ATM_ID: A5C4E0E8-8227-11E9-802B-234BF6333A5F

ID: PUQE-CFT_Atlantis_2.0-D5.1/FS_22.020_Installation_and_Configuration_Wizard/40742

TESTCASE_HEADLINE: Check if the details of an existing Xerox device can be entered manually when the Internet test fails.

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: 
  1. MFD has wired/wireless network connection.

  2. Bring the MFD to Install Wizard mode using the MITS tool.

  3. Run the Install Wizard until a successful Intranet test i.e.; "Connected to network".

  4. Configure the below settings in another MFD which belongs to the same network as the test MFD.
    i. Go to Web UI -- Properties -- General Setup -- Remote Services; configure a valid HTTP Proxy Server.
    ii. Go to Web UI -- Properties -- Connectivity -- Setup; enable WSD (Web Services on Device).

PROCEDURE: 
  1. In "Auto Acquire Device Profile" screen; when the Internet test is active ("Connecting to Xerox"); wait till the device tries to auto-discover a proxy server address and fails. Check the screen after the Internet test has failed.

  2. Select the "Manually Connect" option and check the result.

  3. Select "Manual address of existing device" option in the popover and check the result.

  4. Enter the IP address/Host name of the existing MFD that has a Proxy Server configured and the web services enabled. Then check the result.

OUTPUT: 
  1. The "Auto Acquire Device Profile" screen shall display as "Could not connect to Xerox" indicated by an Alert symbol. And the "Manually Connect" option should be displayed.

  2. A popover should be displayed with two options.
    i. Manual address of existing device
    ii. Manual Web Proxy

  3. The Device IP Address screen should be displayed.

  4. After entering the details of an existing Xerox device; the MFD should retry connecting to XCLS. The screen shall display as "Connecting to Xerox" indicated by a spinning wheel.

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: 22.020.209, 22.020.209.002, 22.020.210

SPEC_VERSION: v1.107

SPEC_TAG: [22.020.209] (FT-22908) If internet connectivity cannot be established after the Device has tried to auto-Discover a Proxy - the Device shall display a failure to connect to Xerox Backend Server (XCLS) and present to the installer with the options to Manually enter certain connectivity attributes which prevent internet access. These options shall be:  b. [22.020.209.002] (FT-24594) [D5.1-*] Other known Xerox Device (IP address or Hostname of that Device) – that we can call to get the Attributes  [22.020.210] (FT-22908) Upon exit of these fields the Device shall reattempt to establish internet connectivity.

ATM_OWNER:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1559144240

MDATE: 1559144240

MUSER: w4y5hbch

AUTHOR: w4y5hbch

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK: 5AFC3260-78A3-11E9-98A5-CB618F5C58D9, 5A2CE8CA-78A3-11E9-98A5-CB618F5C58D9, 5B032944-78A3-11E9-98A5-CB618F5C58D9

ATM_REQCOUNT: 3

FILENAME:

FILEDESC:

FILES:

QA_TEAM:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

MFF:

PLANNEDTIMESTAFF:

IMPLEMENTED:

DATA_LOGIC:

AUTOMATABLE_NOTAUTOMATABLE:

TC_WEIGHTAGE: