ATM_ID: 1E6344F6-6DE2-11E7-9D39-119BD30A4651 MFF: PLANNEDTIMESTAFF: ID: DPQA_Workflow_v3/Fax/100161 TESTCASE_HEADLINE: Case 1 GROUP: FEATURE: SUB_FEATURE: INPUT:

Entry Screen default-Set "Default Walkup Screen" and "Default Screen when Originals are Detected" as "Fax"

PROCEDURE:

[Common Layer-1 Settings-Wired-LDAP-LDAP (Non-Logged-in Users- Restrict Access to Everything; Logged-In Users - Assign Groups (LDAP) and set allowed only for Fax Service%2c Device app and Jobs app) -JBA-IPV6]
[Entry Screen Defaults-Set "Default Walkup Screen" as "Fax" and "Default Screen when Originals are Detected" as "Fax"]
[Fax Line-Fax-Configured with Single line Fax]
[Incoming Fax Options-Enabled]
[Recipient Type-Manual]
[Create / Edit Contact from Touch Screen-NA]
[Confirmation Report-Print Confirmation]
[Cover Sheet-OFF]
[2-Sided Scanning-2-Sided%2c Rotate Side 2]
[Original Type-Photo and Text]
[Resolution-Super Fine (600)]
[Original Size-Preset Scan Area - A3 (SEF)]
[Book Faxing-OFF]
[Send Header Text-ON]
[Build Job-OFF]
[Mode of Input-DADH]
[Reduce/Fit-Reduce to Fit]
[Delay Fax-ON]
[Additional Check for Resolution-]
[Additional Check for Line-Check that For a single line fax or a dual line fax with only one line set-up%2c the WebUI shall display fax settings for one set-up phone line only.]
[Additional Check for Incoming Fax Options-]
[Additional Check for Fax Lines-1. Check that the Fax Line 1 and Fax Line 2 (if applicable) entries for Fax Line Phone Number and Fax Line ID shall conform to FD 30.10 Fax Install requirements.

  1. Validate that Selecting the 'Apply' button shall save all settings immediately. ]
    [Additional check for Country selection-1. Validate that Selecting 'Country Selection' shall display a drop-down menu of available countries to choose from.
  2. Validate that Selection of a specific country shall apply to Fax Line 1 and Fax Line 2 (if applicable).
  3. Validate that MIB Supports Read/Write for Fax Country Code(1.3.6.1.4.1.253.8.74.6.2.1.7.11.101.743.1)%2c Fax Line 1 (Line 2 if applicable) Number (Line 1 num OID: 1.3.6.1.4.1.253.8.74.6.2.1.9.11.101.744.1%2c Line 2 num OID: 1.3.6.1.4.1.253.8.74.6.2.1.9.11.101.744.2)%2c Fax Line 1 (Line 2 if applicable) Name (Line 1 name OID: 1.3.6.1.4.1.253.8.74.6.2.1.9.11.101.745.1%2c Line 2 name OID: 1.3.6.1.4.1.253.8.74.6.2.1.9.11.101.745.2)%2c Fax Line 1 (Line 2 if applicable) Options and Fax Receive Header (Line 1 Options: 1.3.6.1.4.1.253.8.74.6.2.1.7.11.101.746.1%2c Line 2 Options: 1.3.6.1.4.1.253.8.74.6.2.1.7.11.101.746.2%2c Fax Receive Header: 1.3.6.1.4.1.253.8.74.6.2.1.7.11.101.747.1).]
    [Common Checks-]
    [Additional Checks for Recipient list-1. Check that Touching ‘Dialling Characters…’ opens the Dialling Characters Window.
  4. Check that The Basic Faxing Window is the top level fax screen for the user and is shown in figure 1 (Leander) Figure 1a shows the Stirling onwards walkup screen.]
    [Additional check for Build job-]
    [Additional Check for Audit Log-], FAXREQ2 The Fax System shall support scanning modes , FAXREQ2.2 The Fax System shall support job scanning mode , BSREQ10918 The Basic Faxing Window is the top level fax screen for the user and is shown in figure 1 (Leander) Figure 1a shows the Stirling onwards walkup screen. Its contents and behaviors are found in FD 30.20. , BSREQ10913 Touching ‘Dialling Characters…’ opens the Dialling Characters Window as detailed in FD 30.21 , [50.008.003] (FT-14212) [D2.3 - *] For a single line fax or a dual line fax with only one line set-up%2c the WebUI shall display fax settings for one set-up phone line only. , [50.008.008] (FT-14212) CCSFEAT15228 [D2.3 - *] Fax Line 1 and Fax Line 2 (if applicable) entries for Fax Line Phone Number and Fax Line ID shall conform to FD 30.10 Fax Install requirements., [50.008.009] (FT-14212) CCSFEAT15229 [D2.3 - *] Selecting the 'Apply' button shall save all settings immediately., [50.008.011] (FT-14212) CCSFEAT15231 [D2.3 - *] Selecting 'Country Selection' shall display a drop-down menu of available countries to choose from., [50.008.012] (FT-14212) CCSFEAT15232 [D2.3 - *] Selection of a specific country shall apply to Fax Line 1 and Fax Line 2 (if applicable)., [50.008.018] (FT-14212) [D2.3 - *] MIB Support for the following:
  5. Fax Country Code - R/W
  6. Fax Line 1 (Line 2 if applicable) Number - R/W
  7. Fax Line 1 (Line 2 if applicable) Name - R/W
  8. Fax Line 1 (Line 2 if applicable) Options - R/W
  9. Fax Receive Header - R/W
OUTPUT:

 All the job attributes modified should be reflected in the received Fax job and the job should be completed without any errors. All the additional checks should pass., , , , , , , , , ,

PROCESS: PRIORITY: TEST_TYPE: LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: TEST_CASE_TYPE: TESTCASE_SOURCE: SPEC: SPEC_VERSION: SPEC_TAG: ATM_OWNER: APPROVE_QE: APPROVED_QE: APPROVE_SE: APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_APPROVALS: CDATE: 1500620359 MDATE: 1500620359 MUSER: W4XHW30J AUTHOR: W4XHW30J ATM_MCOMMENTS: Imported from spreadsheet HISTORY: ATM_LOCKED: ATM_REQLINK: ACA03B20-6E93-1014-909D-E81C96381538, ACA3978F-6E93-1014-B268-F2D3DB37AEE0, 756B9867-8525-1014-90D4-8581C48AEED5, 7574E4E9-8525-1014-A037-C1833D49C5FF, 3D7F76F2-6EA8-1014-AD54-BFC447C1CFC8, 3D8F9F36-6EA8-1014-908C-DC253C945CA7, 3D91D413-6EA8-1014-9AD0-B4B777308F76, 3D96A9EF-6EA8-1014-BCA5-CE2396A4A51B, 3D990607-6EA8-1014-ABEC-BF0B6A796FDC, 3DA7BD87-6EA8-1014-BBD0-8A68AF13CD2D ATM_REQCOUNT: 10 QA_TEAM: TC_WEIGHTAGE: FILENAME: FILEDESC: FILES: