PRIORITY: TEST_TYPE: APPROVED_QE: INPUT: The device under test should be loaded with latest software. All the possile parameters should be configured using the assigned interface (CWIS,LUI or SNMP) FILES: TESTCASE_HEADLINE: [Use Case-Case 29] TESTCASE_VERSION: FEATURE: APPROVE_SE: SPEC_VERSION: MFF: TESTCASE_PLATFORM: SPEC: HISTORY: CDATE: 1500010208 TESTCASE_APPROVALS: TESTCASE_STATE: OUTPUT: All the input settings should be configurable and the scan to file job should complete successfully. Validate that all the configured parameters are reflecting in the output, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , FILEDESC: PROCESS: RESOURCE_HW: TC_WEIGHTAGE: MDATE: 1500010208 APPROVED_SPAR: SKILL_SET: TESTCASE_SOURCE: APPROVE_QE: TEST_CASE_TYPE: APPROVED_SE: PLANNEDTIMESTAFF: ATM_OWNER: AUTHOR: W4XHW30J LOE: ASSOCIATED_TESTCASES: ATM_REQLINK: D5D7B096-6EAC-1014-836C-B68CBAA491EA, D5FB1C00-6EAC-1014-AF69-DDEBBA7F80E0, D62904DE-6EAC-1014-931B-CF7044612E95, D62B7A07-6EAC-1014-9AE5-E9B89D9FD662, D62DECBC-6EAC-1014-9B03-C1C11345BFC1, D6420D6C-6EAC-1014-9673-EAC21695B5D1, D644ABC3-6EAC-1014-A4C6-E78DC4B66348, D6471532-6EAC-1014-8A44-D78D5517D5B0, D64BF763-6EAC-1014-8EA1-C92CAB7389F7, D668961A-6EAC-1014-B24E-8CAEAF494647, D66AF1FA-6EAC-1014-A368-F2190CFF0B32, D66D57A4-6EAC-1014-ACCA-800AEE8EEB43, D66FB694-6EAC-1014-8902-B01936A228AC, A1558B79-6FAB-1014-A0D8-B468BD92E37F, A158488E-6FAB-1014-9AB1-B6D4A04B6E7F, E5666E48-6E6F-1014-8E39-A2E2B9075AD7, 41932766-6EB0-1014-8BFC-B5D0591256B9, A031B4B9-6FC8-1014-BD6C-DE6C3C3BE627, F60EF7D5-6E5F-1014-B064-BD62948A4605, F6169252-6E5F-1014-91A9-8C794DC243AB, 8A34676F-875D-1014-B8C0-A57B32A10147, 6246A499-6FAF-1014-918B-FA32642BF927, 62C6FB16-6FAF-1014-AE68-BF7DA38DAAA6, 62CC8482-6FAF-1014-8458-BBF0255E4A1B, 62D45CD0-6FAF-1014-8182-976225CAA5FE, 1921C4B2-70EF-1014-A355-F5E43DB334FB, 1A52A4E7-70EF-1014-A745-C0AC762F7FED, 1BA00745-70EF-1014-9A2E-D5B21071E422, 1BBA6366-70EF-1014-974F-DE4C09E42A48, 1BC82179-70EF-1014-8F3F-87E5DA6FE0A6, 1CA3B72E-70EF-1014-8B1E-8EEF0C3B1248, 1CDD2370-70EF-1014-A1B6-8CC2EFCE9EEA, 1D685CE4-70EF-1014-8D83-CD4D2360FF69 TRAINING: MUSER: W4XHW30J GROUP: SUB_FEATURE: SPEC_TAG: PROCEDURE: [Common Settings-Wired-Smartcard-Local-JBA-IPV4] [Template Configuration-Predefined Template] [Filing Protocol-Scan to File - SFTP] [Filing Policy-Overwrite Existing File] [Filing Address-IPV4] [XSM Enablement-Disabled] [Job Log(.XST)-Disabled] [Confirmation Sheet-Disabled] [Login Credentials-Logged in User] [File Format-TIFF Multi Page] [OutputColor-Color] [2 Sided Scanning-2 sided Rotate] [Lighten/Darken-3] [Sharpness--3] [Contrast-Manual Contrast -2] [Background Suppression-Off] [Resolution-200] [File SizeQuality-0] [Remove Blank Pages-ON] [Scan to Original Type-Map] [How Original was produced-Not Applicable] [Original Orientation-Upright Images] [Edge Erase-Left] [Build Job-ON] [Original Size input-Preset Scan Area - A4 (SEF)] [Rotation Method-Use TIFF Orientation Tag] [Mode of Input-DADH] , [44.060.0010] (FT-14212) [D1.3-*] The device shall be able to differentiate between USB devices%2c and thus will not display the pop-up unless it is for a Card Reader. , [44.060.009] (FT-14212) [D1.3-*] Once the card reader has been properly configured%2c if the reader is removed from the USB Port AND Smartcard support is enabled%2c then a pop-up shall appear on the LUI indicating that the card reader has been unplugged. , [44.060.008] (FT-14212) [D1.3-*] The pop-up window shall have a Close button that will remove the window from the LUI., [44.060.007] (FT-14212) [D1.3-*] If the system could not properly configure the card reader for use than there shall be no pop-up. , [44.060.006] (FT-14212) [D1.3-*] If the system properly configured the device to use the card reader%2c then the pop-up shall indicate that the reader is ready to be used. , [44.060.005] (FT-14212) [D1.3-*] When the Card Reader is plugged into the USB port of the system AND Smartcard support is enabled%2c a pop-up window shall appear on the LUI indicating that the device detected the card reader. , [44.060.004.6] (FT-14212) OmniKey Cardman 3021 USB, [44.060.004] (FT-14212) CCSFEAT4615 [D1.3-*] The device shall support any USB CCID compliant card readers%2c but the following shall be validated: , [44.060.003.1] (FT-14212) .1 [D1.9-D2.2] Gemalto .NET v1, [44.060.003] (FT-14212) [D1.9-*] The following smart cards are not supported and will trigger an unsupported card error message to the walk up user. Other cards may also trigger this message. , [44.060.002] (FT-14212) [D1.9-*] Other cards may be supported in addition to this list. A message will be displayed to the user if an unsupported card type is used. , [44.060.001.11] (FT-14212) .NET, [44.060.001] (FT-14212) CCSFEAT4614 [D1.3-*] The device shall support at least the following smart cards: , [46.200.200.2] (FT-14212) NONE: A Confirmation Sheet shall not be printed ., [46.200.218.1] (FT-14212) User Credentials (Username only) , CCSFEAT21254 The audit log entry data shall report events contained in table 1 below: , [46.050.028] (FT-14212) The supported Input Edge Erase values are the following: 1. NONE 2. TOP: 0-50mm or 0-2in 3. LEFT: 0-50mm or 0-2in 4. BOTTOM: 0-50mm or 0-2in 5. RIGHT: 0-50mm or 0-2in , [46.050.075] (FT-14212) [+D2.2] The supported TIFF Rotation Method settings are the following: • Rotate Scanned Image (disabled) - slower image processing%2c viewer independent • Use TIFF Orientation Tag (enabled) - faster image processing%2c may be viewer dependent , [46.050.073] (FT-14212) [+D2.2] The supported Blank Page Management settings are the following: Removal All Blank Pages – The scan services shall attempt to detect and remove any blank images, [46.050.076] (FT-14212) [+D2.2] If the TIFF Rotation Method is disabled then the TIFF Orientation Tag shall be set to 1; no rotation , [28.080.016.10] (FT-14212) CCSFEAT3491.10 A4 SEF , [19.260.004] (FT-14212) CCSFEAT334 Four mutually exclusive Input Image Portrait/Landscape Orientation (IIPLO) options shall be available from which the user may make a single selection: Portrait%2c Landscape%2c Auto: Head to Top and Auto: Head to Feed-edge. , [11.237.002] (FT-14212) The Original Type/Subtype selections that will be available for all scan services (Scan to email%2c Network Scan%2c I-FAX) are listed in Table 2. , [11.241.001] (FT-14212) For all services supported the control will have 5 levels: -2 to 2%2c where -2 will be the lowest sharpness (least sharp) and 2 will be the highest sharpness (sharpest). , [11.235.001] (FT-14212) The control shall have 7 levels: -3%2c -2%2c -1%2c 0%2c 1%2c 2%2c 3 where -3 will be the darkest and 3 will be the lightest setting. , [25.000.002.3] (FT-14212) Duplex scanning with second side image rotated; , [25.000.002] (FT-14212) The System shall support the following three ORIGINAL → SCANNED OUTPUT sides imaged selections: , CCSFEAT8890.1.2 For the system functions that are configured to have prompting enabled or Job Limits enabled%2c the System Device will make available a submitted job’s User ID to the External Accounting System, [44.060.013.3] (FT-14212) The blocking screen shall supersede any Accounting related screens. , [44.060.013.2] (FT-14212) The blocking screen shall have a navigation button that will return the user to the screen the user was on when he tried to access the Service and/or Feature. , [44.060.013.1] (FT-14212) The blocking screen shall tell the user that he must insert his Smartcard in order to access the Service and/or Feature. , [44.060.013] (FT-14212) [D1.3-*] If the SA configured the device such that Smartcard Authentication is enabled%2c the Services Pathway is not locked%2c and one or more Services and/or Features is Locked%2c and%2c if the user selects one of the locked Services and/or Features%2c then a blocking screen with the following attributes shall appear over the Scanning Service screen: , [46.200.089.1.2] (FT-14212) use the Authenticated User’s Login Name and Password, [46.200.249] (FT-14212) The default value for the Confirmation Sheet Policy shall be Errors Only ., [46.200.028.6] (FT-14212) SFTP , [46.200.157] (FT-14212) Table 13: OVERWRITE: IF FILE DOES NOT ALREADY EXIST (with the same Document Object Name ) , [46.200.152] (FT-14212) Table 8: OVERWRITE: IF FILE ALREADY EXISTS (with the same Document Object Name) , [46.200.142.5] (FT-14212) OVERWRITE: Overwrites existing files with new documents . RESOURCE_CONSUMEABLES: ATM_LOCKED: 0 APPROVE_SPAR: TESTCASE_PRODUCT: QA_TEAM: FILENAME: ATM_ID: 7FA0EB52-6855-11E7-B7FA-5710D30A4651 ATM_MCOMMENTS: Copied from "DPQA_Workflow_v2/Scan_to_file/50081". RESOURCE_MEDIA: ATM_REQCOUNT: 33