PRIORITY:

TEST_TYPE:

APPROVED_QE:

INPUT: Use Incremental release for upgrade.

FILES:

TESTCASE_HEADLINE: Validate that the device shall have the option to save to the GM launch release within the device.

TESTCASE_VERSION:

AUTOMATABLE_NOTAUTOMATABLE:

FEATURE:

APPROVE_SE:

SPEC_VERSION: 1.0115.

MFF:

TESTCASE_PLATFORM:

SPEC: [22.080.1275] (FT-20762) [D3.6-*]

HISTORY:

DATA_LOGIC:

CDATE: 1544079011

TESTCASE_APPROVALS:

TESTCASE_STATE:

OUTPUT: The device should save the GM launch release within the device after upgrade. The device should accepts the new D4.0 DLM file and upgrade only updated modules successfully. Also verify the printed software upgrade and configuration report. ,

FILEDESC:

PROCESS:

RESOURCE_HW:

TC_WEIGHTAGE:

APPROVED_SPAR:

MDATE: 1544079011

SKILL_SET:

TESTCASE_SOURCE:

TEST_CASE_TYPE:

APPROVE_QE:

APPROVED_SE:

PLANNEDTIMESTAFF:

ATM_OWNER:

AUTHOR: W44npx4w

IMPLEMENTED:

LOE:

ASSOCIATED_TESTCASES:

ATM_REQLINK: 179D9E20-F3EF-11E8-98D2-317FCDD1F86B

TRAINING:

GROUP:

MUSER: W44npx4w

SUB_FEATURE:

SPEC_TAG: Device shall provide a way to save the GM launch release within the device, in a location that is available for all upgrade types. [22.080.1275.1] (FT-20762) [D3.6-*] GM Creation process used in manufacturing shall be able to upgrade the device to GM launch release. [22.080.1275.2] (FT-20762) [D3.6-*] Customer devices running Pre-Launch release like ICAT/FOX/ECAT shall be able to upgrade to GM launch release. [22.080.1276] (FT-20762) [D4.0-*] All system releases, including SPAR releases and major customer releases shall be incremental releases based on GM launch release.

PROCEDURE: 1. Insert USB stick in the device rear port while the device is in ready state. 
2. Observe that device accepts the DLM file and performs the SW upgrade with all the modules 
3. Confirm that the device came to ready state without any issue after completion of successful upgrade. 
4.Then submit the D4.0 release via CWIS->Login as Admin->Properties->General Setup->Software Upgrade. 5.Observe that device accepts the DLM file and performs the SW upgrade   with the particular module and also note down the timeline while upgrading the device ● Time from submit to going to reboot ● Time till SW Upgrade Please Wait.. ● Time for all modules complete ● Time of each reboot afterwards ● Time of upgrade report printed 
6.For confirming the WIPE installation We can see below trace via backchannel while upgrading the device/Save the backchannel log and see the below trace once e upgrade completed, 212960|WARN|SWUP|SWUPFaultLogger|2017-05-03 13:19:11 UTC Upgrade Type: PSRWipe 
7.Confirm that the device came to ready state without any issue after completion of successful upgrade.

RESOURCE_CONSUMEABLES:

ATM_LOCKED: 0

APPROVE_SPAR:

TESTCASE_PRODUCT:

QA_TEAM:

FILENAME:

ATM_ID: 2D32CB00-F923-11E8-BC3E-DA5C2412F61E

ATM_MCOMMENTS: Copied from "PUQE-CFT_Atlantis_2.0M/Corvo/FS_22.080_Software_upgrade/Common_Testcases/38290".

RESOURCE_MEDIA:

ATM_REQCOUNT: 1