ATM_ID: 8E8AA33A-6C87-11F0-962F-30CFC0ACCDE0 MFF: PLANNEDTIMESTAFF: ID: ETL/Copy_Print_Testcases/165655 TESTCASE_HEADLINE: COPY BASIC FUNCIONALITY - Punch-COP-18992 GROUP: FEATURE: SUB_FEATURE: INPUT: This test case will verify the Basic Functionality of Punch available in Copy This test case will verify the Basic Functionality of Punch available in Copy This test case will verify the Basic Functionality of Punch available in Copy This test case will verify the Basic Functionality of Punch available in Copy PROCEDURE: • Set Punch to '2 Punch Left' • Place Letter original in ADF/Flatbed • Start the Copy Job • Verify finisher punched the image output correctly • Verify 2 holes on the left side of the image output • Verify image output is centered correctly • Set Punch to '3 Punch Left' • Place Letter original in ADF/Flatbed • Start the Copy Job • Verify finisher punched the image output correctly • Verify 3 holes on the left side of the image output • Verify image output is centered correctly • Set Punch to '4 Punch Left' • Place Letter original in ADF/Flatbed • Start the Copy job • Verify finisher punched the image output correctly • Verify 4 holes on the left side of the image output • Verify image output is centered correctly • The following paper sizes support Punch feature. Please see the product Spec to check the Punch values that each size support. • Load these sizes in Trays or Manual Feeder • Turn On or select any Punch non-default value • Start the Copy Job • A5 (2 Punch Left only) • JISB5 • Executive • Letter • A4 • Folio • Oficio(Mexico) • Legal • Universal • Auto size match • Verify finisher punched the image output correctly • Verify image output is centered correctly • The following paper types support Punch feature. Please see the product Spec to verify paper types that support Punching. • Load these paper types in Trays or Manual Feeder • Turn On or select any Punch non-default value • Start the Copy Job • Plain paper • Cardstock • Recycled • Labels • Glossy • Bond • Letterhead • Preprinted • Colored • Light paper • Heavy paper • Rough/Cotton • Custom Type [x] • Verify finisher punched the image output correctly • Verify image output is centered correctly EV446861 - Allow GLOSSY media to be stapled or punched on YPP finishers - to address customer concern. • Glossy • Heavy Glossy Both media types will still be Not officially supported. The new media type support chart will now have the L changed to an A . A meaning allowed but not officially supported., EV407400 (Statement and hole punch Behavior) If copy to is Statement%2c all holes are available and selectable in Hole Punch If you select 3/4 holes%2c then the output is incorrect Ideal Expected Output: only 2 Holes Available, Mahi Specific Punch Functionality Execute each of the Paper Size and verify that the table below match with the output Copy To Paper Size Paper Orientation 2-Holes 3-Holes 4-Holes Punch Hole Specification Letter Short-Edge ✔ ✘ ✘ Letter Long-Edge ✔ ✔ ✔ Legal Short-Edge ✔ ✘ ✘ JIS-B5 Short-Edge ✔ ✘ ✘ JIS-B5 Long-Edge ✔ ✔ ✔ JIS-B4 Short-Edge ✔ ✔ ✔ A4 Short-Edge ✔ ✘ ✘ A4 Long-Edge ✔ ✔ ✔ Executive Short-Edge ✔ ✘ ✘ Executive Long-Edge ✔ ✔ ✔ A5 Short-Edge ✘ ✘ ✘ A5 Long-Edge ✘ ✘ ✘ SRA3 Short-Edge ✘ ✘ ✘ A3 Short-Edge ✔ ✔ ✔ 12x18 Short-Edge ✘ ✘ ✘ 11x17 Short-Edge ✔ ✔ ✔ Oficio Short-Edge ✔ ✘ ✘ Folio Short-Edge ✔ ✘ ✘ Statement Short-Edge ✘ ✘ ✘ Statement Long-Edge ✘ ✘ ✘ A6 Short-Edge ✘ ✘ ✘ A6 Long-Edge ✘ ✘ ✘ CopyFrom:Mixed Sizes ✘ ✘ ✘ CopyFrom:Auto Size Sense ✔ ✔ ✔ Universal ✘ ✘ ✘ Legend: ✘ - not supported and option is not visible in th selection ✔ - supported and is visible and able to select EV459925 - Allow finishing support in Montego and Atlantic Mahi (FW4) • Folio • Oficio (Mexico) Make sure that we support this change these paper sizes., Mahi Specific Punch Functionality Load in Different Tray with supported paper Size%2c and modify its paper type as seen below. Verify that only the supported paper types enable punch. Paper Type Finisher Bin1 Finisher Bin2 Punch and Paper Type Support Plain Paper ✔ ✔ Card Stock ✔ ✘ Transparency ✘ ✘ Recycled ✔ ✔ Glossy ✔ ✔ Heavy Glossy ✔ ✘ Labels ✘ ✘ Vinyl Labels ✘ ✘ Bond ✔ ✔* Envelope ✘ ✘ Rough Envelope ✘ ✘ Letterhead ✔ ✔* Preprinted ✔ ✔ Colored Paper ✔ ✔ Light Paper ✔ ✔ Heavy Paper ✔ ✔^ Rouch Cotton ✔ ✘ Custom Type ✔* ✔* Legend: ✔ - Supported ✔* - This bin only supports Custom Types that map to a supported media type (such as Plain). ✔^ - Support is for punch and offset+punch only ✘ - Not Supported TEST_COVERED_BY: SRT_ANALYZATION: PROCESS: PRIORITY: TEST_TYPE: LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: TEST_CASE_TYPE: TESTCASE_SOURCE: SPEC: SPEC_NUM: SPEC_VERSION: SPEC_TAG: ATM_OWNER: APPROVE_QE: APPROVED_QE: APPROVE_SE: APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_FAMILY: TESTCASE_APPROVALS: CDATE: 1753798991 MDATE: 1753798991 MUSER: w4zfpb7v AUTHOR: w4zfpb7v ATM_MCOMMENTS: Imported from spreadsheet HISTORY: ATM_LOCKED: ATM_REQLINK: ATM_REQCOUNT: 0 QA_TEAM: TC_WEIGHTAGE: FILENAME: FILEDESC: FILES: RELEASE: COMPETENCY: AUTOMATION_GROUP: TESTCASE_STEPS_ARE_RELATED_TO: REASON_FOR_AUTOMATABLE: PRECONDITION_TO_BE_DONE: ACTION_TO_BE_DONE: COMMON_FUNCTIONALITY: COMMONALITY_DETAILS: CONSTRAINTS_DAR: DEVELOPMENT_COMPLETE_TIME: PO_SIGNOFF_DATE: COMPLEXITY_PRECONDITIONS: COMPLEXITY_OUTPUT_VALIDATION: AUTOMATABLE: AUTOMATION_CANDIDATE: TESTCASE_MODIFICATION_REQUIRED: APTEST_UPDATE_STATUS: DEVICE_CATEGORY: TC_WORK_LOCATION_CAT: AUTOMATION_TC_VALIDATION: