ATM_ID: A58A0B80-8227-11E9-802B-234BF6333A5F

ID: PUQE-CFT_Atlantis_2.0-D5.1/FS_22.020_Installation_and_Configuration_Wizard/40734

TESTCASE_HEADLINE: Check if the MFD advertises the Internet test result (Failure Case).  Check if the Proxy server details can be entered manually when the Internet test fails.

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: 
  1. MFD has wired/wireless network connection.

  2. Bring the MFD to Install Wizard mode using the MITS tool.

  3. Run the Install Wizard until a successful Intranet test i.e.; "Connected to network".

  4. Proxy Server details (Proxy Address; Port Number and Credentials) are required.

PROCEDURE: 
  1. In "Auto Acquire Device Profile" screen; when the Internet test is active ("Connecting to Xerox"); wait till the device tries to auto-discover a proxy server address and fails. Check the screen after the Internet test has failed.

  2. Select the "Manually Connect" option and check the result.

  3. Select "Manual Web Proxy" option in the popover and check the result.

  4. In Proxy Server screen; enable the Proxy Server option. Check the result.

  5. Enter the Proxy Server address; Port Number and the credentials. Then check the result.

OUTPUT: 
  1. The "Auto Acquire Device Profile" screen shall display as "Could not connect to Xerox" indicated by an Alert symbol. And the "Manually Connect" option should be displayed.

  2. A popover should be displayed with two options.
    i. Manual address of existing device
    ii. Manual Web Proxy

  3. The Proxy Server screen should be displayed.

  4. Now the Proxy server details can be entered manually.

  5. After entering the Proxy server details manually; the MFD should retry connecting to XCLS. The screen shall display as "Connecting to Xerox" indicated by a spinning wheel.

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: 22.020.209, 22.020.209.001, 22.020.210

SPEC_VERSION: v1.105

SPEC_TAG: [22.020.209] (FT-22908) If internet connectivity cannot be established after the Device has tried to auto-Discover a Proxy - the Device shall display a failure to connect to Xerox Backend Server (XCLS) and present to the installer with the options to Manually enter certain connectivity attributes which prevent internet access. These options shall be:  a. [22.020.209.001] (FT-22908) Proxy – a field shall be presented to enter in either a Proxy (IP addr or Host Name). The Next button will then prompt the user to enter in the Proxy port number.  [22.020.210] (FT-22908) Upon exit of these fields the Device shall reattempt to establish internet connectivity.

ATM_OWNER:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1559144240

MDATE: 1559144240

MUSER: w4y5hbch

AUTHOR: w4y5hbch

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK: 5AFC3260-78A3-11E9-98A5-CB618F5C58D9, 5AFF027E-78A3-11E9-98A5-CB618F5C58D9, 5B032944-78A3-11E9-98A5-CB618F5C58D9

ATM_REQCOUNT: 3

FILENAME:

FILEDESC:

FILES:

QA_TEAM:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

MFF:

PLANNEDTIMESTAFF:

IMPLEMENTED:

DATA_LOGIC:

AUTOMATABLE_NOTAUTOMATABLE:

TC_WEIGHTAGE: