ATM_ID: 8E6657D2-6C87-11F0-962F-30CFC0ACCDE0 MFF: PLANNEDTIMESTAFF: ID: ETL/Copy_Print_Testcases/165611 TESTCASE_HEADLINE: COPY BASIC FUNCTIONALITY - Staple - ILS-COP-24017 GROUP: FEATURE: SUB_FEATURE: INPUT: This test case will cover Staple functionality using In-Line Stapler (ILS) PROCEDURE: • Important: Please check Product spec or latest version of Plan-of-Record for sizes%2c types and maximun staple pages supported for Stapling on each MFP. The sizes/types supported on one MFP may not be applicable on other MFPs. • Please refer to the links below for Specifications and additional reference: Landscape RIP Specs v2.9 Media Size and Type Supported by input%2c output%2c finishing options.xlsx • note: Please copy the link and view on browser.. Paper sizes that support Stapling: • Set Copy To these paper sizes • Place 2 or more sheets of paper in ADF • Set Staple to ON or 1 Staple • Letter • A4 • SEF A5 • JISB5 • Executive • Folio • Oficio(Mexico) • Legal • Verify all pages are stapled • Verify correct staple position on the image output (Top Right of the page) • Set Copy From to Letter • Set Copy To to Auto size match (make sure Letter is loaded in the Tray) • Set Staple to 2 Staples • Place 2 sheets of paper in ADF • Start the Copy job • Verify image output is stapled ( 2 staple on the side of the image output) • Set Copy From to Letter • Set Copy To to Manual Feeder - plain paper A4 • Set Staple to 1 Staple • Place 2 sheets of pages in ADF • Start the Copy job • Verify image output is printed from Manual Feeder and stapled • Verify correct staple position is observed on the image output • Set Copy From to Letter • Set Copy To to JISB5 • Set Staple to 4 Staples • Place 2 sheets of paper in ADF • Start the Copy job • Verify image output is stapled ( 4 staple on the side of the image output) • Note: See Product Specs for the sizes that support 4 Staple Paper Types that support Stapling: • Set Copy To these paper types • Place 2 or more sheets of paper in ADF • Set Staple to ON or 1 Staple • Plain paper • Recycled • Glossy • Bond • Labels • Letterhead • Preprinted • Colored • Light • Heavy • Rough/Cotton • Custom Type [x] • Verify all pages are stapled • Verify correct staple position on the image output (Top Right of the page) Maximum Number of Stapled pages Testing: • Set Copy To to Letter/A4 • Load 50 sheets of Letter original in ADF • Set Staple to On • Start the Copy job • Verify 50 pages output is Stapled. • Set Copy To to Letter/A4 • Load 51 or more sheets of Letter original in ADF • Set Staple to On • Start the Copy job • Verify all pages are printed but NOT stapled EV 404266 - First set from the second multi-set copy job is printed prior to the last set from the first multi-set copy job EV 446861 - Allow GLOSSY media to be stapled or punched on YPP finishers - to address customer concern. • Glossy • Heavy Glossy Both media types will still be Not officially supported. The new media type support chart will now have the L changed to an A . A meaning allowed but not officially supported. Mixed Sizes Staple Support Refer to this spreadsheet: Media Size and Type Supported by input%2c output%2c finishing options.xlsx note: Please copy the link and view on browser.. Image output NOT Stapled Testing: • Set Copy From to Letter • Set Copy To to Letter/A4 • Set Staple to On or 1 Staple • Place 1 sheet of paper in ADF/Flatbed • Start the Copy job • Verify image output is not stapled (Staple is only supported on 2 or more pages output) • Verify image output exits in Standard Bin • Set Copy To to A6 or Statement • Set Staple to On or 1 Staple • Place 2 sheets of paper in ADF/Flatbed • Start the Copy job • Verify image output is not stapled (Staple is not supported on smaller sizes) • Verify image output exits in Standard Bin Paper Setup Finishing Options (ILS) 1-sided-Portrait 1 staple%2c top left corner 1-sided-Portrait 1 staple%2c top left corner 1-sided-Landscape 1 staple%2c top right corner 1-sided-Landscape 1 staple%2c top right corner 2-sided-Portrait - Long-edge 1 staple%2c top left corner 2-sided-Portrait - Long-edge 1 staple%2c top left corner 2-sided-Protrait-Short-edge 1 staple%2c top left corner 2-sided-Protrait-Short-edge 1 staple%2c top left corner 2-sided-Landscape-Long-edge 1 staple%2c top right corner 2-sided-Landscape-Long-edge 1 staple%2c top right corner 2-sided-Landscape-Short-edge 1 staple%2c top right corner 2-sided-Landscape-Short-edge 1 staple%2c top right corner • Set Copy To to Letter/A4 Transparency • Set Staple to ON or 1 Staple • Place 2 sheets of paper in ADF/Flatbed • Start the Copy Job • Verify image output is not stapled • Verify image output exits in Standard bin Test the scenario below with STAPLE using any options except Staple OFF: 1. Load ADF with 2 letter size originals 2. Load Tray 1 with only 1 page letter paper size and don t load any trays or MP feeder. 3. Go inside Copy workflow and set Finishing Options - Staple ON - any option(for example: 2 staples%2c top) 4. Start Copy. 5. Load Tray 1 with Plain Paper Letter prompt. 6. Select Finished Loading Paper. 7. Observe. Verify - Output will not be stapled nor exit on staple bin and should wait for Tray 1 to be loaded with letter paper size%2c panel will always prompt: Load Tray 1 with Plain Paper Letter - One page output should not be stapled. For more info%2c please refer to EV415801 • Perform the following using In-Line Stapler (ILS) - Attach ILS on either Paris/APalazzo - Perform all combination using Paper Setup using ILS: Repeat all Page Setup with the following ILS Staple Option: • 1 staple%2c bottom right corner (Portrait) • 1 staple%2c bottom left corner (Landscape) Please refer to EV416926 TEST_COVERED_BY: SRT_ANALYZATION: PROCESS: PRIORITY: TEST_TYPE: LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: TEST_CASE_TYPE: TESTCASE_SOURCE: SPEC: SPEC_NUM: SPEC_VERSION: SPEC_TAG: ATM_OWNER: APPROVE_QE: APPROVED_QE: APPROVE_SE: APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_FAMILY: TESTCASE_APPROVALS: CDATE: 1753798991 MDATE: 1753798991 MUSER: w4zfpb7v AUTHOR: w4zfpb7v ATM_MCOMMENTS: Imported from spreadsheet HISTORY: ATM_LOCKED: ATM_REQLINK: ATM_REQCOUNT: 0 QA_TEAM: TC_WEIGHTAGE: FILENAME: FILEDESC: FILES: RELEASE: COMPETENCY: AUTOMATION_GROUP: TESTCASE_STEPS_ARE_RELATED_TO: REASON_FOR_AUTOMATABLE: PRECONDITION_TO_BE_DONE: ACTION_TO_BE_DONE: COMMON_FUNCTIONALITY: COMMONALITY_DETAILS: CONSTRAINTS_DAR: DEVELOPMENT_COMPLETE_TIME: PO_SIGNOFF_DATE: COMPLEXITY_PRECONDITIONS: COMPLEXITY_OUTPUT_VALIDATION: AUTOMATABLE: AUTOMATION_CANDIDATE: TESTCASE_MODIFICATION_REQUIRED: APTEST_UPDATE_STATUS: DEVICE_CATEGORY: TC_WORK_LOCATION_CAT: AUTOMATION_TC_VALIDATION: