ATM_ID: 9C1F9E22-65F8-11E7-A8F9-28F7D30A4651 MFF: PLANNEDTIMESTAFF: ID: WFAST_Accounting/Testcases/FS_18.050_Job_Based_Accounting/9181 TESTCASE_HEADLINE: Validate that job-type, job-identifier, job-owner when batch send is disabled and job submitted via print driver to multiple destination GROUP: FEATURE: SUB_FEATURE: INPUT:
1) Fax card should be installed
2) Fax service should be configured and enabled
3) Neither Favorites nor DAB is configured as fax service defaults
4) Batch send should be disabled
5) Install print driver in PC.
1) Open the word document and select print
2) Select print properties and select Fax from the job type drop down list.
3) Click Add recipient radio button and add name(Rajesh) and fax number(9127)
4) Select the print
5) Before completion of the 1st job send the another set of document from the same print driver and submit the job to the different destination (9171).
6) Navigate to job status and select active job status tab
7) Verify that First job should start with processing dialing sending and completion.
8) After completion of first job second job should be start to dial the second destination and user can hear the dialing tone of the second job
9) View the JBA log from the JBA Test tool.
10) Verify the following :
a) Verify if job-type is listed in JBA log
b) Verify if job-identifier is listed in JBA log
c) Verify if job-owner is listed in JBA log
Verify that
a) job-type should be tracked in JBA log.
b) job-identifier should be tracked in JBA log.
c) job-owner should be tracked in JBA log.