ATM_ID: A5BEB042-8227-11E9-802B-234BF6333A5F

ID: PUQE-CFT_Atlantis_2.0-D5.1/FS_22.020_Installation_and_Configuration_Wizard/40741

TESTCASE_HEADLINE: Auto-discovery of Proxy - Case 2 (friendly Xerox machine responded, Connectivity attributes received, Not Connected to XCLS)

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: 
  1. MFD has wired/wireless network connection.

  2. Bring the MFD to Install Wizard mode using the MITS tool.

  3. Run the Install Wizard until a successful Intranet test i.e.; "Connected to network".

  4. Open the Web UI of the MFD using the IP address displayed in the SR3 region. Go to Properties -- Security -- logs -- Network Troubleshooting; start a session.

  5. Configure the below settings in few other MFDs which belong to the same network as the test MFD.
    i. Go to Web UI -- Properties -- General Setup -- Remote Services; configure an incorrect HTTP Proxy Server.
    ii. Go to Web UI -- Properties -- Connectivity -- Setup; enable WSD (Web Services on Device).

PROCEDURE: 
  1. In "Auto Acquire Device Profile" screen; when the Internet test is active ("Connecting to Xerox"); wait until the device auto-discovers a proxy server address.

  2. After the Internet test has failed; stop the Network Troubleshooting log session and download the log file from the Web UI.

  3. Open the logs using the Wireshark application and check the following actions.
      i. The device has called the XCLS server regardless of the presence of a proxy server; and has failed to connect.
      ii. The device has tried to discover friendly machines on the network.
      iii. A friendly machine has responded.
      iv. The device has requested the connectivity attributes (usually the Proxy server address; but also DNS address if null) from the friendly machine.
      v. The device has received the connectivity attributes.
      vi. The device has tried to call the XCLS server again using the new attributes.
      vii. Still; the device is unable to connect to the XCLS server.

  4. Use the "Manually Connect" option to enter the valid proxy server address manually and complete the Install Wizard.

OUTPUT: 
  1. The "Auto Acquire Device Profile" screen on the LUI shall display as "Connecting to Xerox" indicated by a spinning wheel.

  2. The "Auto Acquire Device Profile" screen shall display as "Could not connect to Xerox" indicated by an Alert symbol. And the "Manually Connect" option should be displayed.

  3. The logs should show the device trying to auto-discover a proxy server address to connect to the XCLS server.

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: 22.020.205, 22.020.205.001, 22.020.206, 22.020.209

SPEC_VERSION: v1.107

SPEC_TAG: [22.020.205] (FT-24594) [D5.1-*] If the call to XCLS fails, immediately the Device shall attempt to discover ‘Friendly’ Xerox machines on the network from which it can obtain the necessary info (usually the Proxy server address, but also DNS address if null) such that it can again attempt this connectivity call to XCLS.  [22.020.205.001] (FT-24594) [D5.1-*]  Upon discovery of Friendly, the Device shall securely request from the Friendly - connectivity attributes (such as Proxy Server and creds and/or DNS).  [22.020.206] (FT-24594) [D5.1-*] If the Device obtains necessary addresses to make an internet call, the Device shall then utilize the connectivity attributes to again attempt the call to the XCLS server. If call to XCLS is successful, it shall store these new connectivity attributes.  [22.020.209] (FT-22908) If internet connectivity cannot be established after the Device has tried to auto-Discover a Proxy - the Device shall display a failure to connect to Xerox Backend Server (XCLS) and present to the installer with the options to Manually enter certain connectivity attributes which prevent internet access.

ATM_OWNER:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1559144240

MDATE: 1559144240

MUSER: w4y5hbch

AUTHOR: w4y5hbch

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK: 5A17FE56-78A3-11E9-98A5-CB618F5C58D9, 5A1A6D9E-78A3-11E9-98A5-CB618F5C58D9, 5A1D1B84-78A3-11E9-98A5-CB618F5C58D9, 5AFC3260-78A3-11E9-98A5-CB618F5C58D9

ATM_REQCOUNT: 4

FILENAME:

FILEDESC:

FILES:

QA_TEAM:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

MFF:

PLANNEDTIMESTAFF:

IMPLEMENTED:

DATA_LOGIC:

AUTOMATABLE_NOTAUTOMATABLE:

TC_WEIGHTAGE: