ATM_ID: BEEBC686-365B-11E8-B0DE-C609C298612E

MFF:

PLANNEDTIMESTAFF:

ID: Install_Wizard_Testing_V4.0/109519

TESTCASE_HEADLINE: [IWT-- 6]

GROUP:

FEATURE:

SUB_FEATURE:

INPUT:

PROCEDURE: [FAX Card Availability--Yes]
[PLQA Voltage - 110V]
[Power Off/ Restart the device -- Power Off]
[After Power UP the device before IW Steps -- ]
[Language choice --Danish]
[KB layout--Default]
[Show Language option on home--Yes]
[Network connection--Wired]
[Insert SIM--When prompted]
[Insert Invalid SIM--No]
[Insert SIM option--Recheck]
[PP Pin entry--Skip]
[Billing Plan--Enter]
[Hole Punch--Change (If Finisher available/supports)]
[Time zone--America (PST/EST)]
[Time--Change]
[Time format--12h]
[Date--No change]
[Contacts--Change]
[Additional Install Option -IP Address Settings--No change]
[IPv4--Default-ON]
[IPv6--Default-Off]
[Use DHCP/Static--Default-DHCP]
[Fax options--Change]
[Fax Country--Australia]
[Fax Line 1 Number--Enter Number]
[Fax Line 1 Name--Enter Alpha numeric ]
[Fax Line 1 Option--Send Only]
[Fax Line 2 Number--Enter Number]
[Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--NA[Fax Line 2 Name--Not Configured[Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--Not Configured[Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--Not Configured[Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--Not Configured[Fax Line 2 Name--NA[Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--Not Configured[Fax Line 2 Name--Not Configured[Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--Enter Alpha numeric [Fax Line 2 Name--Not Configured
[Fax Line 2 Option--Send & Receive]
[Value seen under "Additional Install options"--
IP Address settingsConfigured]
[Value seen under "Additional Install options"--
Contact  NumbersConfigured]
[Value seen under "Additional Install options"--
Fax SetupConfigured]
[USB Insert--Yes]
[Do you have configuration File (Clone)?--Yes]
[Prompt for Insert USB Drive--No Prompt]
[Do you have configuration File (Clone)?--NA]
[Install from USB--Files be listed and Select]
[Install Prompt Screen--Cancel]
[Install from USB--Files be listed and Select]
[Install Prompt Screen--Install]
[Paper preference--NA]
[Device Network settings--NA]
[Password Screen appears--NA]
[Change Admin Password Screen Apear--NA]
[Device Setup Complete--Restart]
[Icon Should be displayed in Devicesetup complete--Print and Copy Icon]
[Validate the Service Plan(606-269) in KO settings/Diagnostic--Sold = 0 or Metered = 1 or ThirdParty = 2 or Metered (XeroxManagedSupplies) = 3 or PagePack = 4 or DmoSold = 5]
[Regional Differentiator value (616-331)--DMO_Enterprise = 6 or  Metered = 7 or WW_Enterprise = 13 or NA_XE_Enterprise = 15]

OUTPUT: The Device will proceed with  install wizard process after Power down on "Insert  sim option" screen and the wizard should be successful with the install wizard setup options retained(BIM,Paper preference, Time Zone,IP etc..).
 The "Supplies Plan Entry" screen should not be displayed on LUI after device reboot. The Service plan will be on "Pagepack".

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC:

SPEC_VERSION:

SPEC_TAG: Mapping Not Required

ATM_OWNER:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1522662830

MDATE: 1522662830

MUSER: q4BVX0J1

AUTHOR: q4BVX0J1

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK:

ATM_REQCOUNT: 0

QA_TEAM:

TC_WEIGHTAGE:

FILENAME:

FILEDESC:

FILES: