ATM_ID: 37AEDA40-8096-1014-916D-B61857619FB6 MFF: PLANNEDTIMESTAFF: 1 ID: DPQA_Workflow_v3/Scan_To/87394 TESTCASE_HEADLINE: Case 17 GROUP: scan FEATURE: copy_auditron SUB_FEATURE: INPUT:

The device under test should be loaded with latest software.
All the possile parameters should be configured using the assigned interface (CWIS,LUI or SNMP)

PROCEDURE:

[Entry Screen Defaults: Set Entry Screen default - "Default Walkup Screen" and "Default Screen when Originals are Detected" as "Scan To"]
[Common Settings: Wireless-Smart Card (Omnikey 3021)-Local (Make sure that the user is created with UPN i.e. smart@smart.com for authorization) (Non-Logged-in user state - Restrict access to everything; Logged in Users-Select Individual Users and Presets as"Allow access to all Print & Scan apps ")-XSA-IPV4]
[Template Configuration: Scan To Service]
[FIPS: ON]
[Filing Protocol: Scan To-SMB - Always file with Kerberos Ticket]
[Filing Policy: Overwrite Existing File]
[Filing Address: IPV4]
[XSM Enablement: Enabled]
[Job Log(.XST): Enabled]
[Confirmation Sheet: Enabled]
[Login Credentials: Always File with Kerberos Ticket]
[File Format: PDF/A Multi Page Image only]
[OutputColor: Auto Detect]
[2 Sided Scanning: 2 Sided]
[Lighten/Darken: 0]
[Sharpness: 0]
[Contrast: Manual Contrast -2]
[Background Suppression: Auto Suppression]
[Resolution: 200]
[File SizeQuality: 1]
[Remove Blank Pages: ON]
[Scan to Original Type: Photo]
[How Original was produced: Solid Ink Original]
[Original Orientation: Sideway Images]
[Edge Erase: Bottom]
[Build Job: OFF]
[Original Size input: Preset Scan Area - A4 (LEF)]
[Rotation Method: Not Applicable]
[Mode of Input: Platern]
[Additional Checks: NA]
[Scan Coherency: NA]
[Smart Card: 1) Check that When the Card Reader is plugged into the USB port of the system AND Smartcard support is enabled%2c a pop-up window shall appear on the LUI indicating that the device detected the card reader.
2) Check that If the system properly configured the device to use the card reader%2c then the pop-up shall indicate that the reader is ready to be used.
3) Check that The pop-up window shall have a Close button that will remove the window from the LUI.
4) Check that Once the card reader has been properly configured%2c if the reader is removed from the USB Port AND Smartcard support is enabled%2c then a pop-up shall appear on the LUI indicating that the card reader has been unplugged.]
[Authorization: NA]
[Convenience Authentication: NA]
[Queuing: NA]
[Searchable file formats: NA]
[Authentication: NA]
[FIPS: NA]

, [25.000.002] (FT-14212) The System shall support the following three ORIGINAL → SCANNED OUTPUT sides imaged selections: , [25.000.002.2] (FT-14212) Duplex scanning, [46.200.200.1] (FT-14212) PRINT: A Confirmation Sheet shall be printed ., [46.200.188] (FT-14212) [D2.2-*] The SA shall have the ability to enable/disable XSM Subdirectory setting for each system file respository via the WebUI , [19.260.004] (FT-14212) CCSFEAT334 Four mutually exclusive Input Image Portrait/Landscape Orientation (IIPLO) options shall be available from which the user may make a single selection: Portrait%2c Landscape%2c Auto: Head to Top and Auto: Head to Feed-edge. , [46.200.142.5] (FT-14212) OVERWRITE: Overwrites existing files with new documents ., [19.044.001] (FT-14212) It shall be possible to set the amount to be erased from each edge (top%2c bottom%2c left & right) independently. , [28.010.001] (FT-14212) CCSFEAT10478 The Build Job enable/disable shall be available to the user for supported services on the Local UI. , 46.200.053] (FT-14212) If the setting is Always file with Kerberos ticket%2c the device will only attempt to use Kerberos authentication to the SMB share, [46.200.028.3] (FT-14212) SMB via NetBIOS over TCP/IP , [28.080.016.11] (FT-14212) [-No%2c -Ma%2c -Bg%2c -Ba] A4 LEF , CCSFEAT6181 The SA shall be provided with a method for setting up XSA accounts and assigning limits., CCSFEAT6183 User ID%2c General Account and Group Account setup and modification method shall be provided via the Web UI, CCSFEAT11440 [D1.8.2 – D1.9] For each system function the XSA Administrator shall be allowed to select one of the following states for XSA via the Web UI, CCSFEAT15731 [D2.2-*] Device IPv4 field shall allow a minimum of 1.1.1.1 and a maximum of 255.255.255.255, CCSFEAT14932 At the request of the SA the audit log shall be downloaded to the SA client PC via the webUI, CCSFEAT14932 At the request of the SA the audit log shall be downloaded to the SA client PC via the webUI, Event Id:-105%2c94%2c110%2c111%2c144%2c145%2c66%2c6%2c30%2c31 CCSFEAT21254 The audit log entry data shall report events contained in table 1 below: , CCSFEAT3680 The SA shall have the ability via WebUI to Enable/Disable the audit log. , [44.001.229] (FT-14212) [D2.2-*] The SA shall be able to create a role for only the individually selected Local User or Groups. , [44.001.029] (FT-14212) [D1.7-*] The SA shall be able to associate an existing local user to an existing role. , [44.001.242] (FT-14212) [D1.7-*] The SA shall be able to create a customer defined permission role, [44.001.243] (FT-14212) [D1.7-*] The SA shall be able to view all customer defined permission roles created on the device, [44.001.025] (FT-14212) [D1.7-*] The SA shall be able to modify a customer defined role’s, [44.001.025.1] (FT-14212) [D1.7-*] Role Profile (name and description), [44.001.025.2] (FT-14212) [D1.7-*] Role Permissions, [44.001.025.3] (FT-14212) [D1.7-*] User/Group Mappings, [44.100.001] (FT-14502) CCSFEAT17435 [D2.3-*] Custom Authentication shall be enabled via Feature Installation Key., [44.100.003] (FT-14502) CCSFEAT17138 [D2.3-*] [+N%2c +R] The system shall allow only one custom authentication workflow to be enabled at a time., [44.100.004] (FT-14502) CCSFEAT17139 [D2.3-*] [+N%2c +R] The custom authentication method shall not be a visible/selectable authentication method until it has been explicitly enabled by the System Administrator., [44.101.001] (FT-14212) CCSFEAT17140 [D2.2-* ] [+N%2c +R] The follow configuration setting shall be supported for Custom Authentication for Cisco and Microsoft., [44.101.002] (FT-14212) CCSFEAT17141 [D2.2-*] [+N%2c +R] The Xerox device shall use the custom authentication setup username and password to authenticate itself to the Cisco / Microsoft Web Server before it is allowed to use the web service., [44.101.003] (FT-14212) CCSFEAT17142 [D2.2-*] [+N%2c +R] The Xerox device shall display the custom authentication blocking screen when custom authentication is enabled and the operator attempts to access a locked pathway%2c service%2c or feature., [44.101.004] (FT-14212) CCSFEAT17143 [D2.2-*] [+N%2c +R] After the operator has swiped a card over the connected USB card reader the Xerox device shall display a message (i.e. “please wait…”) indicating that authentication is taking place., [44.101.005] (FT-14212) CCSFEAT17144 [D2.2-*] [+N%2c +R] If user authentication is successful then operator shall be given access to authorized pathways%2c services%2c and/or features., [44.101.006] (FT-14212) CCSFEAT17145 [D2.2-*] [+N%2c +R] User authentication shall be successful only if all the following conditions are TRUE:, [44.101.006.1] (FT-14212) The employee badge number exists on the Cisco / Microsoft Employee Badge Server ., [44.101.006.2] (FT-14212) The Badge Status associated with the employee badge number is set to “Active”, [44.101.006.3] (FT-14212) The CardholderStatusValidity associated with the employee badge number is set to “Valid”, [44.101.006.4] (FT-14212) The CardholderTypeValidity associated with the employee badge number is set to “Valid” , [46.050.014] (FT-14212) CCSFEAT17321 File Format and File Options , [46.050.067] (FT-14212) CCSFEAT17387 The supported Pixel Depth values are the following:, [46.050.007] (FT-14212) CCSFEAT17319 The user shall be allowed to set the Darkness value between three steps below nominal (0) and three steps above nominal (0) in increments of one step where steps below nominal represent a lighter image and steps above nominal represent a darker image. , [46.050.070] (FT-14212) CCSFEAT17390 The user shall be allowed to set the Sharpness value between two steps below nominal (0) and two steps above nominal (0) in increments of one step where steps below nominal represent a softer image and steps above nominal represent a sharper image. , [46.050.006] (FT-14212) CCSFEAT17318 The user shall be allowed to select either auto-contrast adjustment or manually set the Contrast value between two steps below nominal (0) and two steps above nominal (0) in increments of one step where steps below nominal represent less Contrast and steps above nominal represent more Contrast. , [46.050.003] (FT-14212) CCSFEAT17315 The supported Auto Background Suppression values are the following:, [46.050.062] (FT-14212) CCSFEAT17366 [-Ll] If Original Type is set to Newspaper/Magazine then Auto Background Suppression shall be ON as default. , [46.050.068] (FT-14212) CCSFEAT17388 The supported Resolution values are the following:, [46.050.005] (FT-14212) CCSFEAT17317 The supported Quality/File Size values are a 3-step range with an integer range of 0-255 and the following incremented steps:255%2c 128%2c 0 , [46.050.073] (FT-14212) CCSFEAT17393 [+D2.2] The supported Blank Page Management settings are the following:
• Removal All Blank Pages – The scan services shall attempt to detect and remove any blank images
• Include All Blank Pages – The scan service shall not remove any blank im
, [46.050.058] (FT-14212) CCSFEAT17363 The supported Original Type attribute values are the following:, [46.050.060] (FT-14212) CCSFEAT17365 The supported Original SubType attribute values are the following:, [46.050.057] (FT-14212) CCSFEAT17362 The supported Input Orientation values are the following:, [46.050.032] (FT-14212) CCSFEAT17338 If Edge to Edge Scanning is enabled and the user sets an Input Edge Erase value%2c the Edge to Edge Scanning shall be disabled. , [46.050.030] (FT-14212) CCSFEAT17336 If an input document is 2 Sided%2c Edge Erase values set for Side 1 of the document shall be ‘mirrored’ over the x-axis for Side 2 as follows:
• Side 2 TOP = Side 1 TOP
• Side 2 BOTTOM = Side 1 BOTTOM
• Side 2 LEFT = Side 1 RIGHT
• Side 2 RIGHT = Side 1 LEFT.
, [46.050.028] (FT-14212) CCSFEAT17335 The supported Input Edge Erase values are the following:, [46.050.035] (FT-14212) CCSFEAT17340 When the Input Media Size value is set to MIXED%2c the scan service shall determine the media size of each page of the input document individually, [46.050.075] (FT-14212) CCSFEAT17411 [+D2.2] The supported TIFF Rotation Method settings are the following:, [46.050.037] (FT-14212) CCSFEAT17342 A remote interface (Web%2c MIB) user shall be allowed to manually define an Input Size Manual where the minimum fast scan dimension is the smaller of the device specific Platen and DADH minimum fast scan directions., [44.060.005] (FT-14212) CCSFEAT4677 [D1.3-*] When the Card Reader is plugged into the USB port of the system AND Smartcard support is enabled%2c a pop-up window shall appear on the LUI indicating that the device detected the card reader. , [44.060.006] (FT-14212) CCSFEAT4616 [D1.3-*] If the system properly configured the device to use the card reader%2c then the pop-up shall indicate that the reader is ready to be used. , [44.060.008] (FT-14212) CCSFEAT4618 [D1.3-*] The pop-up window shall have a Close button that will remove the window from the LUI. , [44.060.009] (FT-14212) CCSFEAT8561 [D1.3-*] Once the card reader has been properly configured%2c if the reader is removed from the USB Port AND Smartcard support is enabled%2c then a pop-up shall appear on the LUI indicating that the card reader has been unplugged.

OUTPUT:

The Scan job is completed successfully reflecting the settings made., , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

PROCESS: PRIORITY: 1 TEST_TYPE: manual LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: intermediate TEST_CASE_TYPE: regression TESTCASE_SOURCE: feature_spec SPEC: SPEC_VERSION: SPEC_TAG: ATM_OWNER: USWU53401 APPROVE_QE: w4ZWSPM7 APPROVED_QE: APPROVE_SE: w4ZWSPM7 APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_APPROVALS: CDATE: 1493384110 MDATE: 1493384110, 1537521548 MUSER: W4XHW30J, USWU53401 AUTHOR: W4XHW30J ATM_MCOMMENTS: Imported from spreadsheet, Updated the common layer as per DAR-161974. HISTORY: ATM_LOCKED: ATM_REQLINK: F60EF7D5-6E5F-1014-B064-BD62948A4605, F61428B1-6E5F-1014-8BD9-CE4771117B74, 1CA16316-70EF-1014-A93B-BD8CC4783FCE, 1C55A317-70EF-1014-8335-A581FB63881C, A031B4B9-6FC8-1014-BD6C-DE6C3C3BE627, 1BA00745-70EF-1014-9A2E-D5B21071E422, 296AC6D3-6E6C-1014-8F6E-E7E1106E3F83, 8D02C2CD-7675-1014-9785-8BE85C1C4074, 198B0B6A-70EF-1014-B602-A6E1DA8DC61B, 191A36D9-70EF-1014-8F6C-A8A3BE8EB60D, 8A374064-875D-1014-9C6A-A1B931AA8B06, B7CCE780-70C1-1014-86AD-A1A4FE9D5A9B, B7EFDA24-70C1-1014-BACD-C94FB02944F7, B80C0F0A-70C1-1014-9B6B-D15C146794B4, B9FDA1C4-70C1-1014-8F07-D593FEEB23BE, 4143F78B-6EB0-1014-9478-BE9FE645644F, 4146A2F1-6EB0-1014-B208-8BB5A2E93480, 41932766-6EB0-1014-8BFC-B5D0591256B9, 422D7A95-6EB0-1014-BDF9-DF596076C22F, EA10B739-6E18-1014-AEFB-B8251C518206, A9C97516-6E71-1014-8FF3-E5AD8A928663, EA01BE6E-6E18-1014-AB24-851D5D90F66B, B1C4BF5B-850E-1014-82EC-FA69492ADD4A, EA0466A9-6E18-1014-903A-EF852E30F816, A99B9656-6E71-1014-93C8-97E245C02EC1, A99EDC98-6E71-1014-974B-D03B96C9C003, EA06E60A-6E18-1014-83E9-D9E14A1CEB41, 75FFA7C1-6E72-1014-AFCC-CD7D1C09CDB5, 76052767-6E72-1014-A68B-9E83FD7A9195, 760BC813-6E72-1014-AED2-BFF53A8007E8, 6D8DA6C6-6E73-1014-A420-95F974F9D97C, 6DB2D2CB-6E73-1014-AEFF-91D46C14AA1C, 6DBBBA0E-6E73-1014-9B27-849817164EDD, 6DBE5620-6E73-1014-B9B4-A68670528AF5, 6DC10002-6E73-1014-8CEE-F6F8FC1E1FC0, 6DC39855-6E73-1014-BECF-BE119B37B30D, 6DC67492-6E73-1014-BDEE-D831A2FDDF61, 6DC9161C-6E73-1014-BBF8-CC20B067BDAC, 6DCB9F1D-6E73-1014-A293-D95393918124, 6DCE8D85-6E73-1014-93CB-B4E25C13FC5F, 62199469-6FAF-1014-8999-B08C1E9E961C, 62B2251B-6FAF-1014-B139-A00579ECC9CD, 61F6610B-6FAF-1014-A3E3-AE1773E66902, 62BC5334-6FAF-1014-887E-E16A76A0C041, 61F34B4B-6FAF-1014-9A87-B1E186865421, 61E7F74C-6FAF-1014-B083-D8863455867D, 62A5BABB-6FAF-1014-8477-DF7F588561BE, 62B4E30E-6FAF-1014-819F-D23AD7A7AC68, 61F04CFC-6FAF-1014-9E8A-F036BDFA1E63, 62C6FB16-6FAF-1014-AE68-BF7DA38DAAA6, 629B1B19-6FAF-1014-B886-E88490BBA6C9, 62A0CFBB-6FAF-1014-AE2D-F183DDA21456, 62986991-6FAF-1014-93FF-C2F65F004418, 62530F4D-6FAF-1014-93EF-E29AC38EDAC5, 624CCA0E-6FAF-1014-8222-9C26B5F3D8BA, 6246A499-6FAF-1014-918B-FA32642BF927, 625D3C0E-6FAF-1014-A84B-B3EEE6A52FC0, 62CC8482-6FAF-1014-8458-BBF0255E4A1B, 62625103-6FAF-1014-8348-F8C42D62A944, A1558B79-6FAB-1014-A0D8-B468BD92E37F, D6420D6C-6EAC-1014-9673-EAC21695B5D1, D6471532-6EAC-1014-8A44-D78D5517D5B0, A158488E-6FAB-1014-9AB1-B6D4A04B6E7F ATM_REQCOUNT: 63 QA_TEAM: TC_WEIGHTAGE: 5 FILENAME: FILEDESC: FILES: