ATM_ID: F68B46C8-9D77-11E9-8A06-0649AA3FCFED

ID: PUQE-CFT_Atlantis_2.0-D5.1/FS_22.080_Software_upgrade/Common_Testcases/41380

TESTCASE_HEADLINE: Validate if the user shall able to booting from USB and also be able to netboot via mtar using existing HDD/SDD installed device

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: " 1. Make sure the Device is in D5.1 release 2. Make sure the device has existing HDD/SDD 3. Start with a USB drive containing a FAT file system. 4. Make sure the USB ports are enabled 5. Make sure to have Terminal window opened so they can press esc to load from USB when a bootable HDD/SSD is present 5. From Windows (or Linux), with access to network drives, prepare the USB drive: i) Create a top-level folder called EFI. ii) Within the EFI folder, create another folder called BOOT. iii) Within the BOOT folder, add the following three files:     a) One release payload file (*.txz)         Copy from /project/dvl/Deliveries/D5.1/[product]/[platform]/[version]/mtar/         Example: /project/dvl/Deliveries/D5.1/lipari-mid/explorer65/105.010.009.09400/mtar     b) Matching version of MTAR installer         Copy from /project/dvl/Deliveries/os/D5.1/[platform]/*swup_usb.txz         Example: /project/dvl/Deliveries/os/D5.1/explorer65/explorer65_wrl90-wrt90-rt-x64-hd1_105.009.09400_swup_usb.txz         Rename file to swup_usb.txz     c) Matching version of OS platform         Copy from /project/dvl/Deliveries/os/D5.1/[platform]/*bootmgr.efi         Example: /project/dvl/Deliveries/os/D5.1/explorer65/explorer65_wrl90-wrt90-rt-x64-hd1_105.009.09400_bootmgr.efi         Rename file to bootx64.efi         Note that ""mgr"" changes to ""x64"".   6) Eject and remove USB drive. "

PROCEDURE: " 1) Start with machine in OFF state. 2) Insert USB drive. 3) Power on. ----- Temporary section for unsecure boot ----- 4) When console screen clears and displays ""Press Esc for boot options""; IMMEDIATELY press <Esc> once. 5) Enter BIOS password if prompted. 6) Select Boot Manager. 7) Select USB device. ----- End temporary section ----- Installation will now proceed automatically; and take about 6 minutes. At the end; the machine will power down. 8) Remove the USB drive. 9) Power On. 10) Check the upgrade status Note : Step 4 requires a quick response after step 3. "

OUTPUT: " Machine should complete its upgrade process "

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: 22.080.1641

SPEC_VERSION: v1.0122

SPEC_TAG: [22.080.1641] (FT-21883) [D5.1-*] The device shall boot to upgrade mode from the images (OS, system Boot Manager along with SWUP module (Payload installer)) and alt-boot install the Full DLM release present in the USB flash drive.

ATM_OWNER:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1562147417

MDATE: 1562147417

MUSER: w4y5hbch

AUTHOR: w4y5hbch

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK: 792EF254-6D90-11E9-BA9B-E393A081695E

ATM_REQCOUNT: 1

FILENAME:

FILEDESC:

FILES:

QA_TEAM:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

MFF:

PLANNEDTIMESTAFF:

IMPLEMENTED:

DATA_LOGIC:

AUTOMATABLE_NOTAUTOMATABLE:

TC_WEIGHTAGE: