TEST_TYPE: manual

INPUT: <p>1.Select Radio frequency of the network as 5 GHZ in the router.<br />
2.MFP should be upgraded with appropriate latest firm ware.<br />
3.Device configuration(Connect with available scanned network):<br />
a)In WEB UI, under Xerox Wireless Network Interface configuration page--Edit wireless settings--Scan for available networks--Select and Configure--Enter password of the network and save the settings.<br />
b)Make sure that device should get valid wireless IP address and IP address of the machine should be accessible.<br />
4.Wireshark should be installed in test PC.</p>

FILES:

AUTOMATION_GROUP:

AUTOMATABLE: yet_to_be_analyzed

ACTION_TO_BE_DONE:

CONSTRAINTS_DAR: IMP_98: High Level check\
Remarks: \
Owner: Karthika

TESTCASE_MODIFICATION_REQUIRED: no

MFF:

SPEC: FS 55.050 Wireless Connectivity

TESTCASE_FAMILY:

HISTORY:

REASON_FOR_AUTOMATABLE:

CDATE: 1683120868

TESTCASE_APPROVALS:

TESTCASE_STATE:

OUTPUT: <p>1.There should not be any interrupt in wireless network connection in the device.<br />
2.Any of these following packets should be available in trace with the details-- Protected flag: Data is protected-1<br />
- Disassociate<br />
- Deauthenticate<br />
- Action Frames: Block ACK Request/Response (AddBA); QoS Admission Control; Radio Measurement; Spectrum Management; Fast BSS Transition<br />
- Channel Switch Announcement directed to a client (Unicast)</p>

RESOURCE_HW:

MDATE: 1683120868, 1683122697

APPROVED_SPAR:

TEST_CASE_TYPE:

TC_WORK_LOCATION_CAT: work_from_office_tc

AUTHOR: q3SJKS2P

GROUP:

MUSER: q3SJKS2P, q3SJKS2P

SPEC_TAG: [55.050.121.02] (FT-27034, FT-27924) {DY 5.3, DY_TBD_Safari}  [-SafB1] Optional –The Device will use PMF based on the Access Point (AP)/ router configuration.  (If an AP is capable of PMF, the device will use PMF.  If an AP doesn’t support PMF, the device will not use PMF.)

SPEC_NUM:

PROCEDURE: <p>1.Configure PMF functionality as "Capable" in router.<br />
2.In WEB UI; login as System administrator(i.e.admin) and click on "Properties" tab.<br />
3.Navigate to Connectivity--Xerox Wireless Network Interface settings--Wireless settings--Select PMF as "Optional" and apply the settings.<br />
4.Open router WEB UI page; administration tab-- Packet capture--Start the packet capture in router.<br />
5.Reboot the device manually once device came to ready state after reboot; stop the packet capture in router.<br />
6.Download the packet capture file(Wireshark logs) from router WEB UI.<br />
7.Check the wireless network connection in the device and also check in Wireshark for any of these following packets:<br />
- Disassociate<br />
- Deauthenticate<br />
- Action Frames: Block ACK Request/Response (Adwa); QoS Admission Control; Radio Measurement; Spectrum Management; Fast BSS Transition<br />
- Channel Switch Announcement directed to a client (Unicast)</p>

DEVELOPMENT_COMPLETE_TIME:

ATM_LOCKED: 0

PRECONDITION_TO_BE_DONE:

PO_SIGNOFF_DATE:

APPROVE_SPAR:

RELEASE:

TESTCASE_PRODUCT:

FILENAME:

ATM_MCOMMENTS: Copied from "WFAST_Discovery_Regression_Connectivity/Testcases/FS_55.050_Wireless_Connectivity/18816"., Renamed from "WFAST_Discovery_Regression_Connectivity/Sanity/FS_55.050_Wireless_Connectivity_Sanity/129729".

RESOURCE_MEDIA:

COMMONALITY_DETAILS:

PRIORITY:

COMMON_FUNCTIONALITY:

APPROVED_QE:

TESTCASE_HEADLINE: When Wi-Fi network is with 5 GHZ, validate the "PMF-Optional" functionality in the device when PMF functionality is set to "Capable" in router and with scanned/discovered Wi-Fi network in the device.

TESTCASE_VERSION:

FEATURE:

APPROVE_SE:

SPEC_VERSION: 1.0045999999999999

TESTCASE_PLATFORM:

FILEDESC:

PROCESS:

TC_WEIGHTAGE:

COMPLEXITY_OUTPUT_VALIDATION: non_outliers

SKILL_SET:

TESTCASE_SOURCE:

APPROVE_QE:

COMPLEXITY_PRECONDITIONS: 0

TESTCASE_STEPS_ARE_RELATED_TO:

APPROVED_SE:

PLANNEDTIMESTAFF:

ATM_OWNER:

LOE:

ASSOCIATED_TESTCASES:

TRAINING:

ATM_REQLINK: 522C0078-2255-11EA-9D3C-28C590F3785B

DEVICE_CATEGORY: mfp

SUB_FEATURE:

RESOURCE_CONSUMEABLES:

AUTOMATION_TC_VALIDATION:

QA_TEAM:

ATM_ID: 8A8FCC18-7F9F-11EF-8A42-99F16D3DB5FC

APTEST_UPDATE_STATUS: no

ATM_REQCOUNT: 1

COMPETENCY: