PRIORITY:

TEST_TYPE:

APPROVED_QE:

INPUT: " 1. Make sure that the device is in TBD or higher release build version. 2. Make sure that the device do not have Launch DLM in following path path : /persistent/launch_dlm 3. Make Sure the pre-upgrade patch(TBD.dlm) are applied in the device 4. Make Sure to use the latest version of XDM/CWW Tool 5. Make Sure TBD differential DLM Software file which is TBD or later build(it should be in maximum of 250 MB file size) is been published using XDM/CWW Tool 6. Make sure that the pre-requisite package is available (with Launch DLM, Boot Folder, etc). "

FILES:

TESTCASE_HEADLINE: Validating the upgrade status, if Launch DLM is missing during software installation from Lower release software to Higher release software using Differential Build via XDM/CWW Tool Upgrade.

TESTCASE_VERSION:

AUTOMATABLE_NOTAUTOMATABLE:

FEATURE:

APPROVE_SE:

SPEC_VERSION: v1.0116

MFF:

TESTCASE_PLATFORM:

SPEC: 22.080.1642, 22.080.1643, 22.080.1547, 22.080.1547.001, 22.080.1549, 22.080.1549.002, 22.080.1549.001, 22.080.1550

HISTORY:

DATA_LOGIC:

CDATE: 1578306093

TESTCASE_APPROVALS:

TESTCASE_STATE:

OUTPUT: " 2. (i) Upgrade Reports status should be displayed as ""Launch Release Missing"" (ii) Fault ""95-313-00"" should be recorded in device fault history   (iii) Last Upgrade Attempt status should be displayed as: Translation ID Code - 6206 File Type - Software Upgrade Feedback String = Failed - Launch Release Missing. "

FILEDESC:

PROCESS:

RESOURCE_HW:

TC_WEIGHTAGE:

APPROVED_SPAR:

MDATE: 1578306093

SKILL_SET:

TESTCASE_SOURCE:

TEST_CASE_TYPE:

APPROVE_QE:

APPROVED_SE:

PLANNEDTIMESTAFF:

ATM_OWNER:

AUTHOR: w63LLLNF

IMPLEMENTED:

LOE:

ASSOCIATED_TESTCASES:

ATM_REQLINK: 793894BC-6D90-11E9-BA9B-E393A081695E, 795221DE-6D90-11E9-BA9B-E393A081695E, 79F031A8-6D90-11E9-BA9B-E393A081695E, 79F28822-6D90-11E9-BA9B-E393A081695E, 79F9BBBA-6D90-11E9-BA9B-E393A081695E, 79FD0EA0-6D90-11E9-BA9B-E393A081695E, 79FF6402-6D90-11E9-BA9B-E393A081695E, 7A01D3FE-6D90-11E9-BA9B-E393A081695E

TRAINING:

GROUP:

MUSER: w63LLLNF

SUB_FEATURE:

SPEC_TAG: "[22.080.1642] (FT-23188) [D4.0M-*] Launch DLM shall be saved within the device, to support BDC DLM installation. [22.080.1643] (FT-24192) [D4.0M-*] Product specific recovery patch shall be provided which shall enable remote installation/replacement of the launch DLM on machines that have lost the launch DLM or where the launch DLM is corrupted."  [22.080.1547] (FT- 23436) [D4.0-*] Device shall raise a fault, if appropriate Launch DLM is missing during differential dlm installation.    [22.080.1547.001] (FT- 23436) [D4.0-*] Device shall raise a fault, if Launch release DLM is not present during differential dlm installation.    [22.080.1549] (FT- 23436) [D4.0-*] Device shall indicate installation failure in upgrade report, if differential dlm installation fails.    [22.080.1549.002] (FT- 23436) [D4.0-*] The following status shall be provided in upgrade report.  • “Launch Release Missing”    [22.080.1549.001] (FT- 23436) [D4.0-*] The Fault code and status shall be recorded in upgrade report.    [22.080.1550] (FT- 23436) [D4.0-*] Device shall report in CWIS webpage, if differential dlm installation failed due to lack of appropriate launch dlm or if the launch dlm had been corrupted.

PROCEDURE: " 1. Perform upgrade using Latest TBD differential DLM through XDM/CWW Tool 2. Validate the status of the upgrade are reported in following areas (i) Upgrade Report (ii) Fault Code (iii) Last Upgrade Attempt status in CWIS "

RESOURCE_CONSUMEABLES:

ATM_LOCKED: 0

APPROVE_SPAR:

TESTCASE_PRODUCT:

QA_TEAM:

FILENAME:

ATM_ID: 5024A8BC-306E-11EA-BF1A-AE85B48AF888

ATM_MCOMMENTS: Copied from "PUQE-CFT_Atlantis_2.0-D5.1/FS_22.080_Software_upgrade/Common_Testcases/41841 Validating the upgrade status%2c if Launch DLM is missing during software installation from Lower release software to Higher release software using Differential Build via XDM/CWW Tool Upgrade.".

RESOURCE_MEDIA:

ATM_REQCOUNT: 8