ATM_ID: A5CBDFC4-8227-11E9-802B-234BF6333A5F

ID: PUQE-CFT_Atlantis_2.0-D5.1/FS_22.020_Installation_and_Configuration_Wizard/40743

TESTCASE_HEADLINE: Auto-discovery of Proxy - Case 3 (friendly Xerox machine responded, No Connectivity attributes received)

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: 
  1. MFD has wired/wireless network connection.

  2. Bring the MFD to Install Wizard mode using the MITS tool.

  3. Run the Install Wizard until a successful Intranet test i.e.; "Connected to network".

  4. Open the Web UI of the MFD using the IP address displayed in the SR3 region. Go to Properties -- Security -- logs -- Network Troubleshooting; start a session.

  5. Configure the below settings in few other MFDs which belong to the same network as the test MFD.
    i. Go to Web UI -- Properties -- General Setup -- Remote Services; do not configure a HTTP Proxy Server.
    ii. Go to Web UI -- Properties -- Connectivity -- Setup; enable WSD (Web Services on Device).

PROCEDURE: 
  1. In "Auto Acquire Device Profile" screen; when the Internet test is active ("Connecting to Xerox"); wait until the device auto-discovers a proxy server address.

  2. After the Internet test has failed; stop the Network Troubleshooting log session and download the log file from the Web UI.

  3. Open the logs using the Wireshark application and check the following actions.
      i. The device has called the XCLS server regardless of the presence of a proxy server; and has failed to connect.
      ii. The device has tried to discover friendly machines on the network.
      iii. A friendly machine has responded.
      iv. The device has requested the connectivity attributes (usually the Proxy server address; but also DNS address if null) from the friendly machine.
      v. No connectivity attributes are received from the friendly machine within time.

  4. Select Manually Connect -- Manual Web Proxy option. Enable the Proxy Server and check if the device continues to use its current attributes.

  5. Enter the valid proxy server address manually and complete the Install Wizard.

OUTPUT: 
  1. The "Auto Acquire Device Profile" screen on the LUI shall display as "Connecting to Xerox" indicated by a spinning wheel.

  2. The "Auto Acquire Device Profile" screen shall display as "Could not connect to Xerox" indicated by an Alert symbol. And the "Manually Connect" option should be displayed.

  3. The logs should show the device trying to auto-discover a proxy server address to connect to the XCLS server.

  4. The device should continue to use its current attributes. It may not attempt to contact another friendly machine.

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: 22.020.205, 22.020.205.001, 22.020.206.001, 22.020.206.002

SPEC_VERSION: v1.107

SPEC_TAG: [22.020.205] (FT-24594) [D5.1-*] If the call to XCLS fails, immediately the Device shall attempt to discover ‘Friendly’ Xerox machines on the network from which it can obtain the necessary info (usually the Proxy server address, but also DNS address if null) such that it can again attempt this connectivity call to XCLS.  [22.020.205.001] (FT-24594) [D5.1-*]  Upon discovery of Friendly, the Device shall securely request from the Friendly - connectivity attributes (such as Proxy Server and creds and/or DNS).  [22.020.206.001] (FT-24594 ) [D5.1-*] If no connectivity configs are received from the Friendly within xxx time, then the Device shall continue to use its current conn configs that were obtained earlier (likely from DHCP).  [22.020.206.002] (FT-24594) [D5.1-*] If a Friendly responded but no configs arrived within allotted time it may not attempt to contact another Friendly

ATM_OWNER:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1559144240

MDATE: 1559144240

MUSER: w4y5hbch

AUTHOR: w4y5hbch

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK: 5A17FE56-78A3-11E9-98A5-CB618F5C58D9, 5A1A6D9E-78A3-11E9-98A5-CB618F5C58D9, 5A1D1B84-78A3-11E9-98A5-CB618F5C58D9, 5A1FFE8A-78A3-11E9-98A5-CB618F5C58D9

ATM_REQCOUNT: 4

FILENAME:

FILEDESC:

FILES:

QA_TEAM:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

MFF:

PLANNEDTIMESTAFF:

IMPLEMENTED:

DATA_LOGIC:

AUTOMATABLE_NOTAUTOMATABLE:

TC_WEIGHTAGE: