ATM_ID: 8EA2ECC4-6C87-11F0-962F-30CFC0ACCDE0 MFF: PLANNEDTIMESTAFF: ID: ETL/Copy_Print_Testcases/165680 TESTCASE_HEADLINE: COPY FUNCTIONALITY - Staple and Punch combination-COP-18966 GROUP: FEATURE: SUB_FEATURE: INPUT: This test case will verify the interaction of Punch and Staple features.\ Note: Just ignore large sizes that is not supported if you are using A4 printers (Palazzo) PROCEDURE: Note: • Despite the precautions of the GUI%2c there will always be cases where finishing%2c as set up through the copy screen%2c is actually impossible. • In these cases (such as a mixed size that is valid for the standard bin but not for a finisher bin) it is acceptable for the device to either: • Route the non-valid size to a bin appropriate for that size. • Treat the non-valid size as an unknown size and prompt the user to pick a size. • So long as the device doesn t crash during these cases%2c the Behavior is acceptable EV452986 - Copy Output cannot be stapled and/or punched if the Copy To is set to Auto Size Match . • Set Copy From = Letter • Set Copy To = Auto Size Match • Set Staple = On • Set Punch = On • Verify that copied output should be stapled and/or punched as expected. • Verfy that the UI will retain the selected values after performing the copy job. • Verify that no hang/crash issue occur. • Repeat previous steps and set copy from to other Fixed Sizes (Note** Make sure that Tray is loaded with that copy from size) Finishing Incompatibilities When Result Copy To is Auto Size Match and Copy From is any size that is not loaded in the trays OR Copy To is Auto Size Match and Copy From is Mixed sizes All Finishing Options are grayed out Copy To is JIS-B5 and LEF loaded OR Copy To is Auto Size Match and Copy From is JIS-B5 and JIS-B5 LEF is loaded OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and JIS-B5 LEF is loaded 2 hole side punch is live All single staples are live 2 staple side is live Copy To is Letter and Letter SEF loaded OR Copy To is Auto Size Match and Copy From is Letter and Letter SEF is loaded OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and Letter SEF is loaded All single staples are live 2 staple top is live 2 hole punch top is live Create Booklet/ Saddle Stitch is live Copy To is Letter and Letter LEF loaded OR Copy To is Auto Size Match and Copy From is Letter and Letter LEF is loaded OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and Letter LEF is loaded All single staples are live 2 staple side is live 4 staple is live 3 hole punch side is live 2 hole punch side is live 4 hole punch side is live Copy To is A4 and A4 SEF loaded OR Copy To is Auto Size Match and Copy From is A4 and A4 SEF is loaded OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and A4 SEF is loaded All single staples are live 2 staple top is live 2 hole punch top is live Create Booklet/ Saddle Stitch is live Fold individual pages is live Copy To is A4 and A4 LEF loaded OR Copy To is Auto Size Match and Copy From is A4 and A4 LEF is loaded OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and A4 LEF is loaded All single staples are live 2 staple side is live 4 staple is live 3 hole punch side is live 2 hole punch side is live 4 hole punch side is live Copy To is Folio OR Copy To is Auto Size Match and Copy From is Folio OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and Folio is loaded All single staples are live 2 staple top is live%2c 2 Punch top is live Create Booklet/ Saddle Stitch is live Fold individual pages is live Copy To is Legal OR Copy To is Auto Size Match and Copy From is Legal OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and Legal is loaded All single staples are live 2 staple top is live%2c 2 Punch top is live Create Booklet/ Saddle Stitch is live Fold individual pages is live Copy To is Officio OR Copy To is Auto Size Match and Copy From is Officio OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and Officio is loaded All single staples are live 2 staple top is live%2c 2 Punch top is live Create Booklet/ Saddle Stitch is live Fold individual pages is live Copy To is JIS-B4 OR Copy To is Auto Size Match and Copy From is JIS-B4 OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and JIS-B4 is loaded All single staples are live 2 staple top is live 2 hole punch top is live 3 hole punch top is live 4 hole punch top is live Create Booklet/ Saddle Stitch is live Fold individual pages is live Copy To is A3 OR Copy To is Auto Size Match and Copy From is A3 OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and A3 is loaded All single staples are live 2 staple top is live 2 hole punch top is live 3 hole punch top is live 4 hole punch top is live Create Booklet/ Saddle Stitch is live Fold individual pages is live Copy To is Tabloid OR Copy To is Auto Size Match and Copy From is Tabloid OR Copy To is Auto Size Match%2c Copy From is Auto Size Sense and Tabloid is loaded All single staples are live 2 staple top is live 2 hole punch top is live 3 hole punch top is live 4 hole punch top is live Create Booklet/ Saddle Stitch is live Fold individual pages is live Copy To is Universal AND the Universal Width is between 210 mm and 297 mm and the Universal Height is between 182 mm and 432 mm OR Copy To is Auto Size Match and Copy From is Universal AND the Universal Width is between 210 mm and 297 mm and the Universal Height is between 182 mm and 432 mm All applicable staples are live (options active for closest smaller paper size to the Universal size) Create Booklet/ Saddle Stitch is grayed out Fold individual pages is grayed out Hole punch options are grayed out The above Finishing incompatibilities are expected be performed in all FInishing hardware supported for A4 machines%2c these are: *In-Line Finisher *Super Finisher The above Finishing Incompatibilities are expected to be performed in all Finishing hardware supported for A3 machines%2c these are: *2/3 Holes Standard Finisher *2/3 Holes Saddlestitch Finisher *2/4 Holes Standard Finisher *2/4 Holes Saddlestetch Finisher Using the above Finisher(s)%2c perform the Finishing Matrix for Staple%2cPunch%2c Fold Individual Pages and Booklet found here. Randomly set Auto Center to ON and OFF. Verify that correct finishing is/are observed on the output and image is correctly scaled on each page. • Test and Verify the Following Combinations. For any updates or changes of the finishing options behavior please see this document. Collate On with Staple/Punch/Separator Sheets/Separator Sheet Source • Load Multiple Originals in ADF/FB using Random combinations of All Supported Paper Sizes. • Set Collate to On%2c Copies to 3%2c and Staple to On. • Complete the test with the following combinations: • NOTE: Use special sizes like Universal and Officio as separator sheet size. There are MFPs like Spinnaker that does not support Universal and Officio as a valid Separator sheet size. Loading these sizes in Separator Sheet source will disable Separator sheets button of Copy Advanced Options screen. Refer to ITR#118199 Separator Sheets Staple Between Copies 1 Staple Portrait Between Jobs 1 Staple Landscape Between Pages 2 Staple top Between Copies 2 Staple left Random 4 Staple left Between Jobs 2 punch top Between Pages 3 or 4 punch top Between Copies 2 punch left Between Jobs 3 or 4 punch left • Verify Finisher Staple the Pages Appropriately. • If separator sheets is set to Between Pages • Verify that Output are stapled together IF the size of Copy To match the size of Separator sheets and both are feed in the same direction • Verify that Output is NOT Stapled and printed separately if the size of Copy to do NOT match the size of Separator sheets. • Set Staple to On. • Load Multiple Originals from ADF/FB using All Supported Paper Sizes on the Printer: Content Document Type Staple Sides (Duplex) Options Text Black and White Laser 1 staple 1 to 1 sided Portrait/Landscape Overlay - Confidential Header/ Footer - Date/Time/All Pages Background Removal - +4 Text Color Laser 1 staple 1 to 2 sided Portrait/Landscape Overlay - COPY Edge Erase - Random Sharpness - 1 Text Inkjet 1 staple 2 to 1 sided Portrait/Landscape Scale - 250% Darkness - 9 Color Balance - Random Text Photograph 1 staple 2 to 2 sided Portrait /Landscape Auto Center - ON Header/Footer - Custom Text/ All but First Page Color Droputout - Random Text/Photo Magazine 1 staple 1 to 1 sided Portrait/Landscape Paper Saver - 4up Landscape w/ borders Darkness - 2 Mirrror Image - ON Text/Photo Newspaper 1 staple 1 to 2 sided Portrait/Landscape Scan Edge to Edge - ON Shadow Detail - -4 Darkness - 7 Text/Photo Press 1 staple 2 to 1 sided Portrait/Landscape Margin Shift - random Overlay - Custom Text Temparature - random Text/Photo General Office 1 staple 2 to 2 sided Portrait/Landscape Negative Image - ON Darkness - 3 Header/Footer - Bates Number/First Page Only Photo Black and White Laser 2 staple top 1 to 1 sided Portrait/Landscape Color - MONO/OFF Color Dropout - Random Paper Saver - 2up Portrait Photo Color Laser 2 staple top 1 to 2 sided Portrait/Landscape Overlay - Draft Darkness - default Scale - 100% Photo Inkjet 2 staple top 2 to 1 sided Portrait/Landscape Paper Saver - 2Up Landscape Color Balance - Random Auto Center - ON Photo Photograph 2 staple top 2 to 2 sided Portrait/Landscape Margin Shift - Random Edge erase - Random Overlay - Urgent Graphic Magazine 2 staple left 1 to 1 sided Portrait/Landscape Header Footer - Random Auto Center - ON Scale - 25% Graphic Newspaper 2 staple left 1 to 2 sided Portrait/Landscape Color - OFF Overlay - Confidential Header/Footer - Random Graphic Press 2 staple left 2 to 1 sided Portrait/Landscape Scan Edge to edge - ON Margin Shift - Random Scale - 150% Graphic General Office 2 staple left 2 to 2 sided Portrait/Landscape Auto Center - ON Punch - random Color - Mono/Off Random Random 4 staple left 1 to 1 sided Portrait/Landscape Custom Job - ON Darkness - 2 Shadow Detail - +4 Random Random 4 staple left 1 to 2 sided Portrait/Landscape Auto Center ON Color Dropout - random Negative image - ON Random Random 4 staple left 2 to 1 sided Portrait/Landscape Background Removal - -4 Sharpness - 5 Overlay - Custom Text Random Random 4 staple left 2 to 2 sided Portrait/Landscape Punch - random Custom Job - ON Color Dropout - random • Observe correct orientation of OVERLAY and Header/Footer on the output • Verify that selected Copy options are correctly applied on the image output • Verify Finisher Staple the Pages Appropriately. • Select any non-default Staple value then create a COPY Shortcut • Verify that Staple value is saved on the shortcut • Invoke the shortcut and verify correct staple is applied on the output TEST_COVERED_BY: SRT_ANALYZATION: PROCESS: PRIORITY: TEST_TYPE: LOE: RESOURCE_HW: RESOURCE_CONSUMEABLES: RESOURCE_MEDIA: SKILL_SET: TEST_CASE_TYPE: TESTCASE_SOURCE: SPEC: SPEC_NUM: SPEC_VERSION: SPEC_TAG: ATM_OWNER: APPROVE_QE: APPROVED_QE: APPROVE_SE: APPROVED_SE: APPROVE_SPAR: APPROVED_SPAR: ASSOCIATED_TESTCASES: TRAINING: TESTCASE_VERSION: TESTCASE_STATE: TESTCASE_PLATFORM: TESTCASE_PRODUCT: TESTCASE_FAMILY: TESTCASE_APPROVALS: CDATE: 1753798991 MDATE: 1753798991 MUSER: w4zfpb7v AUTHOR: w4zfpb7v ATM_MCOMMENTS: Imported from spreadsheet HISTORY: ATM_LOCKED: ATM_REQLINK: ATM_REQCOUNT: 0 QA_TEAM: TC_WEIGHTAGE: FILENAME: FILEDESC: FILES: RELEASE: COMPETENCY: AUTOMATION_GROUP: TESTCASE_STEPS_ARE_RELATED_TO: REASON_FOR_AUTOMATABLE: PRECONDITION_TO_BE_DONE: ACTION_TO_BE_DONE: COMMON_FUNCTIONALITY: COMMONALITY_DETAILS: CONSTRAINTS_DAR: DEVELOPMENT_COMPLETE_TIME: PO_SIGNOFF_DATE: COMPLEXITY_PRECONDITIONS: COMPLEXITY_OUTPUT_VALIDATION: AUTOMATABLE: AUTOMATION_CANDIDATE: TESTCASE_MODIFICATION_REQUIRED: APTEST_UPDATE_STATUS: DEVICE_CATEGORY: TC_WORK_LOCATION_CAT: AUTOMATION_TC_VALIDATION: