PRIORITY: TEST_TYPE: APPROVED_QE: INPUT: The device under test should be loaded with latest software. All the possile parameters should be configured using the assigned interface (CWIS,LUI or SNMP) FILES: TESTCASE_HEADLINE: [Use Case-Case 59] TESTCASE_VERSION: FEATURE: APPROVE_SE: SPEC_VERSION: MFF: TESTCASE_PLATFORM: SPEC: HISTORY: CDATE: 1500010209 TESTCASE_APPROVALS: TESTCASE_STATE: OUTPUT: All the input settings should be configurable and the scan to file job should complete successfully. Validate that all the configured parameters are reflecting in the output, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , FILEDESC: PROCESS: RESOURCE_HW: TC_WEIGHTAGE: MDATE: 1500010209 APPROVED_SPAR: SKILL_SET: TESTCASE_SOURCE: APPROVE_QE: TEST_CASE_TYPE: APPROVED_SE: PLANNEDTIMESTAFF: ATM_OWNER: AUTHOR: W4XHW30J LOE: ASSOCIATED_TESTCASES: ATM_REQLINK: E709B086-6E6F-1014-B0F1-BFDD8645D1C1, 75FFA7C1-6E72-1014-AFCC-CD7D1C09CDB5, 76052767-6E72-1014-A68B-9E83FD7A9195, 760BC813-6E72-1014-AED2-BFF53A8007E8, 6D8DA6C6-6E73-1014-A420-95F974F9D97C, 6DB2D2CB-6E73-1014-AEFF-91D46C14AA1C, 6DBBBA0E-6E73-1014-9B27-849817164EDD, 6DBE5620-6E73-1014-B9B4-A68670528AF5, 6DC10002-6E73-1014-8CEE-F6F8FC1E1FC0, 6DC39855-6E73-1014-BECF-BE119B37B30D, 6DC67492-6E73-1014-BDEE-D831A2FDDF61, 6DC9161C-6E73-1014-BBF8-CC20B067BDAC, 6DCB9F1D-6E73-1014-A293-D95393918124, 6DCE8D85-6E73-1014-93CB-B4E25C13FC5F, 41932766-6EB0-1014-8BFC-B5D0591256B9, 42300FF1-6EB0-1014-8869-E71C2007B7B4, 446631C8-70B7-1014-A741-BC37E7F15FA7, F6599B03-6E5F-1014-98E2-F2014E65519D, 6246A499-6FAF-1014-918B-FA32642BF927, 62AD0A80-6FAF-1014-95B6-F04B89349BFB, 62B4E30E-6FAF-1014-819F-D23AD7A7AC68, 62C6FB16-6FAF-1014-AE68-BF7DA38DAAA6, 191A36D9-70EF-1014-8F6C-A8A3BE8EB60D, 1A50001D-70EF-1014-B960-DE15C033A558, 1B9A8A29-70EF-1014-9502-80DCBE6C68FA, 1C5881A4-70EF-1014-BF98-9AE0B3F75800, 1C5B3CED-70EF-1014-9479-ED27154A48C5, 1C64F899-70EF-1014-BE38-C957B9C9D2C6, 1C68054C-70EF-1014-9C1C-FCC0157B2894, 1C6A5CA1-70EF-1014-BD29-C5EEA6F0C2A9, 1C6CBF36-70EF-1014-B905-E60C306D8945, 1C9EB472-70EF-1014-B6BA-EB50EAE70EA9, 1CA16316-70EF-1014-A93B-BD8CC4783FCE, 1CEA9402-70EF-1014-9BA2-F251B4B14286, 1D685CE4-70EF-1014-8D83-CD4D2360FF69 TRAINING: MUSER: W4XHW30J GROUP: SUB_FEATURE: SPEC_TAG: PROCEDURE: [Common Settings-Wireless-CustomCisco-Local-XSA-IPV4] [Template Configuration-Enter scan Destination Template] [Filing Protocol-Scan to File-SMB - Do not file with Kerberos Ticket] [Filing Policy-Add Date to Name] [Filing Address-IPV4] [XSM Enablement-Enabled] [Job Log(.XST)-Enabled] [Confirmation Sheet-Enabled] [Login Credentials-System/Stored in Template or Device] [File Format-PDF 1 File Per Page Image only] [OutputColor-GrayScale] [2 Sided Scanning-1 Sided] [Lighten/Darken-0] [Sharpness-0] [Contrast-Manual Contrast -2] [Background Suppression-Auto Suppression] [Resolution-72] [File SizeQuality-1] [Remove Blank Pages-ON] [Scan to Original Type-Text] [How Original was produced-Photocopied Original] [Original Orientation-Potrait Originals] [Edge Erase-Right] [Build Job-ON] [Original Size input-Preset Scan Area - A5 (LEF)] [Rotation Method-Not Applicable] [Mode of Input-Platern] , [44.101.006.4] (FT-14212) The CardholderTypeValidity associated with the employee badge number is set to “Valid” , [44.101.006.3] (FT-14212) The CardholderStatusValidity associated with the employee badge number is set to “Valid”, [44.101.006.2] (FT-14212) The Badge Status associated with the employee badge number is set to “Active”, [44.101.006.1] (FT-14212) The employee badge number exists on the Cisco / Microsoft Employee Badge Server , [44.101.006] (FT-14212) CCSFEAT17145 [D2.2-*] [+N%2c +R] User authentication shall be successful only if all the following conditions are TRUE:, [44.101.005] (FT-14212) CCSFEAT17144 [D2.2-*] [+N%2c +R] If user authentication is successful then operator shall be given access to authorized pathways%2c services%2c and/or features., [44.101.004] (FT-14212) CCSFEAT17143 [D2.2-*] [+N%2c +R] After the operator has swiped a card over the connected USB card reader the Xerox device shall display a message (i.e. “please wait…”) indicating that authentication is taking place. , [44.101.003] (FT-14212) CCSFEAT17142 [D2.2-*] [+N%2c +R] The Xerox device shall display the custom authentication blocking screen when custom authentication is enabled and the operator attempts to access a locked pathway%2c service%2c or feature. , [44.101.002] (FT-14212) CCSFEAT17141 [D2.2-*] [+N%2c +R] The Xerox device shall use the custom authentication setup username and password to authenticate itself to the Cisco / Microsoft Web Server before it is allowed to use the web service., [44.101.001] (FT-14212) CCSFEAT17140 [D2.2-* ] [+N%2c +R] The follow configuration setting shall be supported for Custom Authentication for Cisco and Microsoft, [44.100.004] (FT-14502) CCSFEAT17139 [D2.3-*] [+N%2c +R] The custom authentication method shall not be a visible/selectable authentication method until it has been explicitly enabled by the System Administrator., [44.100.003] (FT-14502) CCSFEAT17138 [D2.3-*] [+N%2c +R] The system shall allow only one custom authentication workflow to be enabled at a time., [44.100.001] (FT-14502) CCSFEAT17435 [D2.3-*] Custom Authentication shall be enabled via Feature Installation Key., [46.200.200.1] (FT-14212) PRINT: A Confirmation Sheet shall be printed ., [46.200.200] (FT-14212) The supported Confirmation Method values are the following: , [46.200.218.5] (FT-14212) System , CCSFEAT21254 The audit log entry data shall report events contained in table 1 below: , CCSFEAT3680 The SA shall have the ability via WebUI to Enable/Disable the protocol logs.  , [46.050.068] (FT-14212) The supported Resolution values are the following: 1. 72x72 2. 100x100 3. 150x150 4. 200x100 5. 200x200 6. 300x300 7. 400x400 8. 600x600 , [46.050.028] (FT-14212) The supported Input Edge Erase values are the following: 1. NONE 2. TOP: 0-50mm or 0-2in 3. LEFT: 0-50mm or 0-2in 4. BOTTOM: 0-50mm or 0-2in 5. RIGHT: 0-50mm or 0-2in , [46.050.073] (FT-14212) [+D2.2] The supported Blank Page Management settings are the following: Removal All Blank Pages – The scan services shall attempt to detect and remove any blank images., [46.050.065] (FT-14212) The supported Output Color values are the following on devices enabled for color scanning: 1. Full Color: Scanned image data is output in 24bit color%2c 8 bits per component. 2. Grayscale: Scanned image data is output in 8bpp grayscale. 3. Black/White: Output will be binary regardless of original color. 4. Auto Color Detect: The output is based on the detection of color on the document. If there is no color%2c the output will generally be Grayscale., [11.237.002] (FT-14212) The Original Type/Subtype selections that will be available for all scan services (Scan to email%2c Network Scan%2c I-FAX) are listed in Table 2. , [11.241.001] (FT-14212) For all services supported the control will have 5 levels: -2 to 2%2c where -2 will be the lowest sharpness (least sharp) and 2 will be the highest sharpness (sharpest). , [11.235.001] (FT-14212) The control shall have 7 levels: -3%2c -2%2c -1%2c 0%2c 1%2c 2%2c 3 where -3 will be the darkest and 3 will be the lightest setting. , [25.000.016] (FT-14212) The factory default selection for sides imaged is “1→1”. , [25.000.002.1] (FT-14212) Simplex scanning; , CCSFEAT13853 [D2.2-*] On devices which support color marking%2c the Web UI shall allow the SA to enable prompting for Color Only for Copy system functions., [46.200.089.1.1] (FT-14212) the SA shall be allowed to choose to use a System Login Name and Password to access the Repository., [46.200.249] (FT-14212) The default value for the Confirmation Sheet Policy shall be Errors Only , [46.200.192.3] (FT-14212) [D2.2-*] the scan service shall store the job log (.XST) in the XSM sudirectory , [46.200.192.2] (FT-14212) [D2.2-*] the scan service shall store all the generated files in the XSM subdirectory , [46.200.192.1] (FT-14212) [D2.2-*] the scan service shall create the XSM subdirectory , [46.200.192] (FT-14212) [D2.2-*] When XSM subdirectory is enabled and a Single Page - File Formats is specified… , [46.200.142.3] (FT-14212) GEN_DATE_TIME_ID: Stores documents with the device’s current date/time at job submission and an ordinal integer (if necessary) appended to the filename., [46.200.028.3] (FT-14212) SMB via NetBIOS over TCP/IP , [46.200.190] (FT-14212) [D2.2-*] The scan template creator shall be informed of the XSM subdirectory value (enabled/disable) for each system file repository that they have chosen to add to the scan template via the WebUI. , [46.200.189] (FT-14212) [D2.2-*] The scan template creator shall have the ability to enable/disable XSM Subdirectory setting for each file respository that they create for their template (non-system file repositories) via the WebUI. RESOURCE_CONSUMEABLES: ATM_LOCKED: 0 APPROVE_SPAR: TESTCASE_PRODUCT: QA_TEAM: FILENAME: ATM_ID: 809D0E1E-6855-11E7-B7FA-5710D30A4651 ATM_MCOMMENTS: Copied from "DPQA_Workflow_v2/Scan_to_file/50099". RESOURCE_MEDIA: ATM_REQCOUNT: 35