PRIORITY: TEST_TYPE: APPROVED_QE: INPUT: 1.Connect the device backchannel with your PC. 2.Open Teraterm in your PC 3.Select the port and change the baud rate to 115200. 4.Provide username and password of the machine 5.Save logs with time stamp enabled 6.To check module details use the command cd opt/nc/dlms/upgrade/data/current) command through back channel or take the SWUP log from backchannel. FILES: TESTCASE_HEADLINE: To verify that if IIT will not communicate with the SPDH when upgrade from Bootcode and shall not pass any SPDH software version TESTCASE_VERSION: AUTOMATABLE_NOTAUTOMATABLE: FEATURE: APPROVE_SE: SPEC_VERSION: 1.0123. MFF: TESTCASE_PLATFORM: SPEC: 22.080.1593 HISTORY: DATA_LOGIC: CDATE: 1578306555 TESTCASE_APPROVALS: TESTCASE_STATE: OUTPUT: After the upgrade from Bootcode, IIT will not communicate with the SPDH and will send the version number to SBC FILEDESC: PROCESS: RESOURCE_HW: TC_WEIGHTAGE: APPROVED_SPAR: MDATE: 1578306555 SKILL_SET: TESTCASE_SOURCE: TEST_CASE_TYPE: APPROVE_QE: APPROVED_SE: PLANNEDTIMESTAFF: ATM_OWNER: AUTHOR: w63LLLNF IMPLEMENTED: LOE: ASSOCIATED_TESTCASES: ATM_REQLINK: 7B1C705A-6D90-11E9-BA9B-E393A081695E TRAINING: GROUP: MUSER: w63LLLNF SUB_FEATURE: SPEC_TAG: [22.080.1593] (FT-23717,FT-24474) [D4.0M-*] [+Ksk] If the IIT is running from boot code it shall not communicate with the SPDH and shall not pass any SPDH software version numbers to the SBC. PROCEDURE: 1.Place the DLM and FORCED ALTBOOT flag in the USB under ALTBOOT folder. 2.Power off the device and insert the Pendrive and power on the Device. 3.After the upgrade has been completed check the logs in Teraterm. RESOURCE_CONSUMEABLES: ATM_LOCKED: 0 APPROVE_SPAR: TESTCASE_PRODUCT: QA_TEAM: FILENAME: ATM_ID: 634353B6-306F-11EA-A563-FA84B48AF888 ATM_MCOMMENTS: Copied from "PUQE-CFT_Atlantis_2.0-D5.1/FS_22.080_Software_upgrade/Kiska_Specific/39876 To verify that if IIT will not communicate with the SPDH when upgrade from Bootcode and shall not pass any SPDH software version". RESOURCE_MEDIA: ATM_REQCOUNT: 1