ATM_ID: 0C074146-5702-11E7-9078-740DD30A4651 MFF: PLANNEDTIMESTAFF: ID: DPQA_Workflow_v3/Scan_to_Email/94756 TESTCASE_HEADLINE: Case 69 GROUP: FEATURE: SUB_FEATURE: INPUT:

Set Entry Screen default - "Default Walkup Screen" and "Default Screen when Originals are Detected" as "Email"

PROCEDURE:

[Common Layer 1 Settings-Wired-Custom -Cisco (Elatec TWN3 HID Prox Reader and Prox Card) -LDAP (Restrict access to everything-Non-Logged-in User & Allow only the Email service for logged-in user groups)-JBA-IPV4]
[Microsoft Exchange Server and Microsoft Outlook-2010 and Outlook 2010]
[Client OS-Windows 10]
[Browsers-Microsoft Edge Browser v21.x]
[SMTP Configuration-Hostname]
[SMTP Authentication-for device email jobs- Logged-in User]
[POP3-Not Configured]
[Acknowledgement Report-Not Applicable]
[Activity Report-Not Applicable]
[Accept Email with no attachment -Not Applicable]
[Accept Attachments-Not Applicable]
[Finishing-Stapling-Not Applicable]
[Finishing-2-Sided Printing-Not Applicable]
[allow device to send MDN-Not Applicable]
[Print cover sheet with incoming Email messages-Not Applicable]
[Connection Encryption-STARTTLS]
[From Field-Always use default From address - No]
[Personalization-OFF]
[Allow logged-in users to edit the From field -Address Book (LDAP) Search Failure]
[User Login State in LUI-Authenticated User E-Mail Address Available]
[Edit From field when authentication is not required -Yes]
[Use sender's name -Disabled]
[Confirmation sheet-ERRORS ONLY]
[Auto Add me-Disabled]
[Send to Self-Disabled]
[Receipient Type-Network Address Book]
[Encryption-Editable by user (check Encryption editable(enabled/disabled) in LUI after logging in)]
[Signing-Not Applicable]
[Domain Filtering-Block Domains]
[Comments-Domain filtering-Try sending job with the domain which is not in block domain list]
[Allow LDAP Email Address without the @ Requirement-Disabled]
[Clear "To:"%2c "Cc:"%2c and "Bcc:" fields-Disabled/OFF]
[Restrict manual entry of recipients-OFF]
[Password Protection (Encrypted)-Not Applicable]
[Rotation Method-Not Applicable]
[File size management-Automatic boundary (msg size%2c fragments%2c job size)]
[Blank Page Management-ON]
[OSND-OFF]
[FIPS-OFF]
[FIPS-Checks-NA]
[Output Color-Color]
[2-Sided Scanning-2 sided Rotate]
[Original Type-Map]
[How Original was Produced-Not Applicable]
[Lighten / Darken --2]
[Sharpness-2]
[Saturation-0]
[Contrast-Auto Contrast]
[Suppression-Grayed out or disabled]
[Resolution-300]
[Quality / File Size-Low compression]
[Original Orientation-Landscape Originals]
[Original Size-Custom Size]
[Edge Erase-All Sides]
[File Format-PDF/A Multi Page Image only]
[Build Job-OFF]
[Mode of Input-Platern (Check for SR message and proceed with DADH)]
[Additional Checks-1. Validate that With encryption selected%2c but there are no valid encryption certificates available the job cannot be encrypted. Also validate that The user shall be told%2c on the LUI%2c that the job cannot be encrypted. The user shall be given the option to cancel the job.

  1. Validate that Information on the error/confirmation sheet has the following fields: The name of the host-scanning device%2c The SMTP Server Machine Login Name%2c The SMTP Server IP Address and Port Number or The SMTP Server Host Name and Port Number%2c
    If the Email Server IP Address and the Email Server Host Name are both configured%2c the Email Server Host Name shall take precedence%2c The date the job was started%2c
    The time the job was started%2c The name(s) of the image file(s) attached%2c The size(s) of the image file(s) attached%2c The Subject%2c The From Email Address%2c The Reply To Email Address%2c Each receiver email address set for the job%2c The number of pages scanned and The Filing Status of the job shall be included on the error/confirmation sheet. (e.g. filing error; filing complete%2c etc.).
  2. Validate that Changing the Email Subject from CWIS updates the Attachment Name in LUI. (Attachment name should be same as subject).]
    [Queuing-NA]
    [Start/Stop-NA]
    [Clear All-NA]
    [Service display order-NA]
    [Entry Screen Defaults-NA]
    [XSA-NA]
    [JBA-NA]
    [Job Limit-NA]
    [Internationalization-NA]
    [Cloning-NA]
    [System Timeout-NA]
    [Backup and Restore-NA]
    [Build Job-check-NA]
    [Confirmation Reports-NA]
    [Address Book-NA]
    [User Information Database-NA]
    [Personalization-Checks-NA]
    [Authentication-Checks-1. Additionally Validate that After a CSE enters a diagnostic mode%2c any card reader that is connected to the device shall become inactive and shall not be able to affect the CSE session.
  3. Validate that As a result of the card reader becoming inactive upon enter a diagnostic mode the following shall be prevented: connecting or disconnecting the card reader shall not result in any LUI messages and inserting%2c removing%2c scanning%2c or swiping a card shall not logout the CSE%2c or attempt to login the card user.]
    [Smart Card-NA]
    [Custom Blocking screen-NA]
    [Searchable File Format-NA]
    [Audit Log-NA]
    [Remote UI-NA]
    [IPV6-NA]
    [LDAP-NA]
    [Connectivity-NA]
    [Configuration Report-NA], [46.201.129] (FT-14212) CCSFEAT20174 [D2.2-*] The system shall support the capability of E-Mail encryption when a valid encryption certificate is accessible to the device, [46.201.129.2] (FT-14212) CCSFEAT20174.2 The system shall support the use of LDAP Directory services for the encryption certificate access. , [46.201.132] (FT-14212) CCSFEAT20175 When email encryption is set to 'Editable by User' via the WebUI%2c the user can always enable or disable encryption at the LUI. , [46.201.148] (FT-14212) CCSFEAT13566 With encryption selected%2c but there are no valid encryption certificates available the job cannot be encrypted. , [46.201.148.1] (FT-14212) CCSFEAT13566.1 The user shall be told%2c on the LUI%2c that the job cannot be encrypted. , [46.201.148.4] (FT-14212) CCSFEAT13566.4 The user shall be given the option to cancel the job. , [46.201.204] (FT-14212) CCSFEAT12519 The SA shall be allowed to set the confirmation enablement option via the Web User Interface to be one of:, [46.201.204.3] (FT-14212) CCSFEAT12519.3 Errors Only, [46.201.230] (FT-14212) CCSFEAT12531 The SA shall be allowed to configure a set of controls via the Web User Interface that shall define whether or not the From: Address field is editable as well as provide an initial value if desired by the SA . , [46.201.238] (FT-14212) CCSFEAT12541 The SA shall be able to configure the email domain filter feature via the webUI, [46.201.240] (FT-14212) CCSFEAT12543 The state of the feature will be able to be set to off (default)%2c allow%2c or block domains. , [46.201.278] (FT-14212) CCSFEAT12576 The LDAP E-mail Filtering feature shall be configured by the device system administrator. , [46.201.288] (FT-14212) CCSFEAT12584 Information on the error/confirmation sheet., [21.103.014] (FT-17272) [D3.5-*] The SA shall be able to set the default walkup screen to be one of the following:, [21.103.014.1] (FT-17272) [D3.5-*] An native application (e.g. Copy%2c Email%2c etc.)%2c EIP%2c or Weblet, [22.103.126] (FT-14505) The Xerox MFD shall support Microsoft Exchange Server 2010. , [22.103.129] (FT-14505) The Xerox MFD shall support Microsoft Outlook 2010. , [22.103.136] (FT-19214) [D3.6-*] The Xerox MFD shall support the Microsoft Edge browser version 21.x and higher, [22.103.137] (FT-19214) [D3.6 - *] The Xerox MFD shall support all Microsoft Edge browser versions released in the last 3 years starting from v21., [22.103.124] (FT-14505) The Xerox MFD shall support Windows 10 (32 and 64 bit)%2c This includes Enterprise%2c Pro%2c Home and Education editions., [44.027.005] (FT-14212) If a user has an email encryption certificate stored in his LDAP profile%2c the device shall retrieve the certificate with the other personalization data such that it can be made available for use for that logged in user ., [44.027.006] (FT-14212) The email certificate that is retrieved via the personalization process shall be subject to the same validation rules as defined in the Scan to Email specification. , [44.050.011] (FT-15543) [D2.6-*] After a CSE enters a diagnostic mode%2c any card reader that is connected to the device shall become inactive and shall not be able to affect the CSE session. , [44.050.011.1] (FT-15543) As a result of the card reader becoming inactive upon enter a diagnostic mode the following shall be prevented:, [44.050.011.1.1] (FT-15543) connecting or disconnecting the card reader shall not result in any LUI messages, [44.050.011.1.2] (FT-15543) inserting%2c removing%2c scanning%2c or swiping a card shall not logout the CSE%2c or attempt to login the card user, [25.000.002] (FT-14212) CCSFEAT312 The System shall support the following three ORIGINAL → SCANNED OUTPUT sides imaged selections: , [25.000.002.3] (FT-14212) CCSFEAT312.3 Duplex scanning with second side image rotated; , [11.237.002] (FT-14212) The Original Type/Subtype selections that will be available for all scan services (Scan to email%2c Network Scan%2c I-FAX) are listed in Table 2. , [11.235.001] (FT-14212) CCSFEAT691 The control shall have 7 levels: -3%2c -2%2c -1%2c 0%2c 1%2c 2%2c 3 where -3 will be the darkest and 3 will be the lightest setting. , [11.241.001] (FT-14212) CCSFEAT3525 For all services supported the control will have 5 levels: -2 to 2%2c where -2 will be the lowest sharpness (least sharp) and 2 will be the highest sharpness (sharpest). , [19.260.004] (FT-14212) CCSFEAT334 Four mutually exclusive Input Image Portrait/Landscape Orientation (IIPLO) options shall be available from which the user may make a single selection: Portrait%2c Landscape%2c Auto: Head to Top and Auto: Head to Feed-edge., [19.260.006] (FT-14212) CCSFEAT336 If the user specifies the IIPLO as “Landscape” all input images in that job-segment shall be considered to be intrinsically landscape in nature%2c and the “up” direction of each input image in that job-segment shall be determined using each original’s Input Paper Feed Orientation (SEF or LEF) and presuming that the original is placed in one of the approved physical orientations%2c such that the “up” direction is towards the longer edge that is in the feed direction or away from the user. , [28.080.001] (FT-14212) CCSFEAT1216 When manually selecting the Original Size Input the user must enter dimensions for both the document process direction dimension (slow-scan dimension) and document inboard-outboard dimension (fast-scan dimension). , [19.044.002] (FT-14212) CCSFEAT3494 It shall be possible to set the amount to be erased from all edges (top%2c bottom%2c left & right) simultaneously. , [28.010.001] (FT-14212) The Build Job enable/disable shall be available to the user for supported services on the Local UI. , [28.010.060] (FT-14212) The default Build Job value is Off and may be set as the default by the SAKO, [44.001.229] (FT-14212) [D2.2-*] The SA shall be able to create a role for only the individually selected Local User or Groups., [44.001.025] (FT-14212) [D1.7-*] The SA shall be able to modify a customer defined role’s, [44.001.025.2] (FT-14212) [D1.7-*] Role Permissions, [44.001.025.3] (FT-14212) [D1.7-*] User/Group Mappings, [46.050.003] (FT-14212) The supported Auto Background Suppression values are the following:
    • OFF: The scan service shall turn off the auto background suppression feature.
    • ON: The user selection of ON enables the auto background suppression feature., [46.050.005] (FT-14212) The supported Quality/File Size values are a 3-step range with an integer range of 0-255 and the following incremented steps:255%2c 128%2c 0 , 46.050.006] (FT-14212) The user shall be allowed to select either auto-contrast adjustment or manually set the Contrast value between two steps below nominal (0) and two steps above nominal (0) in increments of one step where steps below nominal represent less Contrast and steps above nominal represent more Contrast. , [46.050.007] (FT-14212) The user shall be allowed to set the Darkness value between three steps below nominal (0) and three steps above nominal (0) in increments of one step where steps below nominal represent a lighter image and steps above nominal represent a darker image. , [46.050.015.1] (FT-14212) [D2.2-*] Multi-Page: The scan service shall generate a single file that contains all the scanned images , [46.050.017] (FT-14212) CCSFEAT17324 [D1.3 - *] The filename extension case setting is applicable to the following file types: TIFF%2c PDF%2c JPEG and XPS. , [46.050.030] (FT-14212) If an input document is 2 Sided%2c Edge Erase values set for Side 1 of the document shall be ‘mirrored’ over the x-axis for Side 2 as follows:
    •Side 2 TOP = Side 1 TOP•Side 2 BOTTOM = Side 1 BOTTOM•Side 2 LEFT = Side 1 RIGHT•Side 2 RIGHT = Side 1 LEFT. , [46.050.036] (FT-14212) supported Input Media Size values are the following: Please note some sizes may only be supported though the ADF or only from the Platen -- this list of presets for Scan to X (Mail%2c file etc) may not be equal to those available for Copy), [46.050.057] (FT-14212) The supported Input Orientation values are the following:Portrait.Landscape Head to Top Head to Feed Edge , [46.050.058] (FT-14212) The supported Original Type attribute values are the following:
    \ PHOTO: Image processing is optimized for images.
    \ TEXT: Best selection for text documents composed of fine line characters or other high contrast documents with bright%2c dense colors.
    MIXED (PHOTO AND TEXT): Image path optimized for providing an acceptable image quality for both images and text.
    NEWSPAPER/MAGAZINE: Best selection for newspapers and magazines
     MAP: Best selection for maps, [46.050.060] (FT-14212) The supported Original SubType attribute values are the following:
    PRINTED ORIGINAL: Optimized for halftoned prints or high quality print of digital photos.
    PHOTOCOPIED ORIGINAL: Best selection for halftoned copies or high quality copies of digital photos.
    \ PHOTOGRAPH: Best selection when original contains real photograph.
    INKJET ORIGINAL: Inkjet print or copy.
    SOLID INK ORIGINAL: Solid ink print or copy , [46.050.065] (FT-14212) The supported Output Color values are the following on devices enabled for color scanning:
    1Full Color: Scanned image data is output in 24bit color%2c 8 bits per component.
    \ Grayscale: Scanned image data is output in 8bpp grayscale.
    Black/White: Output will be binary regardless of original color.
    Auto Color Detect: The output is based on the detection of color on the document. If there is no color%2c the output will generally be Grayscale., [46.050.068] (FT-14212) The supported Resolution values are the following: 72 100 150 200 300 400 600., [46.050.069] (FT-14212) [-Sr] When output color is set to be any type of color job (i.e. NOT Black & White or Grayscale)%2c the user shall be allowed to set the Saturation value between two steps below nominal (0) and two steps above nominal (0) in increments of one step where steps below nominal represent a less saturated image and steps above nominal represent a more saturated image. , [46.050.070] (FT-14212) The user shall be allowed to set the Sharpness value between two steps below nominal (0) and two steps above nominal (0) in increments of one step where steps below nominal represent a softer image and steps above nominal represent a sharper image. , [46.050.072] (FT-14212) The supported Sides To Scan values are the following:
    \ ONE_SIDED: The scan service shall only scan one side of each page of the input document .
    \ TWO_SIDED: The scan service shall scan both sides of each page of the input document.
    \ SECOND_SIDE_ROTATION: The scan service shall scan both sides of each page of the input document and shall apply a 180 degree rotation to the second side image., [46.050.073] (FT-14212) [+D2.2] The supported Blank Page Management settings are the following:
    Removal All Blank Pages – The scan services shall attempt to detect and remove any blank images
    Include All Blank Pages – The scan service shall not remove any blank images , [44.100.001] (FT-14502) CCSFEAT17435 [D2.3-*] Custom Authentication shall be enabled via Feature Installation Key., [44.100.003] (FT-14502) CCSFEAT17138 [D2.3-*] [+N%2c +R] The system shall allow only one custom authentication workflow to be enabled at a time., [44.100.004] (FT-14502) CCSFEAT17139 [D2.3-*] [+N%2c +R] The custom authentication method shall not be a visible/selectable authentication method until it has been explicitly enabled by the System Administrator., [44.101.001] (FT-14212) CCSFEAT17140 [D2.2-* ] [+N%2c +R] The follow configuration setting shall be supported for Custom Authentication for Cisco and Microsoft., [44.101.002] (FT-14212) CCSFEAT17141 [D2.2-*] [+N%2c +R] The Xerox device shall use the custom authentication setup username and password to authenticate itself to the Cisco / Microsoft Web Server before it is allowed to use the web service., [44.101.003] (FT-14212) CCSFEAT17142 [D2.2-*] [+N%2c +R] The Xerox device shall display the custom authentication blocking screen when custom authentication is enabled and the operator attempts to access a locked pathway%2c service%2c or feature., [44.101.004] (FT-14212) CCSFEAT17143 [D2.2-*] [+N%2c +R] After the operator has swiped a card over the connected USB card reader the Xerox device shall display a message (i.e. “please wait…”) indicating that authentication is taking place., [44.101.005] (FT-14212) CCSFEAT17144 [D2.2-*] [+N%2c +R] If user authentication is successful then operator shall be given access to authorized pathways%2c services%2c and/or features., [44.101.006] (FT-14212) CCSFEAT17145 [D2.2-*] [+N%2c +R] User authentication shall be successful only if all the following conditions are TRUE:, [44.101.006.1] (FT-14212) The employee badge number exists on the Cisco / Microsoft Employee Badge Server ., [44.101.006.2] (FT-14212) The Badge Status associated with the employee badge number is set to “Active”, [44.101.006.3] (FT-14212) The CardholderStatusValidity associated with the employee badge number is set to “Valid”, [44.101.006.4] (FT-14212) The CardholderTypeValidity associated with the employee badge number is set to “Valid” , [55.085.046] (FT-14212) CCSFEAT12791 [D2.2 - *] If the connection encryption setting is set to SMTPS(SSL/TLS)%2c the device shall support the establishment of a secure channel prior to performing any SMTP specific communication. , [55.085.046.1] (FT-14212) CCSFEAT12791.1 If the SMTP server does not support SMTPS(SSL/TLS)%2c the device shall terminate the SMTP connection and the associated E-mail job shall be deleted/terminated, [55.085.044] (FT-14212) CCSFEAT12789 [D2.2 - *] If the connection encryption setting is set to “STARTTLS (if available)”%2c the device shall support the STARTTLS capability as specified in RFC 3207 with the following key behaviors, [55.085.044.1.1] (FT-14212) CCSFEAT12789.1.1 If the response contains the STARTTLS directive then device shall support a STARTTLS connection to the server, [55.085.044.1.2] (FT-14212) CCSFEAT12789.1.2 If the response does not contain the STARTTLS directive then the device shall NOT use STARTTLS when communicating with the SMTP server, [55.085.045] (FT-14212) CCSFEAT12790 [D2.2 - *] If the connection encryption setting is set to “STARTTLS”%2c the device shall support the STARTTLS capability as specified in RFC 3207 with the following key behaviors, [55.085.045.1.1] (FT-14212) CCSFEAT12790.1.1 If the response contains the STARTTLS directive then device shall support a STARTTLS connection to the server, [55.085.045.1.2] (FT-14212) CCSFEAT12790.1.2 If the response does not contain the STARTTLS directive then the device shall terminate the SMTP connection and the associated E-mail job shall be deleted/terminated, [46.201.231] (FT-14212) [CQGbl00471268] [D2.4-*] The device shall provide an SA settable option to “Always use Default From Address” via the WebUI and SNMP. , [44.027.006] (FT-14212) CCSFEAT16526 The email certificate that is retrieved via the personalization process shall be subject to the same validation rules as defined in the Scan to Email specification. , [46.201.039] (FT-14212) If the Reply To: address is not Null%2c editing the From: Email Address shall not change the value of the Reply To: address. , [46.201.292] (FT-16583%2cFT-16244) [D2.6-*]%2c[R14-11-*] When the Friendly Name (Sender Name) setting is enabled%2c the Reply To: field shall be populated with both the Sender Friendly Name and From: Address, [46.201.118.3] (FT-14212) If the SA setting is "Errors Only": A sheet shall be generated if there is an unsuccessful transfer of the email job to the SMTP Server. , [46.201.212] (FT-14212) The Default value for Auto Send to Self shall be disabled. , [46.201.215] (FT-14212) “Only Send to Self” shall automatically disable “Manual Add Me”. , [46.201.213] (FT-14212) When the Auto Send to Self option is enabled a copy of the From: e-mail%2c if manually entered by the user%2c or their Authenticated User E-Mail Address shall be automatically added to the Address List ("To:"). , [46.201.111] (FT-14212) In addition to adding recipients manually or through an Address Book%2c the user shall be allowed to add the defined Sender as a To: entry into the recipient list without being required to access an address book or manually re-enter the name. , [46.201.249] (FT-14212) The Allow domains setting will cause the device to check the domain of a destination iFax or email address against the domain list and only allow the destinations when there is an exact match to a domain in the list. , [46.201.281] (FT-14212) With LDAP E-mail Address Filtering "On" returned LDAP searches shall contain items without the @ requirement. , [46.201.088] (FT-14212) If the Scan to Email total job size (Headers%2c Message body and Attachments) exceeds the total job size limit set by the SA /KO%2c the job shall be deleted and an Error Sheet shall be printed. , [46.201.186] (FT-14212) [D1.9.2 ] Encryption certificates downloaded from an LDAP server will be verified for minimum public key length requirements. Certificates not meeting the minimum will be rejected with notification of the user. This requirement is independent of the FIPS enablement selection. , [46.201.092.3] (FT-14212) Single-page file format files (single page TIFF and JFIF) shall be split such that the total size of the resulting Email (all attachments included) does not exceed the Maximum Message Size limit. , [55.085.044.1.1] (FT-14212) CCSFEAT12789.1.1 If the response contains the STARTTLS directive then device shall support a STARTTLS connection to the server. , [55.085.047] (FT-14212) CCSFEAT12792 [D2.2 - *] If FIPS mode is enabled on the device%2c then all STARTTLS and SMTPS(SSL/TLS) encryption algorithms shall be FIPS approved/certified. , [46.201.290] (FT-14212) [D2.2-*] When email signing is set to 'Editable by User' via the WebUI%2c the user can always enable or disable email signing at the LUI. , [46.201.128] (FT-14212) [D2.2-*] If the signing certificate cannot be obtained or is invalid%2c the user shall be told that the email cannot be signed and shall be given the option to send the email unsigned%2c when email signing is set to ‘Editable by User’ via the WebUI., 46.201.118.2] (FT-14212) If the SA setting is "Off": a sheet shall not be generated regardless of the transfer status. , [46.201.250] (FT-14212) The Block domains setting will cause the device to check the domain of a destination iFax or email address against the domain list and only block destinations when there is an exact match to a domain in the domain list. , [46.201.096] (FT-14212) If the estimated number of splits (job fragments) exceeds the limit set by the SA %2c then the job shall be deleted and an Error Sheet shall be printed, [46.201.299.3] (FT-14210) [[R15-08%2c D3.5-*] -*] A conflict will be indicated if the user attempts to select a different password setting after the first attachment with password protection has been applied and completed, [46.201.299.2] (FT-14210) [[R15-08%2c D3.5-*] -*] Once password protection settings have been applied to an attachment it can no longer be turned off or changed for any subsequent attachments., [46.201.299.1] (FT-14210) [[R15-08%2c D3.5-*] -*] Once password protection settings have been applied to any attachment the encrypted password shall be applied to all attachments., [46.201.299] (FT-14210) [[R15-08%2c D3.5-*] -*] PDF password protection will be selectable., CCSFEAT9347 The device shall support Job Based Accounting API version 4.0.5., CCSFEAT13845 [D2.2-*] When JBA is enabled%2c all JBA supported job types shall be tracked as records in the JBA job log regardless of prompting enablement. , CCSFEAT8881 A System Device will communicate with the External Accounting System via its network connection, CCSFEAT8918 The accounting IDs of the logged on user will be applied to Scanning Confirmation Sheets for E-Mail and Internet Fax jobs. If such information is not available or if prompting is disabled for Scans%2c they will be tracked against the Generic IDs, CCSFEAT8888.5 Scan to E-mail  , CCSFEAT8890.2 Job Owner , CCSFEAT8890.8 Job’s Type , CCSFEAT8889 JBA service will be performed only for those job types that are supported by the configuration, CCSFEAT8890.7 Job’s Finishing (if any, CCSFEAT8890.28 System job identifier and System Job Type, CCSFEAT8890.21 E-Mail Recipients , CCSFEAT8890.21.1 The device supports a maximum character length of 253 characters to identify an E-Mail Recipient , CCSFEAT8893 The error sheet will contain the following information: , CCSFEAT8893.1 Owner  , CCSFEAT8893.2 Date and time  , CCSFEAT8893.3 Document  , CCSFEAT14932 At the request of the SA the audit log shall be downloaded to the SA client PC via the webUI, CCSFEAT14934 At the request of the SA via the Local UI the audit log shall be loaded onto USB drive media inserted into device. , CCSFEAT14933 The SA shall be able to save the audit log in a tab delimited file format and be able to import into Excel using the text import wizard provided by Excel (6.0 & later). , CCSFEAT3659 Entry # ( Integer value from 1 to the number of entries in the audit log ) , CCSFEAT3719 Event Date (mm/dd/yyyy) , CCSFEAT3720 Event Time (hh:mm:ss ) , CCSFEAT3722 Entry description : (This value is a brief description of an entry. This description should match the unique entry ID value) For allowed entry descriptions see table 1 “Audit log entries” below. , CCSFEAT3723 Entry Data (String value. This value is any additional data that is logged for an audit log entry. Data elements within the Entry Data should be separated by tab characters where appropriate. The format of each entry type defined in table 1 below.) , Event Id:-105%2c9%2c110%2c111%2c144%2c145%2c6%2c29%2c30%2c42%2c36 CCSFEAT21254 The audit log entry data shall report events contained in table 1 below: , D2.6-* The current Audit Log Web UI page shall include options to transmit the audit log file to a server., CCSFEAT3679 Settings shall be added to the Web UI under Properties/Security/Audit Log  , [46.201.118.3] (FT-14212) If the SA setting is "Errors Only": A sheet shall be generated if there is an unsuccessful transfer of the email job to the SMTP Server. , [46.201.091] (FT-14212) When splitting on an Image Boundary: , [46.201.092.1] (FT-14212) Each attachment contained in a fragment shall be a complete a usable formatted file. (Single-page formatted files may contain more than one attachment per fragment.) , [46.201.092.2] (FT-14212) Multi-page files (PDF and MTIFF) files shall be split such that the total size of the resulting Email (one attachment per email) does not exceed the Maximum Message Size limit. , [46.201.017.1] (FT-14212) If Authentication is used AND the Perform LDAP Query SA Setting is False%2c OR No Authentication is used%2c then Table 3 defines the editability of the From Email Address field%2c the values on the LUI for the From Email Address: , [46.201.018] (FT-14212) Authentication is used AND the Perform LDAP Query LDAP SA Setting is False%2c OR No Authentication is used , [46.201.075] (FT-14212) The default shall be to append the 3-digit numerical extension%2c to match with legacy customers. , [46.201.118] (FT-14212) Based on the SA settings (see the Administration section) sheets can be generated to tell the user whether or not a Scan to Email job was successfully transferred from the device to the SMTP Server. , [46.201.098] (FT-14212) The addresses may be added by either manually typing them in%2c or by selecting them from an address book. , [46.201.112] (FT-14212) If the Sender attribute is NULL%2c it shall not be allowed to be added to the recipient list.
OUTPUT:

All the job attributes modified should be reflected in the received Email job and the job should be completed without any errors. All the additional checks should pass., , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

PROCESS: PRIORITY: TEST_TYPE: LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: TEST_CASE_TYPE: TESTCASE_SOURCE: SPEC: SPEC_VERSION: SPEC_TAG: ATM_OWNER: APPROVE_QE: APPROVED_QE: APPROVE_SE: APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_APPROVALS: CDATE: 1498105196 MDATE: 1498105196 MUSER: q50KV9D1 AUTHOR: q50KV9D1 ATM_MCOMMENTS: Imported from spreadsheet HISTORY: ATM_LOCKED: ATM_REQLINK: D9490FF5-7558-1014-B8B8-ED0CEE3052E9, D94DE5C2-7558-1014-A171-E727849488B7, D955B413-7558-1014-BF6D-E86678531268, D9A4DD9B-7558-1014-B4BF-C813426A9D37, D9A72760-7558-1014-896F-E0A00359F9AE, D9A96D4A-7558-1014-A8F9-B2F08CF2F7FF, DAC0B46B-7558-1014-9927-9D7AFB112B05, DAC7B26B-7558-1014-8025-EAC093A67CD3, DB26FB90-7558-1014-8408-C413B329544C, DB5F0185-7558-1014-8F07-99E6D72C82D8, DB63CE04-7558-1014-998B-CEF541F04704, DBC50B70-7558-1014-A1FB-B9F961D788EE, E45AEEB8-5283-11E7-BC45-028ED30A4651, D451EAE0-6E8E-1014-B436-A3CFD17D2BCF, D4543113-6E8E-1014-ABBD-C735BD1FEA88, B0BDF924-9087-1014-83C3-AC1CAAC5BAFB, B10E062E-9087-1014-9AE9-C307C3EF555C, AD376866-5040-11E7-A0A9-0EBFD40A4651, B0792820-9087-1014-9DBE-FB2BBA119B82, 41925212-6EA1-1014-9465-FB10E5EBC24E, 4194F827-6EA1-1014-8203-E2424968F6CF, 165AC5F3-79E9-1014-9FA2-FE0EB1463A67, 165D7CEB-79E9-1014-B914-DD05414F6177, 166036C1-79E9-1014-9248-877D0B09C22F, 1662DBC1-79E9-1014-A680-9FF1DFA19148, F60EF7D5-6E5F-1014-B064-BD62948A4605, F6169252-6E5F-1014-91A9-8C794DC243AB, A031B4B9-6FC8-1014-BD6C-DE6C3C3BE627, A036FFCC-6FC8-1014-A322-DF5AE32B1B05, 89E6D151-875D-1014-98D5-E86B4430E29E, 296D89B1-6E6C-1014-ADB9-80847633D63C, 8D02C2CD-7675-1014-9785-8BE85C1C4074, 8DC19786-7675-1014-AA13-EF3B4F3A5F1A, EA10B739-6E18-1014-AEFB-B8251C518206, EA0466A9-6E18-1014-903A-EF852E30F816, A99EDC98-6E71-1014-974B-D03B96C9C003, EA06E60A-6E18-1014-83E9-D9E14A1CEB41, 61E7F74C-6FAF-1014-B083-D8863455867D, 61F04CFC-6FAF-1014-9E8A-F036BDFA1E63, 61F34B4B-6FAF-1014-9A87-B1E186865421, 61F6610B-6FAF-1014-A3E3-AE1773E66902, 622021A6-6FAF-1014-AD1D-8554520EDAC6, 62283334-6FAF-1014-A7E3-889AAE5745C6, 624CCA0E-6FAF-1014-8222-9C26B5F3D8BA, 625FD4F0-6FAF-1014-B357-B16040FE3B92, 62986991-6FAF-1014-93FF-C2F65F004418, 629B1B19-6FAF-1014-B886-E88490BBA6C9, 62A0CFBB-6FAF-1014-AE2D-F183DDA21456, 62AD0A80-6FAF-1014-95B6-F04B89349BFB, 62B4E30E-6FAF-1014-819F-D23AD7A7AC68, 62B9764E-6FAF-1014-8738-EFD33294D01C, 62BC5334-6FAF-1014-887E-E16A76A0C041, 62C4710D-6FAF-1014-AD69-9671E07D0C1C, 62C6FB16-6FAF-1014-AE68-BF7DA38DAAA6, 75FFA7C1-6E72-1014-AFCC-CD7D1C09CDB5, 76052767-6E72-1014-A68B-9E83FD7A9195, 760BC813-6E72-1014-AED2-BFF53A8007E8, 6D8DA6C6-6E73-1014-A420-95F974F9D97C, 6DB2D2CB-6E73-1014-AEFF-91D46C14AA1C, 6DBBBA0E-6E73-1014-9B27-849817164EDD, 6DBE5620-6E73-1014-B9B4-A68670528AF5, 6DC10002-6E73-1014-8CEE-F6F8FC1E1FC0, 6DC39855-6E73-1014-BECF-BE119B37B30D, 6DC67492-6E73-1014-BDEE-D831A2FDDF61, 6DC9161C-6E73-1014-BBF8-CC20B067BDAC, 6DCB9F1D-6E73-1014-A293-D95393918124, 6DCE8D85-6E73-1014-93CB-B4E25C13FC5F, 4CA1AF21-81C8-1014-A746-EBB63DCE92FD, 4CA6EA79-81C8-1014-BCBD-AF011046AB58, 4CA944EA-81C8-1014-A546-E52FF4798145, 4CABFF24-81C8-1014-B4EF-A27F653A595A, 4CB0EC6D-81C8-1014-925B-BA72DFE74715, 4CB3A24A-81C8-1014-BAC5-C38029D51846, DB295476-7558-1014-B36F-B51D5BC76A3A, D7B38BDB-7558-1014-A181-E1658E52778B, D7C7EF44-7558-1014-8CAF-DAB8267566AB, D8E12E7E-7558-1014-A6A1-DD448B39DFB6, DAEC1DD6-7558-1014-BFE4-F728DC8550C1, DAF34FF5-7558-1014-9447-F118462E397C, DAEE79FE-7558-1014-B93B-A7F38946304C, D8C7809A-7558-1014-B53B-DA95DECEA3B6, DB7B4735-7558-1014-866E-BED2FC11D3D5, DBD95ED0-7558-1014-9108-B819EB3ED312, D875F257-7558-1014-9E26-9EEF1BA4152A, DA74F4D2-7558-1014-88A6-9958A3BAD6E3, D88584D9-7558-1014-AE72-B9D7EEDD8B7F, D922C3EE-7558-1014-B798-C8B9282047E2, D9252965-7558-1014-9705-B9AA27596F8F, D8DEE63B-7558-1014-8C6F-EDEBB8EABA29, DB7DA22A-7558-1014-AC40-864AC89879BE, D892D9AF-7558-1014-B1E5-A1D8DDA1A6A9, DC1099CB-7558-1014-BB4F-837F4D1596DA, DC0DE562-7558-1014-9E2F-FDEC56C354EC, DC0B5188-7558-1014-88F1-B58DCB38D39F, DC08F079-7558-1014-9BA0-ABA001857F6B, E50D056B-6E6F-1014-B5F8-A4645CB2B43E, E5101395-6E6F-1014-8917-C6375387D3B3, E51BA0FC-6E6F-1014-A9BB-8EE47872C546, E7CB1194-6E6F-1014-AFA6-DECCFE19A12A, E541721D-6E6F-1014-84F6-DD42213F6C58, E578642F-6E6F-1014-98DE-DEC80164155A, E5B82CA3-6E6F-1014-8102-C9F931B8DB10, E55CB93A-6E6F-1014-9C50-9322D1E81562, E5B5CEC0-6E6F-1014-BA8E-F8ECB37B968B, E662108B-6E6F-1014-9061-E4CA4C774DD3, E6264918-6E6F-1014-93AB-A54CF89F932F, E628F5B3-6E6F-1014-B84A-FE0BD0E22A5C, E66C34FD-6E6F-1014-82C4-9610DB3A9BDA, E66E9D2B-6E6F-1014-8E1A-E16E5F6BFCC9, E67131FB-6E6F-1014-9398-83E2C1C4A720, E673B997-6E6F-1014-AE8F-993EC54DF1B4, 4143F78B-6EB0-1014-9478-BE9FE645644F, 4146A2F1-6EB0-1014-B208-8BB5A2E93480, 41498162-6EB0-1014-95B0-C8C0737EFA43, 414ED7AF-6EB0-1014-853A-C0FFF0CB1285, 41519149-6EB0-1014-BB9B-9DD9797F4F05, 41543174-6EB0-1014-8EAB-C1FF4380EF6B, 4158A52B-6EB0-1014-A670-C0BE56855E29, 415B43E2-6EB0-1014-80BB-904763B6B26E, 41932766-6EB0-1014-8BFC-B5D0591256B9, 724133FB-7110-1014-9135-8A9156619FB6, 42267793-6EB0-1014-9329-9F34EF90A179, D87D5F66-7558-1014-A6F5-BA3753EDC0B1, D87FE01F-7558-1014-A085-DFC83A0A458E, D8830FF4-7558-1014-851D-E944468328F4, D74F399F-7558-1014-AA8E-ED6AB0C7C5CE, D7520E00-7558-1014-AC89-D98BE9473EB5, D8344B63-7558-1014-8A2B-AB97BDDE9216, D8DA476A-7558-1014-8D4F-89EE2AD75CAB, D897CF2F-7558-1014-9E90-AA7489AAD287, D8CA2280-7558-1014-B374-C6EC7DFB99A7 ATM_REQCOUNT: 131 QA_TEAM: TC_WEIGHTAGE: FILENAME: FILEDESC: FILES: