ATM_ID: 8E8B95A6-6C87-11F0-962F-30CFC0ACCDE0

MFF:

PLANNEDTIMESTAFF:

ID: ETL/Copy_Print_Testcases/165656

TESTCASE_HEADLINE: COPY BASIC FUNCTIONALITY - Offset Pages-COP-18993

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: This test case will verify the Basic Functionality of Offset Pages setting available in Copy screen

PROCEDURE: • Attach an Offset stacker%2c In Line Stapler and Super finisher on the device.
 • Perform the functionality tests below using all sizes supported for Offset. Feature should be tested on In line finisher%2c Super FInisher and Offset Stacker to make sure that Offset functionality works on these optional Output bins. Note also that sizes supported for Offset vary on each optional Output bins so kindly check the Product's Plan-of-Record for the list of supported sizes. 
o JISB5
o Executive
o Letter
o A4
o Legal
o Oficio
o Folio
o Statement
o Universal
o JISB4 (A3 Only)
o Tabloid(11x17) (A3 Only)
o A3 (A3 Only)
o 12x18 (A3 Only)
o SRA3(A3 Only)
Offset Pages is OFF
 • Set Output Bin in Admin Menus to Standard Bin or any Bin that does not support Offset
 • Set Offset Pages in Copy - Advanced options to OFF
 • Place 3 Letter size originals in ADF/Flatbed
 • Set Copies to 3
 • Press Copy it
 • Verify 3 copies of the job are printed in Standard Bin and not Offset
 • Set Output Bin in Admin Menus to Bin 1 or any Bin that supports Offset
 • Set Offset Pages in Copy - Advanced options to OFF
 • Place 3 Letter size originals in ADF/Flatbed
 • Set Copies to 3
 • Press Copy it
 • Verify 3 copies of the job are printed Bin 1 and not Offset
Offset Pages is Between Copies
 • Set Output Bin in Admin Menus to Standard Bin or any Bin that does not support Offset
 • Set Offset Pages in Copy - Advanced options to Between Copies
 • Place 3 Letter size originals in ADF/Flatbed
 • Set Copies to 3
 • Set Collate to Collated
 • Press Copy it
 • Verify 3 copies of the job are printed in Bin 1
 • Verify Copy job is printed according to this order: page #1%2c #2%2c #3%2c (offset) #1%2c #2%2c #3%2c (offset) #1%2c #2%2c #3
 • Set Output Bin in Admin Menus to Standard Bin or any Bin that does not support Offset
 • Set Offset Pages in Copy - Advanced options to Between Copies
 • Place 3 Letter size originals in ADF/Flatbed
 • Set Copies to 3
 • Set Collate to Not Collated
 • Press Copy it
 • Verify 3 copies of the job are printed in Bin 1
 • Verify Copy job is printed according to this order: page #1%2c #1%2c #1%2c (offset) #2%2c #2%2c #2%2c (offset) #3%2c #3%2c #3
 • Set Output Bin in Admin Menus to Bin 1 or any Bin that support Offset
 • Set Offset Pages in Copy - Advanced options to Between Copies
 • Place 3 Letter size originals in ADF/Flatbed
 • Set Copies to 3
 • Set Collate to Collated
 • Press Copy it
 • Verify 3 copies of the job are printed in Bin 1
 • Verify Copy job is printed according to this order: page #1%2c #2%2c #3%2c (offset) #1%2c #2%2c #3%2c (offset) #1%2c #2%2c #3
 • Set Output Bin in Admin Menus to Bin 1 or any Bin that support Offset
 • Set Offset Pages in Copy - Advanced options to Between Copies
 • Place 3 Letter size originals in ADF/Flatbed
 • Set Copies to 3
 • Set Collate to Not Collated
 • Press Copy it
 • Verify 3 copies of the job are printed in Bin 1
 • Verify Copy job is printed according to this order: page #1%2c #1%2c #1%2c (offset) #2%2c #2%2c #2%2c (offset) #3%2c #3%2c #3
Offset Pages is Between Jobs
 • Set Output Bin in Admin Menus to Standard Bin or any Bin that does not support Offset
 • Set Offset Pages in Copy - Advanced options to Between Jobs
 • Place 3 Letter size originals in ADF/Flatbed
 • Set Copies to 1
 • Set Collate to Collated
 • Press Copy it
 • Place 3 Letter size originals back to ADF/Flatbed
 • Press Copy it
 • Verify both jobs are printed in Bin 1
 • Verify Copy job is printed according to this order: Job1: #1%2c #2%2c #3 (offset) Job 2: #1%2c #2%2c #3
 • Verify that each Copy job has the same Offset position regardless of the value of Copies and Collation
 • Set Output Bin in Admin Menus to Bin 1 or any Bin that support Offset
 • Set Output Offset in Copy - Advanced options to Between Jobs
 • Place 3 Letter size originals in ADF/Flatbed
 • Set Copies to 3
 • Set Collate to Not Collated
 • Press Copy it
 • Place the 3 Letter size originals back to ADF/Flatbed
 • Press Copy it
 • Repeat 2 previous steps for the 3rd Copy job
 • Verify 3 copies of each job are printed in Bin 1
 • Verify Copy job is printed according to this order: Job 1: page #1%2c #1%2c #1%2c #2%2c #2%2c #2%2c #3%2c#3%2c #3 (offset) Job2: age #1%2c #1%2c #1%2c #2%2c #2%2c #2%2c #3%2c#3%2c #3 (offset) Job3: page #1%2c #1%2c #1%2c #2%2c #2%2c #2%2c #3%2c#3%2c #3
 • Verify that each Copy job has the same Offset position regardless of the value of Copies and Collation

TEST_COVERED_BY:

SRT_ANALYZATION:

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC:

SPEC_NUM:

SPEC_VERSION:

SPEC_TAG:

ATM_OWNER:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_FAMILY:

TESTCASE_APPROVALS:

CDATE: 1753798991

MDATE: 1753798991

MUSER: w4zfpb7v

AUTHOR: w4zfpb7v

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK:

ATM_REQCOUNT: 0

QA_TEAM:

TC_WEIGHTAGE:

FILENAME:

FILEDESC:

FILES:

RELEASE:

COMPETENCY:

AUTOMATION_GROUP:

TESTCASE_STEPS_ARE_RELATED_TO:

REASON_FOR_AUTOMATABLE:

PRECONDITION_TO_BE_DONE:

ACTION_TO_BE_DONE:

COMMON_FUNCTIONALITY:

COMMONALITY_DETAILS:

CONSTRAINTS_DAR:

DEVELOPMENT_COMPLETE_TIME:

PO_SIGNOFF_DATE:

COMPLEXITY_PRECONDITIONS:

COMPLEXITY_OUTPUT_VALIDATION:

AUTOMATABLE:

AUTOMATION_CANDIDATE:

TESTCASE_MODIFICATION_REQUIRED:

APTEST_UPDATE_STATUS:

DEVICE_CATEGORY:

TC_WORK_LOCATION_CAT:

AUTOMATION_TC_VALIDATION: