ATM_ID: A54E91F4-8227-11E9-802B-234BF6333A5F

ID: PUQE-CFT_Atlantis_2.0-D5.1/FS_22.020_Installation_and_Configuration_Wizard/40726

TESTCASE_HEADLINE: Check if the core network configurations can be added manually at any time during the Intranet test.

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: 
  1. Bring the MFD to Install Wizard mode using the MITS tool.

  2. MFD has wired/wireless network connection.

PROCEDURE: 
  1. Run the Install Wizard.

  2. In "Auto Acquire Device Profile" screen when the Intranet test is active ("Connecting to the network") select "Manually Connect" option and check the result.

  3. In the "IP Address Settings" screen manually add/edit the below Network configurations.
     i) IP Address - mandatory
     ii) DNS Server Address - mandatory
     iii) Subnet Mask - mandatory
     iv) Gateway Server address - mandatory
     v) Host Name - optional

  4. Choose 'Next' in the "IP Address Settings" screen and check the result.

OUTPUT: 
  2. The "IP Address Settings" screen should be displayed.

  3. The core network configurations can be added manually at any time during the Intranet test.

  4. After adding/editing the core Network configurations manually the MFD should attempt to establish Network Connectivity. The screen should display as "Connecting to the network" indicated by a spinning wheel.

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: 22.020.190, 22.020.192, 22.020.192.001, 22.020.192.002, 22.020.192.003, 22.020.192.004, 22.020.192.005, 22.020.193

SPEC_VERSION: v1.105

SPEC_TAG: [22.020.190] (FT-22908) The Device shall allow the User to Manually add the core network configurations at any time while this test is active.  [22.020.192] (FT-22908) The Device shall display a option screen to manually add/edit the following Network protocols  • [22.020.192.001] (FT-22908) IP Address - mandatory   • [22.020.192.002] (FT-22908) DNS Server Address - mandatory  • [22.020.192.003] (FT-22908) Subnet Mask - mandatory  • [22.020.192.004] (FT-22908) Gateway Server address- mandatory  • [22.020.192.005] (FT-22908) Host Name – optional  [22.020.193] (FT-22908) On “Close” of this Manual input screen, the Device shall attempt to establish Network Connectivity

ATM_OWNER:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1559144240

MDATE: 1559144240

MUSER: w4y5hbch

AUTHOR: w4y5hbch

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK: 5AC08F4E-78A3-11E9-98A5-CB618F5C58D9, 5AC7D4CA-78A3-11E9-98A5-CB618F5C58D9, 5ACA5D94-78A3-11E9-98A5-CB618F5C58D9, 5ACCBCBA-78A3-11E9-98A5-CB618F5C58D9, 5ACF3C7E-78A3-11E9-98A5-CB618F5C58D9, 5AD209EA-78A3-11E9-98A5-CB618F5C58D9, 5AD4EFAC-78A3-11E9-98A5-CB618F5C58D9, 5AD7902C-78A3-11E9-98A5-CB618F5C58D9

ATM_REQCOUNT: 8

FILENAME:

FILEDESC:

FILES:

QA_TEAM:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

MFF:

PLANNEDTIMESTAFF:

IMPLEMENTED:

DATA_LOGIC:

AUTOMATABLE_NOTAUTOMATABLE:

TC_WEIGHTAGE: