 62B2251B-6FAF-1014-B139-A00579ECC9CD, 62B4E30E-6FAF-1014-819F-D23AD7A7AC68, 62BC5334-6FAF-1014-887E-E16A76A0C041, 62C6FB16-6FAF-1014-AE68-BF7DA38DAAA6, 62CC8482-6FAF-1014-8458-BBF0255E4A1B ATM_REQCOUNT: 41 QA_TEAM: TC_WEIGHTAGE: 1 FILENAME: FILEDESC: FILES: SPEC_TAG: