ATM_ID: 8E6B82B6-6C87-11F0-962F-30CFC0ACCDE0

MFF:

PLANNEDTIMESTAFF:

ID: ETL/Copy_Print_Testcases/165617

TESTCASE_HEADLINE: Copy Advanced Options - Fold-COP-24025

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: This test case will cover the functionality testing for Fold feature in Copy Advanced Options screen.
This test case will cover the functionality testing for Fold feature in Copy Advanced Options screen.

PROCEDURE: GUI Testing
 
 • 
 Remove Floor finisher from the Device
 
 • 
 Select Copy from Home screen panel
 
 • 
 Press Advanced Options button
 
 • 
 Verify Fold is NOT available in Copy Advanced Options screen
 
 
 • 
 Attach a Standard Floor Finisher on the Device
 
 • 
 Select Copy from Home screen panel
 
 • 
 Press Advanced Options button
 
 • 
 Verify Fold is NOT available in Copy Advanced Options screen
 
 
 • 
 Attach a Saddlestitch Floor Finisher on the Device
 
 • 
 Select Copy in Home screen panel
 
 • 
 Press Advanced Options button
 
 • 
 Verify Fold is Available and selectable in Copy Advanced Options screen
 
 
 • 
 Press Fold button
 
 • 
 Verify the General Layout and appearance of Fold screen
 
 • 
 Verify screen title is Fold 
 
 
 
 • 
 Verify the following options exist
 
 • 
 OFF
 
 • 
 V-Fold
 
 • 
 V-Fold Multiple
 
 • 
 C-Fold
 
 • 
 C-Fold Multiple
 
 • 
 Z-Fold
 
 • 
 Z-Fold Multiple
 
 • 
 Z-Fold Half Sheet
 
 
 
 
 **note: Bifold and Trifold options below are now expanded specific to V-Fold%2c C-Fold and Z-Fold 05/25/2023
 • 
 Verify default value of Fold is OFF
 
 • 
 Press Bifold button
 
 • 
 Press Bifold button
 
 • 
 Verify Bifold is in pressed state
 
 
 
 • 
 Touching and pressing one value s button put other values in available state
 
 • 
 Press Check/Done button
 
 • 
 Verify panel returns to Copy Advanced Options screen
 
 • 
 Verify Fold button is depressed with icon changes to Bifold icon
 
 
 
 • 
 Press Fold button
 
 • 
 Select Trifold and press Check/Done button
 
 • 
 Verify panel returns to Copy Advanced Options screen
 
 • 
 Verify Fold button is depressed with icon changes to Trifold icon
 
 • 
 Press Fold button again
 
 • 
 Select OFF and press Check/Done button
 
 • 
 Verify panel returns to Copy Advanced Options screen
 
 • 
 Verify Fold button is in available state with icon changes to OFF
 
 • 
 Select Fold button again
 
 • 
 Select a non-default value and press Cancel(x) button
 
 • 
 Verify panel returns to Copy Advanced Options screen
 
 • 
 Verify Fold button is still available with OFF icon
 
 • 
 Note:Pressing Cancel(button) with any non-default value selected will disregard changes
 
 • 
 Go back to Fold screen again
 
 • 
 Press Tips(?) button
 
 • 
 Verify that Tips screen is displayed
 
 • 
 Press Exit button of Tips screen
 
 • 
 Verify you are returned to Fold screen with the previous value still selected
 
 
 
 709932 Improper page order when printing Booklet Saddle Stitch job
 Fold options: V-fold%2c C-fold%2c Z-fold..
 Ensure that Tri-fold position (adjustments) are properly aligned in Diagnostics Menu prior to testing.. Please refer to PE Issue 562081/560948 : Lexmark Espa a: Add Tri-Fold position adjustments to Diagnostics Menu
 
 WC EC5 changes(P522)
 • Additonal option buttons are addedin Folded screen
 • Verify Staple and Fold and Fold without Stapling buttons are displayed in Fold screen under Off%2c Bi-Fold and TriFold options
 • Verify you can ONLY select One option at a time. When OFF is previously selected%2c selecting Staple and Fold will deselect OFF
 • Set FOLD to Staple and Fold
 • Press Done button
 • Place multiple originals in ADF
 • Press Start go button or Copy it button
 • Verify image output is folded as one and stapled in the center
 • Set Fold to Fold without Stapling
 • Press Done button
 • Place multiple originals in ADF
 • Press Start button or Copy it button
 • Verify image output is folded as one and NOT stapled
 Interaction with Create Booklet
 • Set Create Booklet to 1 Sided Booklet and press Staple and Fold or Fold without stapling
 • Press Done button
 • Verify Fold is OFF with Staple and Fold / Fold without Stapling option not in pressed state or higlighted
 • Also verify that changing Fold to Staple and Fold or Fold without Stapling will retain Create Booklet value to OFF
 • Go to Advanced Options - Fold
 • Press Staple and Fold or Fold without Stapling button
 • Press Done button
 • Press Create Booklet button
 • Set Create Booklet to 1 or 2 sided Booklet and press Staple and Fold or Fold without Stapling
 • Press Done button
 • Verify Incompatible settings appear%2c Incompatible settings. Fold will be modified 
 • Press Modify option button
 • Verify that Fold becomes OFF without any option higlighted or in pressed state
 Incompatibilities
 Fold is incompatible with other Finishing options(Staple%2cPunch and Booklet)
 
 • 
 Select COPY in Home screen panel
 
 • 
 Select Staple button
 
 • 
 Change Staple to any non-default value(ie. 1 Staple Portrait) and press Done button
 
 • 
 Go to Copy Advanced Options screen and press Fold button
 
 • 
 Set Fold to Bifold or Trifold and press Done button
 
 • 
 Verify an incompatible message pops up on the screen
 
 • 
 Verify pop up message is Incompatible settings. Staple will be modified with Modify and Do not Modify options
 
 • 
 Select Modify
 
 • 
 Verify panel returns to Copy Advanced Options screen
 
 • 
 Verify selected value for Fold is saved (Bifold or Trifold)
 
 • 
 Verify Staple value is now OFF
 
 • 
 Create the Incompatible message again
 
 • 
 This time%2c select Do not Modify from the pop up
 
 • 
 Verify panel returns to Copy Advanced Options screen
 
 • 
 Verify Fold is still set to default OFF
 
 • 
 Verify selected non-default value(1 Staple Portrait) for Staple is saved
 
 
 • 
 Select COPY in Home screen panel
 
 • 
 Go to Advanced Options screen
 
 • 
 Select Fold button
 
 • 
 Change Fold to any non-default value(Bifold or Trifold) and press Done button
 
 • 
 Go back to Copy Options screen and select Punch
 
 • 
 Set Punch to any non-default value(ie. 2 Punch top) and press Done button
 
 • 
 Verify an incompatible message pops up on the screen
 
 • 
 Verify pop up message is Incompatible settings. Fold will be modified with Modify and Do not Modify options
 
 • 
 Select Modify
 
 • 
 Verify panel returns to Copy Options screen
 
 • 
 Verify selected value for Punch is saved (2 Punch top)
 
 • 
 Verify Fold is now set to OFF
 
 • 
 Create the Incompatible message again
 
 • 
 This time%2c select Do not Modify from the pop up
 
 • 
 Verify panel returns to Copy Options screen
 
 • 
 Verify Fold is still set to non-default(Bifold or Trifold)
 
 • 
 Verify Punch is still set to OFF
 
 
 • 
 Select COPY in Home screen panel
 
 • 
 Go to Advanced Options screen
 
 • 
 Select Create Booklet button
 
 • 
 Set Create Booklet to any non-default value(ie. 1Sided or 2Sided Booklet) and press Done button
 
 • 
 Verify panel returns to Copy Advanced Options screen
 
 • 
 Press Fold button
 
 • 
 Set Fold to Bifold or Trifold and press Done button
 
 • 
 Verify an incompatible message pops up on the screen
 
 • 
 Verify pop up message is Incompatible settings. Create Booklet will be modified with Modify and Do not Modify options
 
 • 
 Select Modify
 
 • 
 Verify panel returns to Copy Advanced Options screen
 
 • 
 Verify selected value for Fold is saved (Bifold or Trifold)
 
 • 
 Verify Create Booklet value is now OFF
 
 • 
 Create the Incompatible message again
 
 • 
 This time%2c select Do not Modify from the pop up
 
 • 
 Verify panel returns to Copy Advanced Options screen
 
 • 
 Verify Fold is still set to default OFF
 
 • 
 Verify selected non-default value(1Sided or 2Sided Booklet) for Create Booklet is saved
 
 
 Fold is only supported on SEF Letter and SEF A4 paper sizes
 
 • 
 Set the following Copy to sources to these sizes
 
 • 
 Tray1 = SEF Letter
 
 • 
 Tray2 = Legal
 
 • 
 Tray3 = SEF A4
 
 • 
 Tray4 = SRA A3 
 
 • 
 Tray 5 = LEF Letter
 
 • 
 Multi Purporse Feeder = LEF A4
 
 
 
 • 
 Select COPY in Home screen panel
 
 • 
 Set Copy To to default Tray 1 with SEF Letter
 
 • 
 Go to Advanced Options screen and press Fold button
 
 • 
 Set Fold to Bifold or Trifold and press Done button
 
 • 
 Go back to Copy Options screen
 
 • 
 Select Copy to and change the option to Tray 2 with Legal 
 
 • 
 Verify an incompatible message pops up on the screen
 
 • 
 Verify incompatible message is Incompatible settings. Copy To will be modified with Modify and Do not Modify options
 
 • 
 Select Modify
 
 • 
 Verify panel returns to Copy Options screen
 
 • 
 Verify Copy To is now set to Tray 2 with Legal
 
 • 
 Go to Advanced Options screen
 
 • 
 Verify Fold button is grayed out ?
 
 • 
 Pressing the button will produce an error beep 
 
 • 
 Go back to Copy Options screen
 
 • 
 Change Copy To to Tray 3 with SEF A4
 
 • 
 Go to Advanced Options screen
 
 • 
 Verify Fold becomes Live and selectable
 
 • 
 Verify Fold will NOT support the following Copy To supported sizes
 
 • 
 A6
 
 • 
 Statement
 
 • 
 A5
 
 • 
 JISB B5
 
 • 
 Executive
 
 • 
 LEF A4
 
 • 
 LEF Letter
 
 • 
 Folio
 
 • 
 Oficio(Mexico)
 
 • 
 Legal
 
 • 
 JISB4
 
 • 
 A3
 
 • 
 11x17
 
 • 
 SRA3
 
 • 
 12x18
 
 • 
 Universal
 
 
 
 
 • 
 Go to COPY Advanced Options screen
 
 • 
 Set Fold to Bifold or Trifold and press Done button
 
 • 
 Go back to Copy Options screen
 
 • 
 Set Copy from to Mixed sizes
 
 • 
 Verify Copy To automatically changed to Auto size match
 
 • 
 Verify Incompatible message pops up on the screen
 
 • 
 Verify incompatible settings message is Incompatible settings. Fold will be modified with Modify and Do not Modify options
 
 • 
 Select Modify
 
 • 
 Verify panel returns to Copy Options screen
 
 • 
 Verify Copy from is now set to Mixed sizes and Copy To is Auto size match
 
 • 
 Go to Advanced Options screen
 
 • 
 Verify Fold button is grayed out ?
 
 • 
 Go back to Copy Options screen
 
 • 
 Change Copy To to Tray 3 with SEF A4
 
 • 
 Go to Advanced Options screen
 
 • 
 Verify Fold becomes Live and selectable
 
 
 • 
 With SEF Letter and SEF A4 loaded in Tray sources
 
 • 
 Set Copy from to Auto size sense
 
 • 
 Verify Copy To automatically changed to Auto size match
 
 • 
 Go to Advanced Options screen
 
 • 
 Verify Fold button is Live and selectable
 
 • 
 Without SEF Letter and SEF A4 in Tray sources
 
 • 
 Set Copy from to Auto size sense
 
 • 
 Verify Copy To automatically changed to Auto size match
 
 • 
 Go to Advanced Options screen
 
 • 
 Verify Fold button is grayed out ?
 
 
 Fold with Custom Job ON
 
 • 
 Select COPY in Home screen panel
 
 • 
 Set Copy To to SEF Letter or SEF A4
 
 • 
 Go to Advanced Options screen
 
 • 
 Set Custom Job to ON and press Done button
 
 • 
 Set Fold to Bifold or Trifold and press Done button
 
 • 
 Place multiple Letter size originals in ADF
 
 • 
 Press Start hard button
 
 • 
 Select Scan from Automatic Document Feeder
 
 • 
 Verify Scanning screen is displayed
 
 • 
 Verify scanning page... value increments according to the number of scanned pages
 
 • 
 Verify Post Scan screen of Custom job is displayed after scanning the pages from ADF
 
 • 
 Select Change Settings button
 
 • 
 Change Copy To to any of these sizes that do not support Fold
 
 • 
 A6
 
 
 
 • 
 Verify incompatible message pops up on the screen
 
 Warning: Additional contents are lost ... please go to the link below to view the complete test case.
 https://docs.google.com/a/lexmark.com/document/d/1V6F6JtBJv9ipiG31pFYTirQk7MaGGj1lxlFBQKwboPg/edit, *586125 PE Issue: Lexmark Italy: Unable to perform tray linking and booklet finishing at the same time
 
 Test simplex and duplex with tray linking to booklet and non booklet output bins.

TEST_COVERED_BY:

SRT_ANALYZATION:

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC:

SPEC_NUM:

SPEC_VERSION:

SPEC_TAG:

ATM_OWNER:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_FAMILY:

TESTCASE_APPROVALS:

CDATE: 1753798991

MDATE: 1753798991

MUSER: w4zfpb7v

AUTHOR: w4zfpb7v

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK:

ATM_REQCOUNT: 0

QA_TEAM:

TC_WEIGHTAGE:

FILENAME:

FILEDESC:

FILES:

RELEASE:

COMPETENCY:

AUTOMATION_GROUP:

TESTCASE_STEPS_ARE_RELATED_TO:

REASON_FOR_AUTOMATABLE:

PRECONDITION_TO_BE_DONE:

ACTION_TO_BE_DONE:

COMMON_FUNCTIONALITY:

COMMONALITY_DETAILS:

CONSTRAINTS_DAR:

DEVELOPMENT_COMPLETE_TIME:

PO_SIGNOFF_DATE:

COMPLEXITY_PRECONDITIONS:

COMPLEXITY_OUTPUT_VALIDATION:

AUTOMATABLE:

AUTOMATION_CANDIDATE:

TESTCASE_MODIFICATION_REQUIRED:

APTEST_UPDATE_STATUS:

DEVICE_CATEGORY:

TC_WORK_LOCATION_CAT:

AUTOMATION_TC_VALIDATION: