ATM_ID: 6835486E-6FA7-1014-B576-898A1E2048F3 MFF: PLANNEDTIMESTAFF: ID: DPQA_Workflow_v2/Scan_to_file/50067 TESTCASE_HEADLINE: [Use Case-Case 6] GROUP: FEATURE: SUB_FEATURE: INPUT: The device under test should be loaded with latest software. All the possile parameters should be configured using the assigned interface (CWIS,LUI or SNMP) PROCEDURE: [Common Settings-Wired-LDAP-LDAP-JBA-IPv6] [Template Configuration-Predefined Template] [Filing Protocol-Scan to File-HTTP] [Filing Policy-Append Existing File] [Filing Address-IPV6] [XSM Enablement-Disabled] [Job Log(.XST)-Disabled] [Confirmation Sheet-Disabled] [Login Credentials-Authenticated User and Domain] [File Format-TIFF 1 file per page] [OutputColor-GrayScale] [2 Sided Scanning-1 Sided] [Lighten/Darken-0] [Sharpness-3] [Contrast-Auto Contrast] [Background Suppression-Auto Suppression] [Resolution-100] [File SizeQuality--1] [Remove Blank Pages-OFF] [Scan to Original Type-Photo] [How Original was produced-Solid Ink Original] [Original Orientation-Landscape Originals] [Edge Erase-Left] [Build Job-ON] [Original Size input-Preset Scan Area - 8.5x11" (LEF)] [Rotation Method-Use Device] [Mode of Input-Platern] , [44.049.073.4] (FT-14212) Authentication Domain Query -> Directory Server Field Mappings -> User Authentication Domain, [44.049.073.2] (FT-14212) Properties ->Security ->Access Rights->Setup-> Edit Authentication Servers (Authentication Method must be set to Remotely on Network) -> Authentication Type, [44.049.073] (FT-14212) CCSFEAT4267 All the following authentication settings shall be made available for cloning: , [44.049.069.3] (FT-14212) CCSFEAT4265.3 If the LDAP before Authentication method has been enabled on the device%2c then%2c when a user submits his credentials%2c prior to making the call to the authentication server%2c the device shall make an LDAP query to the configured Primary LDAP server. This query shall take the user’s login name and query against the Login Name field (generally sAMAccountName for ADS%2c cn for other LDAP servers) to find the contents of the field configured on the Web Page to hold the user’s login domain (generally distinguishedName or dn)., [44.049.067.1.1] (FT-14212) CCSFEAT4265.1.1 Whether or not the LDAP before Authentication method has been enabled on the device. The default is Disabled. , [44.049.067.1] (FT-14212) CCSFEAT4265.1 The Systems Administrator shall be allowed to set%2c via the Web UI or via SNMP: , [44.049.060] (FT-14212) CCSFEAT10560 If no server is selected%2c then the default LDAP server shall be used., [44.049.054.5.6] (FT-14212) CCSFEAT4259.5.6 LDAP Authentication., [44.049.054.5] (FT-14212) CCSFEAT4259.5 If Network is selected%2c define what Network Authentication Type will be used for Local User Interface Authentication either: , [44.049.029.3] (FT-14212) CCSFEAT4248.3 Following an authentication failure due to user input%2c all authentication data except for the user password shall be presented to the user via the Device UI for correction and re-initiation of the authentication process., [44.049.029.2.3] (FT-14212) CCSFEAT4248.2.3 allowed to re-initiate the authentication process., [44.049.029.2.2] (FT-14212) CCSFEAT4248.2.2 given the opportunity to re-enter the authentication information , [44.049.029.2.1] (FT-14212) CCSFEAT4248.2.1 the user shall be notified via the Device UI that the user data was incorrect , [44.049.029.2] (FT-14212) CCSFEAT4248.2 If the validation fails due to one or more incorrect or unrecognized pieces of user entered authentication data%2c , [44.049.029.1] (FT-14212) CCSFEAT4248.1 If the System cannot communicate with the remote authentication server%2c then the user shall be notified via the Device UI that there is a problem and that the SA should be contacted. , [44.049.029] (FT-14212) CCSFEAT4248 For Kerberos%2c SMB%2c NDS%2c and LDAP Authentication attempts (failures and retries) the following requirements apply: , [44.049.021] (FT-14212) CCSFEAT4241 The password shall be echoed back to the user in the form of one asterisk (*) for each character entered., [44.049.020] (FT-14212) CCSFEAT10708 Both User Name and Password shall be allowed to contain up to 63 characters within the printable Unicode character set. , [44.049.018.3] (FT-14212) CCSFEAT4239.3 User Password (Null is NOT allowed) , [44.049.018.1] (FT-14212) CCSFEAT4239.1 User Name , [44.049.018] (FT-14212) CCSFEAT4239 Within the LDAP Authentication Environment%2c the user shall be required to supply the following information via the Local UI: , [44.049.001.5] (FT-14212) CCSFEAT4225.5 Network via LDAP (See the LDAP Administration FS), [44.049.001] (FT-14212) CCSFEAT4225 The system shall support the following Authentication Types:, Event Id:-63%2c94%2c144%2c1456%2c29%2c30%2c42 CCSFEAT21254 The audit log entry data shall report events contained in table 1 below: , CCSFEAT14934 At the request of the SA via the Local UI the audit log shall be loaded onto USB drive media inserted into device. , CCSFEAT14932 At the request of the SA the audit log shall be downloaded to the SA client PC via the webUI, CCSFEAT8890.28 System job identifier and System Job Type, CCSFEAT8890.8 Job’s Type , CCSFEAT8890.2 Job Owner , [18.050.015.19] CCSFEAT8890.16 Number of pages scanned for the job , CCSFEAT8890.12 Job’s number of copies completed (number of sets) , CCSFEAT8881 A System Device will communicate with the External Accounting System via its network connection, CCSFEAT8878 End users will be provided with a method of accessing and using the Job-based Accounting data from a client application that performs accounting tasks with data gathered from the System Device (or devices). , CCSFEAT13845 [D2.2-*] When JBA is enabled%2c all JBA supported job types shall be tracked as records in the JBA job log regardless of prompting enablement. , CCSFEAT9347 The device shall support Job Based Accounting API version 4.0.5., [46.200.198.1] (FT-14212) CCSFEAT8495.1 ‘on’ - confirmation sheet shall be printed for each scan to file job. , [46.200.200.2] (FT-14212) NONE: A Confirmation Sheet shall not be printed ., [46.200.218.2] (FT-14212) User Credentials (Username and Domain) , [44.001.048] (FT-14212) [D2.2-*] If LDAP is selected as the Authorization method%2c then the SA shall be required to configure the connection to an LDAP server before creating or editing a role., [44.001.029] (FT-14212) [D1.7-*] The SA shall be able to associate an existing local user to an existing role. , [44.001.229] (FT-14212) [D2.2-*] The SA shall be able to create a role for only the individually selected Local User or Groups. , [44.001.025.3] (FT-14212) [D1.7-*] User/Group Mappings, [44.001.025.2] (FT-14212) [D1.7-*] Role Permissions, [44.001.025.1] (FT-14212) [D1.7-*] Role Profile (name and description), [44.001.025] (FT-14212) [D1.7-*] The SA shall be able to modify a customer defined role’s, [44.001.243] (FT-14212) [D1.7-*] The SA shall be able to view all customer defined permission roles created on the device Modify Role , [44.001.242] (FT-14212) [D1.7-*] The SA shall be able to create a customer defined permission role, [46.050.036] (FT-14212) CCSFEAT17341 supported Input Media Size values are the following: Please note some sizes may only be supported though the ADF or only from the Platen -- this list of presets for Scan to X (Mail%2c file etc) may not be equal to those available for Copy)7. [-No] NA_8.5x11LEF, [46.050.060] (FT-14212) CCSFEAT17365 The supported Original SubType attribute values are the following: 1. PRINTED ORIGINAL: Optimized for halftoned prints or high quality print of digital photos. 2. PHOTOCOPIED ORIGINAL: Best selection for halftoned copies or high quality copies of digital photos. 3. PHOTOGRAPH: Best selection when original contains real photograph. 4. INKJET ORIGINAL: Inkjet print or copy. 5. SOLID INK ORIGINAL: Solid ink print or copy , [46.050.028] (FT-14212) CCSFEAT17335 The supported Input Edge Erase values are the following: 1. NONE 2. TOP: 0-50mm or 0-2in 3. LEFT: 0-50mm or 0-2in 4. BOTTOM: 0-50mm or 0-2in 5. RIGHT: 0-50mm or 0-2in , [46.050.004] (FT-14212) CCSFEAT17316 Table 1 Auto Background Suppression Defaults and supported User interfaces, [46.050.057] (FT-14212) CCSFEAT17362 The supported Input Orientation values are the following: 1. Portrait. 2. Landscape 3. Head to Top 4. Head to Feed Edge, [46.050.007] (FT-14212) CCSFEAT17319 The user shall be allowed to set the Darkness value between three steps below nominal (0) and three steps above nominal (0) in increments of one step where steps below nominal represent a lighter image and steps above nominal represent a darker image. , [46.050.072] (FT-14212) CCSFEAT17392 The supported Sides To Scan values are the following: 1. ONE_SIDED: The scan service shall only scan one side of each page of the input document . 2. TWO_SIDED: The scan service shall scan both sides of each page of the input document. 3. SECOND_SIDE_ROTATION: The scan service shall scan both sides of each page of the input document and shall apply a 180 degree rotation to the second side image., [46.050.055] (FT-14212) CCSFEAT17360 The system shall automatically rotate output to enable attachments to be aligned for use by OCR packages as well as TIFF and PDF readers., [46.050.061] (FT-14212) CCSFEAT17367 Original Type/SubType* Defaults for Discovery Solid Ink and Laser Products. , [46.050.015.2] (FT-14212) CCSFEAT17322.2 [D2.2-*] 1 File Per Page: The scan service shall generate a single file for each scanned image., [46.050.015.1] (FT-14212) CCSFEAT17322.1 [D2.2-*] Multi-Page: The scan service shall generate a single file that contains all the scanned images , [46.050.015] (FT-14212) CCSFEAT17322 The supported File Format – File Options values are the following: , [46.050.008.1] (FT-14212) CCSFEAT17320.1 [*-D2.2] Single-page TIFF: Utilized for Full Color%2c Grayscale or Black/White; extension .TIF (Scan to File also supports the .XSM%2c .DAT and .XST control files). , [28.080.016.2] (FT-14212) CCSFEAT3491.2 [-No%2c -Ma%2c -Bg%2c -Ba] 8.5x11 LEF, [28.010.001] (FT-14212) CCSFEAT10478 The Build Job enable/disable shall be available to the user for supported services on the Local UI., [19.044.001] (FT-14212) CCSFEAT1055 It shall be possible to set the amount to be erased from each edge (top%2c bottom%2c left & right) independently. , [19.260.006] (FT-14212) CCSFEAT336 If the user specifies the IIPLO as “Landscape” all input images in that job-segment shall be considered to be intrinsically landscape in nature%2c and the “up” direction of each input image in that job-segment shall be determined using each original’s Input Paper Feed Orientation (SEF or LEF) and presuming that the original is placed in one of the approved physical orientations%2c such that the “up” direction is towards the longer edge that is in the feed direction or away from the user. , [19.260.004] (FT-14212) CCSFEAT334 Four mutually exclusive Input Image Portrait/Landscape Orientation (IIPLO) options shall be available from which the user may make a single selection: Portrait%2c Landscape%2c Auto: Head to Top and Auto: Head to Feed-edge. , [11.237.002] (FT-14212) The Original Type/Subtype selections that will be available for all scan services (Scan to email%2c Network Scan%2c I-FAX) are listed in Table 2., [11.241.001] (FT-14212) For all services supported the control will have 5 levels: -2 to 2%2c where -2 will be the lowest sharpness (least sharp) and 2 will be the highest sharpness (sharpest). , [11.235.001] (FT-14212) The control shall have 7 levels: -3%2c -2%2c -1%2c 0%2c 1%2c 2%2c 3 where -3 will be the darkest and 3 will be the lightest setting. , [25.000.016] (FT-14212) The factory default selection for sides imaged is “1→1”. , [25.000.002.1] (FT-14212) Simplex scanning; , [46.200.028.4] (FT-14212) HTTP OUTPUT: All the input settings should be configurable and the scan to file job should complete successfully. Validate that all the configured parameters are reflecting in the output, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , PROCESS: PRIORITY: TEST_TYPE: LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: TEST_CASE_TYPE: TESTCASE_SOURCE: SPEC: SPEC_VERSION: ATM_OWNER: APPROVE_QE: APPROVED_QE: APPROVE_SE: APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_APPROVALS: CDATE: 1457602013 MDATE: 1457602013 MUSER: w4939RDM AUTHOR: w4939RDM ATM_MCOMMENTS: Imported from spreadsheet HISTORY: ATM_LOCKED: ATM_REQLINK: 5796821F-6EAB-1014-B187-905B303E59DD, 57A0B8A9-6EAB-1014-8D8D-9A575AE8CFF7, 5818E060-6EAB-1014-8FA6-D34735E7E2B1, 581B2677-6EAB-1014-B9EF-C7741A81D940, 58200075-6EAB-1014-9B3F-A2F84981BAA1, 5824695C-6EAB-1014-BBEE-CE73B3197347, 58442652-6EAB-1014-AAF3-A67FCD7DA790, 58498726-6EAB-1014-91DF-AE016B21ABD7, 584C37F6-6EAB-1014-BABF-BF215999CC7D, 584EE9C2-6EAB-1014-AB64-C33D31537856, 58513DAA-6EAB-1014-8B14-D939424CDA36, 5853A0BA-6EAB-1014-BCDB-BEEAB6C68852, 58F9FAC6-6EAB-1014-B9A6-C4B1E51DF27C, 5905F128-6EAB-1014-9E9A-8F351B68E97A, 59645FE6-6EAB-1014-ACFD-A3C08106DFA1, 598C5364-6EAB-1014-B150-DE01EAD638E3, 598F2311-6EAB-1014-943E-88659450EA83, 59A721D7-6EAB-1014-8387-F32E6DF029A8, 59C0535B-6EAB-1014-80A7-811CB0A37F69, 59C6073A-6EAB-1014-8FD2-E9514E0F9B43, 59CFE878-6EAB-1014-9C20-DAD4A205498D, FEEFE135-6E38-1014-8A5B-DD3C8094895D, FEF5FD57-6E38-1014-BA0D-CFA0EE686F60, E50D056B-6E6F-1014-B5F8-A4645CB2B43E, E5101395-6E6F-1014-8917-C6375387D3B3, E51312D4-6E6F-1014-B013-93E165E85025, E51BA0FC-6E6F-1014-A9BB-8EE47872C546, E578642F-6E6F-1014-98DE-DEC80164155A, E5B82CA3-6E6F-1014-8102-C9F931B8DB10, E5DEE9C3-6E6F-1014-81BF-ED83C2696191, E5FC68E6-6E6F-1014-B6C6-9AC853AC3799, E662108B-6E6F-1014-9061-E4CA4C774DD3, A99B9656-6E71-1014-93C8-97E245C02EC1, A99EDC98-6E71-1014-974B-D03B96C9C003, A9C97516-6E71-1014-8FF3-E5AD8A928663, 9B7B76C1-7E85-1014-8CF7-8B68DD2F1CE0, B1C4BF5B-850E-1014-82EC-FA69492ADD4A, EA01BE6E-6E18-1014-AB24-851D5D90F66B, EA0466A9-6E18-1014-903A-EF852E30F816, EA06E60A-6E18-1014-83E9-D9E14A1CEB41, EA10B739-6E18-1014-AEFB-B8251C518206, 4143F78B-6EB0-1014-9478-BE9FE645644F, 4146A2F1-6EB0-1014-B208-8BB5A2E93480, 41932766-6EB0-1014-8BFC-B5D0591256B9, 296AC6D3-6E6C-1014-8F6E-E7E1106E3F83, A031B4B9-6FC8-1014-BD6C-DE6C3C3BE627, A036FFCC-6FC8-1014-A322-DF5AE32B1B05, 446631C8-70B7-1014-A741-BC37E7F15FA7, F6599B03-6E5F-1014-98E2-F2014E65519D, 8D02C2CD-7675-1014-9785-8BE85C1C4074, 8A1EF5F2-875D-1014-BF6D-9799230F1287, 61F6610B-6FAF-1014-A3E3-AE1773E66902, 61FBEDB4-6FAF-1014-BE71-95A4BEC2DFA1, 621C761E-6FAF-1014-8929-F3860F773CA7, 622021A6-6FAF-1014-AD1D-8554520EDAC6, 6222A69F-6FAF-1014-95C5-9B5774E5BCE1, 6246A499-6FAF-1014-918B-FA32642BF927, 625FD4F0-6FAF-1014-B357-B16040FE3B92, 6292D502-6FAF-1014-8B46-AD8A0FC10508, 62986991-6FAF-1014-93FF-C2F65F004418, 62A0CFBB-6FAF-1014-AE2D-F183DDA21456, 62A364D1-6FAF-1014-9E4F-99CE91F80132, 62C4710D-6FAF-1014-AD69-9671E07D0C1C, 191CCD1D-70EF-1014-89F3-EB360F5A700F, 1C926D67-70EF-1014-BCF5-E5DFBE577037, 1CA3B72E-70EF-1014-8B1E-8EEF0C3B1248, 1CDF771F-70EF-1014-9B53-DBC26D2A56CB ATM_REQCOUNT: 67 QA_TEAM: TC_WEIGHTAGE: FILENAME: FILEDESC: FILES: