ATM_ID: A561EC2C-8227-11E9-802B-234BF6333A5F

ID: PUQE-CFT_Atlantis_2.0-D5.1/FS_22.020_Installation_and_Configuration_Wizard/40727

TESTCASE_HEADLINE: Check if the device advertises the Intranet test result (Failure Case).  Check if the core network configurations can be added manually when the Intranet test fails.

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: 
  1. Bring the MFD to Install Wizard mode using the MITS tool.

  2. MFD has wired/wireless network connection.

PROCEDURE: 
  1. Run the Install Wizard.

  2. In "Auto Acquire Device Profile" screen when the Intranet test is active ("Connecting to the network") remove the network cable or the wireless dongle.

  3. Check the screen after the Intranet test has failed.

  4. Select "Manually Connect" option and manually add/edit the below Network configurations.
     i) IP Address - mandatory
     ii) DNS Server Address - mandatory
     iii) Subnet Mask - mandatory
     iv) Gateway Server address - mandatory
     v) Host Name - optional

  5. Choose 'Next' in the "IP Address Settings" and check the result.

OUTPUT: 
  3. The "Auto Acquire Device Profile" screen shall display as "Could not acquire IP address" indicated by an Alert symbol.

  4. The user can modify or accept these values.
    Note: If the user does make a change to IP address and chooses Next then the Device shall treat this as a Static IP Address.

  5. After adding/editing the core Network configurations manually the MFD should reattempt to establish Network Connectivity. The screen shall display as "Connecting to the network" indicated by a spinning wheel.

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: 22.020.191, 22.020.192, 22.020.192.001, 22.020.192.002, 22.020.192.003, 22.020.192.004, 22.020.192.005, 22.020.193

SPEC_VERSION: v1.105

SPEC_TAG: [22.020.191] (FT-22908) If The Device cannot obtain the a routable IP address, then the Device shall advertise failure and provide an option to Manually add each non-configured Network setting.  [22.020.192] (FT-22908) The Device shall display a option screen to manually add/edit the following Network protocols  • [22.020.192.001] (FT-22908) IP Address - mandatory   • [22.020.192.002] (FT-22908) DNS Server Address - mandatory  • [22.020.192.003] (FT-22908) Subnet Mask - mandatory  • [22.020.192.004] (FT-22908) Gateway Server address- mandatory  • [22.020.192.005] (FT-22908) Host Name – optional  [22.020.193] (FT-22908) On “Close” of this Manual input screen, the Device shall attempt to establish Network Connectivity

ATM_OWNER:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1559144240

MDATE: 1559144240

MUSER: w4y5hbch

AUTHOR: w4y5hbch

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK: 5AC4F0F2-78A3-11E9-98A5-CB618F5C58D9, 5AC7D4CA-78A3-11E9-98A5-CB618F5C58D9, 5ACA5D94-78A3-11E9-98A5-CB618F5C58D9, 5ACCBCBA-78A3-11E9-98A5-CB618F5C58D9, 5ACF3C7E-78A3-11E9-98A5-CB618F5C58D9, 5AD209EA-78A3-11E9-98A5-CB618F5C58D9, 5AD4EFAC-78A3-11E9-98A5-CB618F5C58D9, 5AD7902C-78A3-11E9-98A5-CB618F5C58D9

ATM_REQCOUNT: 8

FILENAME:

FILEDESC:

FILES:

QA_TEAM:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

MFF:

PLANNEDTIMESTAFF:

IMPLEMENTED:

DATA_LOGIC:

AUTOMATABLE_NOTAUTOMATABLE:

TC_WEIGHTAGE: