ATM_ID: 9C0640D0-65F8-11E7-A8F9-28F7D30A4651 MFF: PLANNEDTIMESTAFF: ID: WFAST_Accounting/Testcases/FS_18.050_Job_Based_Accounting/9164 TESTCASE_HEADLINE: Validate job-owner-domain, fax-call-record, job-validated when batch send is enabled and job submitted via print driver to Single destination GROUP: FEATURE: SUB_FEATURE: INPUT:
1) Fax card should be installed
2) Fax service should be configured and enabled
3) Neither Favorites nor DAB is configured as fax service defaults
4) Batch send should be enabled
5) Install print driver in PC.
1) Open the word document and select print
2) Select print properties and select Fax from the job type drop down.
3) Click Add recipient radio button and add name(Rajesh) and fax number(9127)
4) Select the print
5) Before completion of the 1st job send the another set of document from the same print driver and submit the job to the same destination(9127).
6) Navigate to job status and select active job status tab
7) Verify that First job should start with processing dialing sending and completion.
8) After completion of the 1st job
9) The second job should start sending directly to destination by using the same call and both the fax job should reached the destination successfully
10) View the JBA log from the JBA Test tool.
11) Verify the following :
a) Verify if job-owner-domain is listed in JBA log
b) Verify if fax-call-record is listed in JBA log
c) Verify if job-validated is listed in JBA log
Verify that
a) job-owner-domain should be tracked in JBA log.
b) fax-call-record should be tracked in JBA log.
c) job-validated should be tracked in JBA log.