ATM_ID: 970F7600-7177-11E9-84E5-A6D1905C58D9 ID: PUQE-CFT_Atlantis_2.0-D5.1/FS_22.080_Software_upgrade/Kiska_Specific/39903 TESTCASE_HEADLINE: To verify that the module number 7 had been assigned for CH Finisher GROUP: FEATURE: SUB_FEATURE: INPUT: 1. Connect CH finisher to the device. 2. Use DLM with upgrade version of CH finisher. PROCEDURE: 1. Perform a Forced altboot upgrade. 2.Login into WINSCP. Enter Ip as hostname and give password 3. Check the Swupgrade.log file (var/log/swupgrade) after upgrade completed. 4. Check the module ID assigned to CH Finisher module (via tera term enter cd opt/nc/dlms/upgrade/data/current and then ls). OUTPUT: 1. Ensure the software upgrade completed successfully and Software Version is updated in Software Upgrade report and also in configuration report. 2. Verify that the CH Finisher version is updated in configuration report and diagnostics feature. 3.Check also in SNMP(1. Enter the Device IP in the MIB tool 2.Walk 'sysdescr' MIB object) and verify that ‘Sysdescr’ value should match with correct software version. 3.Verify that the CH Finisher assinged module number 7 have been updated. PROCESS: PRIORITY: TEST_TYPE: LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: TEST_CASE_TYPE: TESTCASE_SOURCE: SPEC: 22.080.1615 SPEC_VERSION: 1.0123. SPEC_TAG: [22.080.1615] (FT-23717,FT-24474) [D4.0M-*] [+Ksk] The CH Finisher module shall be assigned module number 7 and the finisher software shall be upgradable. ATM_OWNER: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_APPROVALS: CDATE: 1557309406 MDATE: 1557309406 MUSER: w4y5hbch AUTHOR: w4y5hbch ATM_MCOMMENTS: Imported from spreadsheet HISTORY: ATM_LOCKED: ATM_REQLINK: 7B51E492-6D90-11E9-BA9B-E393A081695E ATM_REQCOUNT: 1 FILENAME: FILEDESC: FILES: QA_TEAM: APPROVE_QE: APPROVED_QE: APPROVE_SE: APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: MFF: PLANNEDTIMESTAFF: IMPLEMENTED: DATA_LOGIC: AUTOMATABLE_NOTAUTOMATABLE: TC_WEIGHTAGE: